NorStone Rotative Wall Mount for Sonos Era 100

Instruction Manual

Parts List

A (x1): Wall bracket
B (x1): Mounting plate
C (x1): Speaker holder base
D (x1): Speaker retention arm
E (x3): M5x6 screws (for attaching wall bracket to mounting plate)
F (x1): M5x16 screw (for securing speaker)
G (x3): ST4.8x38 screws (for wood wall installation)
H (x3): Ø8x36 screws (for solid concrete/brick wall installation)

Installation

Wood Wall Installation

Attach the mounting plate (B) to a wood wall. Drill pilot holes using a Ø3.5mm (1/8") drill bit. Use the provided ST4.8x38 screws (G). Ensure a distance of 50mm (2") from the ceiling or floor. [✅] Suitable for wood walls.

Solid Concrete / Brick Wall Installation

Attach the mounting plate (B) to a solid concrete or brick wall. Drill holes using a Ø8mm (5/16") drill bit. Use the provided Ø8x36 screws (H). Ensure a distance of 50mm (2") from the ceiling or floor. [✅] Suitable for solid concrete or brick walls.

Assembly Instructions

Step 2: Assemble Wall Mount Bracket

Attach the wall bracket (A) to the speaker holder base (C) using three M5x6 screws (E). Subsequently, attach this assembled unit to the mounting plate (B).

Step 3: Mount the Speaker

Place the Sonos Era 100 speaker into the assembled mount. Secure the speaker using the M5x16 screw (F).

Step 4: Attach to Wall Plate

Align the assembled speaker and mount with the mounting plate (B) that has been fixed to the wall. Slide the mount onto the plate. The mount is now installed and ready for positioning.

Features

✅ Compatible with Sonos Era 100 speakers.
⚖️ Maximum Load Capacity: 3 kg.
? Adjustable Tilt: ±45 degrees.
↘️ Additional Tilt: -18 degrees.
↕️ Can be positioned at 0 degrees (neutral).