Product Description
This technical datasheet describes the MAUL Ferroband magnetic wall strip, a versatile solution for creating magnetic surfaces on walls.
Key Features:
- Magnetic wall strip supplied in roll form, allowing for seamless installation from wall to wall and around corners.
- Easily cut to the desired length using standard scissors.
- Features a self-adhesive foam padding with a green protective film on the back.
- The adhesive is not removable without residue.
- Requires a clean and dust-free substrate for optimal adhesion.
- Suitable for smooth surfaces; conditionally suitable for textured or coarse-grained wallpaper.
Diagrammatic Representation
The product is depicted as a long, thin strip. The front side is made of white lacquered, scratch-resistant, magnet-retaining steel fine sheet with a total length of 5000 mm. The back side features a self-adhesive foam padding covered by a green protective film. A cross-section view indicates the dimensions: a width (B) of 35 mm, a thickness (H) of 1 mm, and the steel sheet itself has a thickness of 0.13 mm.
Technical Specifications
Product Dimensions:
Length (L): 5000 mm
Width (B): 35 mm
Height/Thickness (H): 1 mm
Product Weight: 0.236 kg
Packaging Dimensions:
Length (L): 127 mm
Width (B): 127 mm
Height (H): 36 mm
Weight including packaging: 0.267 kg
