Braun BC15 Projection Clock
Quick Set-up Guide
Option A: Battery Operated
- Remove the battery door.
- Insert 3 x AA size new batteries as indicated in the battery compartment, and press the 'reset' key to reset the clock. The display will turn on after a few seconds.
- Close the battery door.
Only use new alkaline batteries from a reputable brand.
Option B: Adaptor Operated
- Plug the adaptor into the DC jack at the back of the clock, and press the 'reset' key to reset the clock. The display will turn on after a few seconds.
Setting the Time
- Slide the TIME SETTING / NEUTRAL / ALARM SETTING switch to the TIME SETTING position.
- Press the '+' or '-' key to set the desired value.
- Slide the TIME SETTING / NEUTRAL / ALARM SETTING switch to the NEUTRAL position to return the normal display and save the settings.
Setting the Alarm
- Slide the TIME SETTING / NEUTRAL / ALARM SETTING switch to the ALARM SETTING position.
- Press the '+' or '-' key to set the desired value.
- Slide the TIME SETTING / NEUTRAL / ALARM SETTING switch to the NEUTRAL position to return the normal display and save the settings.
Using the Alarm and Snooze Function
- Enable the alarm by shifting the ALARM ON / OFF slider up (so the green detail is visible). The bell icon ? will appear on the LCD display.
- Tap the SNOOZE / LIGHT touch button to stop the alarm and activate the snooze function. When the snooze function is activated, the bell icon ? will flash.
- To disable the alarm and snooze function, shift the ALARM ON / OFF slider down. The bell icon ? will disappear.
For detailed information, refer to the full user manual available at www.braun-clocks.com/pages/warranty or scan the provided QR code.
For assistance, contact your local Braun service center or visit:
Certain trademarks used under license from The Procter & Gamble Company or its affiliates.








