MAUL Ferroband Magnetic Wall Strip - Technical Datasheet
Article Number: 62120
Product Overview
This document provides the technical specifications for the MAUL Ferroband magnetic wall strip. The product is supplied in a roll and is designed for flexible application on walls, including around corners.
The MAUL Ferroband is constructed from fine steel sheet, which is finished with a white lacquer. It is characterized by its scratch-resistant surface and magnet-receptive properties, allowing it to hold magnetic items.
The reverse side of the strip is coated with a self-adhesive cushioning foam, protected by a green film. This adhesive is designed to be removable without leaving residue.
Key Features and Application Guidelines
- Versatile Application: Supplied in a roll, it can be applied from wall to wall and around corners.
- Customizable Length: The strip can be easily cut to the desired length using standard scissors.
- Removable Adhesive: The self-adhesive cushioning foam can be removed from surfaces without leaving residue.
- Surface Preparation: For optimal adhesion, the substrate must be clean and free from dust.
- Surface Compatibility: The product is conditionally suitable for textured or woodchip wallpaper with a coarse-grained structure.
- Packaging: The original cardboard packaging is designed to function as a dispenser box for convenience.
Technical Specifications
Material Composition
Front Surface: Fine steel sheet
- Finish: White lacquered
- Properties: Scratch-resistant, magnet-receptive
Backing: Self-adhesive cushioning foam with a green protective film
Dimensions
Product Dimensions (as supplied on roll):
- Length (L): 25000 mm (25 meters)
- Width (B): 35 mm
- Thickness (H): 1 mm
Steel Sheet Thickness: 0.13 mm
Packaging Dimensions:
- Length: 255 mm
- Width: 255 mm
- Height: 41 mm
Weight
- Product Weight: 1.163 kg
- Gross Weight (including packaging): 1.239 kg
Document Date: 18.01.2022
Document Reference: 6212009.350B
