Introduction
Welcome to the Cinnado D1 IP Camera. This guide will help you set up your new camera quickly and easily. Learn how to download the necessary app, register an account, and connect your camera to your network for seamless monitoring.
Getting Started
Follow these steps to get your Cinnado D1 IP Camera up and running:
- Download & Install App: Search for "Wansview Cloud" on the App Store or Google Play and install it on your smartphone.
- Register Account: Open the app and follow the on-screen instructions to create your account. Ensure your password meets the specified criteria for security.
- Add Device: Connect your smartphone to a 2.4Ghz WiFi network. Open the app, tap "Add Device" or the "+" icon, and select "Cinnado" then "Model D1".
Camera Setup & Connection
- Camera Setup: Place the camera near your router (within 3 feet). Power on the camera and wait for the indicator light to flash blue and red. Confirm by tapping "Flashing" in the app.
- WiFi Setup: Enter your 2.4Ghz WiFi name and password. Use the provided icon to check the password. If the WiFi name isn't recognized automatically, ensure GPS and location services are enabled on your smartphone.
- QR Code Scanning: Place the QR code from your phone 3-8 inches in front of the camera lens. Listen for the "QR code scanning is successful" confirmation and press "Next".
- Wait for Connection: The camera will connect to your WiFi. A solid blue light indicates a successful connection. You can then name your camera and view the live video.
Troubleshooting & Support
If you encounter issues, consult the Q&A section for solutions to common problems such as scanning failures, WiFi connection issues, or the app showing "Offline". For further assistance, contact Cinnado customer support at support.us@cinnado.com or support.uk@cinnado.com.
For more information on product compliance and specifications, please visit wansview.com.
