ASKO BI540 Integrated Cooler Mounting Instructions

Step A: Door Preparation and Attachment

A1: The appliance door is shown open, revealing internal shelves. A separate table with installation items is placed nearby.

A2: A close-up view of the door hinge mechanism. A rail is attached to the appliance body, and the door is depicted sliding onto it. A component labeled 'V' is visible.

A3: The door is attached to the appliance body via a hinge mechanism. A warning symbol ⚠️ is displayed. Screws are inserted into the hinge with approximately 5 mm clearance.

A4: The appliance door is now attached and closed, with the hinge mechanism clearly visible.

Steps 5-8: Door Detachment and Reattachment

Step 5: The door is shown open. A mechanism for detaching the door is illustrated, accompanied by a trash can icon ?️ next to a hand holding a screw, indicating the removal process.

Step 6: The door is detached. Diagrams 6.1 through 6.4 detail the process of removing and attaching hinge components, screws, and rotating parts.

Step 7: The appliance body is shown. Diagram 7.1 illustrates attaching a bracket to the top of the appliance. Diagram 7.2 shows a close-up of a hinge adjustment with approximately 5 mm clearance.

Step 8: The appliance door is reattached to the appliance body.

Steps 9-10: Sliding Mechanism Installation

Step 9: Diagram 9.1 shows attaching a sliding mechanism to the door using 2x screws. Diagram 9.2 illustrates attaching another part of the sliding mechanism to the appliance body with 4x screws.

Step 10: The door is shown being attached to the appliance body. Component 'V' is placed on a table. Diagram 10.1 shows the door sliding into its final position.

Section B: Assembly Options

Two options, labeled 'a' and 'b', are presented with question marks. These options likely represent different installation configurations or door handing preferences.

Option a: Depicts the attachment of sliding rails (J 1x, L 1x, P 2x) to the appliance. Sub-steps a.1 through a.4 provide detailed actions, including inserting screws, rotating a locking mechanism, and pressing a button.

Option b: Shows the attachment of sliding rails (K 1x, L 1x) to the appliance. Sub-steps b.1 through b.4 detail actions such as inserting screws, rotating a locking mechanism, and pressing a button.

Section C: Further Installation Steps

Step C1: The appliance door is open. Brackets labeled 'C' (4x) and 'H' (4x) are attached to the appliance body. Sliding rails '1.1' and '1.2' are shown.

Step C2: The appliance body is shown. A mounting plate labeled 'U' (1x) is attached. Sub-steps 2.1 through 2.3 illustrate the process of attaching the door to the appliance body, noting a 0 mm clearance and a measurement of approximately 120 mm.

Steps 3-4: Clearance Checks and Bracket Attachment

Step 3: Diagrams illustrate required clearance based on dimensions 'A' and 'y'. Symbols 'D' and 'E' are shown with checkmarks ✔️ and a trash can icon ?️, likely indicating correct placement or disposal of excess material.

Step 4: The appliance door is shown. Diagrams 4.1 through 4.5 illustrate the attachment of mounting brackets and sliding mechanisms to the door and appliance body, using screws and specific clearances.

Steps 5-7: Sliding Mechanism and Hinge Attachment

Step 5: Diagrams 5.1 through 5.4 show the attachment of sliding mechanisms to the appliance door and body, using screws and measurements of 42.0 mm.

Step 6: Diagrams 6.1 and 6.2 show the attachment of the door to the appliance body using hinges, with screws and measurements of 0 mm and 42.0 mm.

Step 7: Diagrams illustrate the attachment of bracket 'G' (2x) to the appliance body, with measurements specified as 18

Steps 8-10: Bracket and Sliding Mechanism Finalization

Step 8: Diagrams 8.1 and 8.2 show the attachment of bracket 'G' (2x) to the appliance body.

Step 9: Diagrams 9.1 and 9.2 show the attachment of bracket 'G' (2x) to the appliance body with specific measurements: z=16 mm and 18

Step 10: Diagrams 10.1 through 10.3 show the attachment of a sliding mechanism to the appliance door, using screws and maintaining a 0 mm clearance.

Steps 11-12: Door Panel Attachment and Disposal

Step 11: Diagrams 11.1 through 11.4 show the attachment of the appliance door to the appliance body, using screws and maintaining a 0 mm clearance.

Step 12: Diagrams 12.1 through 12.3 illustrate the attachment of the door panel to the appliance, using screws and a warning symbol ⚠️. Packaging is shown being disposed of in a trash can ?️.

Steps 13-16: Shelf and Door Adjustments

Step 13: Diagrams display two configurations of shelves and a person figure, with arrows indicating placement. Brackets labeled 'R' (1x) are shown.

Step 14: Diagrams 14.1 through 14.4 show the attachment of the door to the appliance body, using screws and specific clearances.

Step 15: A diagram illustrates the attachment of a sliding mechanism to the door, using screws and a circular arrow symbol ?.

Step 16: Diagrams 16.1 and 16.2 show the attachment of the door to the appliance body, using screws.

Steps 17-20: Final Door Attachments

Step 17: Diagrams 17.1 and 17.2 show the attachment of the door to the appliance body, using screws and a wrench ?.

Step 18: Diagrams 18.1 and 18.2 show the attachment of bracket 'B' (8x) to the appliance body with screws.

Step 19: Diagrams 19.1 and 19.2 show the attachment of bracket 'I' (4x) to the appliance door.

Step 20: Diagrams 20.1 and 20.2 show the attachment of component 'M' (1x) to the appliance door.

Step 21 & Final Checks

Step 21: The appliance door is shown open, revealing internal shelves. A separate table with installation items is placed nearby.

Step 1 (Right Side): The appliance is shown. Bracket 'N' (1x) is attached. An arrow indicates placement. Component 'E' is depicted.

Diagram E: Illustrates the appliance door being attached. Arrows indicate alignment. A power plug is shown being inserted into a socket.

Warning Symbol ⚠️: A person is shown looking at a table with a clock ⏰, then discarding something into a trash can ?️. This may indicate a final check or proper disposal of packaging.