ONEX-GX330

Warranty

ONEX will repair or replace, at no charge, any product(s) or part(s) of a product that proves defective because of improper material or workmanship, under normal use and maintenance.

Covered by Limited Warranty

This Limited Warranty covers any defects in material or workmanship under normal use. This includes dysfunctional, deformed, broken, or damaged parts and leatherette decomposition.

Not Covered by Limited Warranty

Problems not resulting from material or workmanship defects, such as stains, scratches, and other similar problems. For such problems, please request a replacement product within 7 days of purchase. Damage or defect resulting from faulty assembly is also not covered.

How to Make a Warranty Claim

If your product is still under warranty and you would like to apply for a replacement, please return the product at your point of purchase or contact your local agent. Please prepare the following information before contacting the point of purchase or local agent:

1. Invoice/receipt.
2. Photo of serial number starting with SN (can be found underneath product).
3. Photos or video of product illustrating the problem/issue.
4. Photo of complete product.

Warranty Period

The warranty is effective from the date on which the invoice/receipt was issued. If an invoice/receipt cannot be provided, the warranty is valid from the date of packaging (plus one month).

Warranty Notes

The images below illustrate correct and incorrect usage for warranty purposes:

• Correct posture: A person sitting upright with back support. [✓]
• Incorrect posture: A person slouching forward. [✗]
• Incorrect posture: A person leaning back too far. [✗]
• Incorrect posture: A person with legs crossed improperly. [✗]

Parts

The following parts are included with the ONEX-GX330:

• Seat Cushion
• Backrest
• Armrests (x2)
• Gas Lift Cylinder
• Base with Wheels (x5)
• Mechanism/Tilt Control Unit
• Hardware Pack:
• Bolts (x4)
• Bolts (x4)
• Washers (x4)
• Bolts (x4)
• Washers (x2)

How to assemble

Follow these steps to assemble your ONEX-GX330 gaming chair:

1. Attach the backrest to the seat cushion using the provided bolts and washers. Ensure the connection is secure.
2. Attach the armrests to the sides of the seat cushion and backrest, using the appropriate bolts and washers.
3. Mount the gas lift cylinder into the base with wheels.
4. Place the assembled seat and backrest unit onto the gas lift cylinder.
5. Attach the mechanism/tilt control unit to the underside of the seat cushion.
6. Ensure all bolts are tightened securely.

For detailed visual guidance, please refer to the diagrams provided in the original manual.

Visit www.onexzone.com.au for more information.