User Guide for HUSKY models including: FC182832T01WT, FC182832T01WT Base Folding Cabinet, FC182832T01WT, Base Folding Cabinet, Folding Cabinet
5 days ago — Take the keys put in the bag together with the Instruction Manual to unlock and open the Cabinet doors. Take out the Hardware package from the inside of the ...
2 giorni fa — THANK YOU. We appriciate the trust and confidence yu have placed in Husky through the purchase of this cabinet. We strive to continually.
Item # ...... Model # FC182832T01WT USE AND CARE GUIDE 18.3IN X 28IN X 32.8IN HUSKY BASE FOLDING CABINET Due to continuing improvements, the actual product may differ slightly from product described herein. THANK YOU We appriciate the trust and confidence yu have placed in Husky through the purchase of this cabinet. We strive to continually creat quality products designed to enhance your home. Visit us online to view our full line of products available for your home improvement needs. Thank you for choosing Husky. Table of Contents 2 5 2 8 2 8 3 3 Maximum load for each door Maximum load for each shelf Maximum load for bottom panel Maximum load for wood top Maximum total load 15 lbs. / 6.8 kg 100 lbs. / 45.4 kg 100 lbs. / 45.4 kg 100 lbs. / 45.4 kg 330 lbs. / 150 kg Safety Goggles (not included) Gloves (not included) CC BB Wing Screw 04 Keys 02 Adjustable Foot 04 B C A CC Cabinet Case Cabinet Top Cabinet Shelf CC Adjustable Foot Quantity Remarks 01 Pre-asembled 01 Assembly required 01 Assembly required 04 Assembly required 1 TAKE OUT ALL THE HARDWARE Lay the back of the cabinet down on even floor. Take the keys put in the bag together with the Instruction Manual to unlock and open the Cabinet doors. Take out the Hardware package from the inside of the folded cabinet. Close the doors and make sure it is locked securely. Lay the cabinet down on even floor Front Close and lock the door BB Take out Hardware boxes INSTALL THE ADJUSTABLE FEET Install the Adjustable feet to the bottom of the cabinet. BB A CC 3 TAKE OUT ALL THE HARDWARE CAUTION: Use at least two adult to move, assemble or install this product. Failure to do so can result in personal injury or product damaged. CAUTION: Do not put your hands on the folding point to avoid personal injury. Lift the cabinet upwards. Be careful as the cabinet can be slipped or fallen down which may cause serious injury or product damaged. Unfold the cabinet case. Do not touch on the conjunction parts while folding to avoid getting injured. 4 SETTLE THE BOTTOM PANEL Push the side panels till they get flattern. Make sure you adjust the Levelers evenly with the floor. Unlock the security pin of the Bottom panel. Flip down and fix the bottom panel firmly on the base frame of the cabinet. Close <-->Open Lift the Cabinet Upwards Unlock the safety pin Unfold the Cabinet case totally Flip down the bottom panel Fix the bottom panel firmly 6 5 INSTALL THE DECK Insert the two lower pins on the inner back side of side panels at desired height. Make sure the 2 pins are secured firmly. Flip the deck foreward and make sure the 4 pins of the deck are at the same height. Lock the 2 front pins under the deck and make sure that the pins are secured firmly. 6 INSTALL THE CABINET TOP Place the wooden surface on top of the cabinet. Make sure to match the position. Tighten the 4 screws on the inside of the cabinet, just below the top of the cabinet. Front Front Close <-->Open Lock 2 lower pins firmly Clip front side of cabinet top Pull back side donwards Insert 4 Wing Screws Close <-->Open Flip down the deck Level the deck and secure the pins firmly. 7 Maintenance Check all the screws and nuts periodically for tightness. Tighten them when necessary. Check the safety strap periodically for tightness. Tighten it when necessary. Care and Cleaning Periodically clean the surfaces with soft rag and water. Grease and oil can be removed with most standard cleaning fluits. For safety, use a nonflamable cleaning fluid. 8Adobe PDF library 15.00 Adobe Illustrator(R) 24.0