FPG Inline 3000 Series 1500 Freestanding/Square Heated Display Case
Product Overview and Specifications
Product Overview
The FPG Inline 3000 Series 1500 is a freestanding, square, heated display case designed for commercial use. It offers high energy efficiency and optimal temperature control for showcasing food products.
Key Features:
- High energy efficiency: 1.3 kWh per hour (average).
- Cabinet operating temperature range: +30°C to +90°C.
- Recommended core product temperature: +65°C to +80°C.
- Smart display with double-glazed, toughened safety glass and a black trim.
- Available with Fixed Front or Sliding Doors.
- Internal LED lighting system (25,000 hours lifespan) providing 2758 lumens per metre.
- Adjustable stainless steel wire rack shelves.
- Shelf-mounted ticket strips (30mm).
- Constructed from stainless and mild steel for durability and climate control.
- Low wattage density heating element for even temperature distribution.
- Fitted with adjustable legs for leveling.
? Indicates sustainability benefits.
Certifications: ASNZ, FOOD, CE, IEC.
Specifications
| Attribute | Details |
|---|---|
| Range | INLINE 3000 SERIES |
| Model Type | HEATED |
| Model Numbers | IN-3H15-SQ-FF-FS (Fixed Front), IN-3H15-SQ-SD-FS (Sliding Doors) |
| Front Configuration | SQUARE / FIXED FRONT or SQUARE / SLIDING DOORS |
| Installation | FREESTANDING |
| Height | 1272mm |
| Width | 1500mm |
| Depth | 662mm |
| Temperature Range | +30°C to +90°C |
| Recommended Core Product Temperature | +65°C to +80°C |
| Environmental Test Conditions | 22°C / 65% RH |
| Heating Type | Low wattage density element |
Electrical Data
| Model | Voltage | Phase | Current | E24H (kWh) | kWh per hour (average) | IP Rating | Mains Connection | Connection Plug | LED Lighting Hours | LED Lumens | LED Colour |
|---|---|---|---|---|---|---|---|---|---|---|---|
| IN-3H15-SQ-XX-FS | 220-240 V | Single | 7.6 A | 31.2 | 1.3 | IP 20 | 3 metre, 3 core cable | 10 amp, 3 pin plug 1 | 25,000 | 2758 per metre | Natural |
1 Please advise country to change plug specification.
Capacity, Access & Construction
| Model | Display Area | Levels | Access Front | Access Rear | Chassis Construction |
|---|---|---|---|---|---|
| IN-3H15-SQ-FF-FS | 0.85 m² | 2 Shelves | Fixed front | Sliding doors | Stainless 304 and mild steel |
| IN-3H15-SQ-SD-FS | 0.85 m² | 2 Shelves | Sliding doors | Sliding doors | Stainless 304 and mild steel |
Dimensions (Uncrated)
| Model | Height (H) | Width (W) | Depth (D) | Mass (Uncrated) |
|---|---|---|---|---|
| IN-3H15-SQ-XX-FS | 1272mm | 1500mm | 662mm | - kg |
Crated weights and dimensions vary. Please contact FPG for shipment information.
Installation Notes & Diagrams
Model cutout dimensions for IN-3H15-SQ-XX-FS models require a 1580mm x 668mm benchtop cutout. The joinery height required is 652mm. Refer to the product manual for detailed installation guidance.
Diagrammatic Representation of Dimensions:
- Plan View: Shows an overall appliance width of 1500mm, with a shelf width of 1430mm. The required benchtop cutout width is 1508mm.
- Front Elevation: Shows an overall appliance height of 1272mm and a depth of 662mm. The required benchtop cutout depth is 668mm.
- Section View: Illustrates internal shelving and the joinery height of 652mm.
- Rear Elevation: Indicates the cable exit base and a cable length of 3 meters.
Options & Accessories
Contact a FPG Sales Representative for a full range of options, including:
- Shelf trays: Available in toughened safety glass or mild steel. Colour and woodprint options are available for steel shelf trays.
- Stainless steel product trays with three sides.
- Stainless steel pie chutes.
- Additional shelves.
- Ticket strip to base (30mm).
- 25,000 hour LED lighting for shelves.
- Branded decals.
- Rear door or end glass mirror application.
- Adjustable 100mm legs (+25mm adjustment), lockable castors, or unidirectional rollers.
- Forward facing controls.
- Rear deck assemblies.
- Custom joinery solutions.
Contact & Further Information
For more information, technical data, and installation guidelines, please refer to the Product Manual available on the FPG website.
Future Products Group Ltd is committed to continuous development and improvement. Specifications and designs are subject to change without notice.
For inquiries or questions, please email: sales@fpgworld.com or visit www.fpgworld.com for full contact details for your region.
Company: Future Products Group Limited








