Instruction Manual for Rayrun models including: TM10, TM20, TM30, TM40, TM10 LED Controller, TM10, LED Controller, Controller
BLE Mesh LED controller
Umi Smart Wireless
LED Controller
Model: TM10 / TM20 / TM30 / TM40 (-A)
Single color to RGBW Model Remote + Smartphone Dimming / Effects Group / Scene
BLE Mesh
Remtoe & Phone
DC 5-24V
Group / Scene
Ultra Compact
Overheat Protection
2. LED output
Connect constant voltage LED loads to these cables. Please make sure the LED rated voltage is same as the power supply and each channel's maximum load current is in range of the controller rated current.
Please refer to following output wiring diagram for different models:
CAUTION! The controller will be permanently damaged if output cables short circuit. Please make sure the output cables are well insulated to each other.
-
warm cool
BRG
BRGW
Single color
Tunable white
RGB
RGBW
Model TM40-A can be configured to different application for single color, CCT, RGB or RGBW. For different application, the 1-4 channel function is mapped as following table:
TM40 Application Single color
CCT
RGB
RGBW
CH1 (white cable)
White
Cool white
No use
White
CH2 (green cable)
White
Cool white
Green
Green
CH3 (red cable)
White
Warm white
Red
Red
CH4 (blue cable)
White
Warm white
Blue
Blue
Introduction
This series LED controllers are designed to drive constant voltage LED products in voltage range of DC524V. They can be controlled by the Umi compatible remote controllers and Smartphone app (-A version only). With advanced BLE mesh technology, controllers can work synchronously with a robust connection. With the ultra compact design, user can set up LED applications flexibly and conveniently.
Function & Size
1
2
14mm
38mm 50mm
1. Power supply input The controller supply voltage range is from DC 5V to
24V. The white power cable should be connected to power positive and gray to negative (For other cable color, please refer to the labels). The LED output voltage is at same level as the power voltage, please make sure the power supply voltage is correct and the power rating is capable for the load.
1
Wiring
Please connect the controller output to LED loads and power supply to the controller power input. The power supply voltage must be same as the LED load's rated voltage. Check all cables to be well connected and insulated before power on.
To 110/230 5-24V DC output AC power Power supply
LED Controller
5-24V DC
LED Strips
Umi wireless remote controller
Umi Smart App (-A version only)
Operation
3. Pairing remote controllers
The controller can be paired with compatible Umi remote controller for operation. To pair or unpair the remote controller, user needs to connect and disconnect the power of controller and press specific combo keys on the remote controller. For detailed method, please refer to the remote controller's user's manual. Each controller can be paired up to total 5 remote controllers.
2
3
4. Control by smartphone For -A version controller, besides Umi wireless remote
controllers, it can also be controlled by Umi Smart app. User can operate the controller from remote and/or Umi Smart app. The status and group/scene features will be synchronized from remote controller and App. Please search and download `Umi Smart' app from Apple app store or Google play market to setup. There will also be a QR code on the controller for app download link.
Advanced features
5. Change model function (TM40 only) TM40-A controller's function can be changed
from 1 channel (single color) to 4 channels (RGB+White) by Umi Smart app.
To change the model function, please use the Umi Smart app and detect factory default devices in `Discover nearby' function and then tap the item icon and select `change function' menu to proceed.
6. Force turning on
The controller will restore to the last on/off status on each power on. To force turn on the controller at OFF status, user need to connect and disconnect the power of the controller for 3 times in a short time. After this operation, the controller will be rest to ON status.
7. Overheat Protection
The controller has overheat protection feature and it can protect the controller from damage for some abnormal usage such as overloading which generates excess heat. The controller will stop working and try to recover when temperature drops to a safe range. Please check the output current and make sure it's under the controller's rated value at this situation.
4
5
Specification
Model
TM10
TM20
TM30
TM40
Function Working voltage Rated output current Wireless connection Smartphone app support Communication distance
Output mode Physical PWM level
Dynamic effects Overheat protection
Dimension
Single color
CCT
RGB
4-in-1
DC 5-24V
6A
2x4A
3x3A
4x2A
Umi protocol based on SIG BLE Mesh
Yes, -A version only
>20 meters at open area
PWM constant voltage
4000 steps
9 effects
NA
42 effects 42 effects
Yes
50x15x7mm
App download link: (for -A version only)
Umi
LED
:TM10/TM20/TM30/TM40(-A)
R G B W + / /
+
5-24V
/
LEDDC5-24V L E D U m i A p p- A
1
2
14mm
38mm 50mm
1.
D C5 V2 4 V
1
2.LED
L E D L E D P W M L E D
-
BRG
BRGW
RGB
RGBW
TM40RGBRGBW
TM40
RGB RGBW
1 ()
2 ()
3 ()
4 ()
LED L E D
5-24V
LED
1-4LED
5-24V DC
Umi
UmiSmartApp (-A)
3.
U m i app 5
2
3
4. -A
U m iS m a r tA p p
app a p p a p p "UmiSmart" App
5.TM40 TM40-AUmiSmartapp
R G B W
UmiSmartAPP "" " "
6. /
` ' 3
7.
4
5
APP PWM
TM10
TM20
TM30
TM40
6A
9
RGB
DC5-24V
2x4A
3x3A
UmiSIGBLEMesh
,-A
>20
PWM
4000
NA
42
50x15x7mm
41 4x2A
42
UmiSmartAPP:(-A)
Corel PDF Engine Version 18.1.0.661 CorelDRAW X8