Smartwatch User Manual
Thank you for choosing our smartwatch. You can read this manual to fully understand the operation and use of the device. The company reserves the right to modify the content of this manual without prior notice.
Package: A gift box, a user manual, a smart band unit.
This product is water-resistant (IP68) and can be used for washing hands, swimming, etc. It should not be worn in hot showers or saunas to avoid steam. If the water is not used according to instructions, the company will not provide a free warranty.
Button Instructions
Power Button: Long press the switch to turn on/off. Briefly press the screen to illuminate the display.
Replaceable Band: A small switch, push in the middle to change the band.
Image: A smartwatch with a round display showing time and date, and a black strap.
Touch Instructions
Tap to enter and swipe right to go back. Swipe down from the home screen to enter the status bar. Swipe right to enter the notification center. Swipe right again to enter the main menu. Swipe up to enter the weather status.
Charging Instructions
This product uses magnetic force charging. It supports 5V mobile phone chargers and computer USB interfaces. Connect the charging point to the back of the device's charging pins; it will charge automatically. It generally takes 2 hours for a full charge. Standby time is up to 30 days, and working time is 5-10 days. Do not use the watch while charging.
Caution: Do not allow the 2 pins of the magnetic charging cable to connect with conductive material simultaneously, as this may cause a short circuit.
Connecting the Watch to Your Phone
First, download and install the 'WearFit 2.0' app on your mobile phone. There are two ways:
- For iOS and Android users: Scan the QR code below using your browser or any scanner to download WearFit 2.0. (QR code excluded as per instructions)
- For Android phones: Search and download the 'WearFit 2.0' app from Google Play. For iOS phones: Search and download the 'HPlusFit' app from the App Store.
After installation, turn on your phone's Bluetooth and the 'WearFit 2.0' app. Confirm that notifications and all other requested permissions for 'WearFit 2.0' are enabled. Pair the band, search for the device 'S20' (some phone brands require GPS to be enabled on the smartphone before pairing), and tap to connect.
Firmware Update
When connected via Bluetooth, in 'WearFit 2.0', tap 'Mine' > 'Device Management' > 'Firmware Update'. If a new firmware is available, tap to update to the latest version.
Note: If the update fails, wait for the watch battery to drain, then charge it, restart the watch, search for the 'Huntersun-BLE' Bluetooth device, and try updating again.
Due to differences in Bluetooth protocols across phone brands, Bluetooth connection may sometimes be unstable between the mobile phone and the smartwatch. Please restart Bluetooth and try connecting again.
Main Function Introduction
- Language/Time/Date: Synchronizes phone date and time when connected via Bluetooth to the app.
- Standby Watch Face: Two watch faces are available. Press and hold the home screen for 2 seconds to change.
- Status Bar: Swipe down to enter the standby interface showing Bluetooth status, QR code (scan with mobile phone to download 'WearFit 2.0'), brightness adjustment, and battery status.
- Notifications: Swipe right on a notification. Synchronized notifications from your phone, such as calls, WhatsApp, SMS, and WeChat messages, are displayed. Up to 8 recent alerts can be shown. The watch vibrates to remind you of incoming calls and messages, and supports rejecting calls.
- Pedometer, Distance, Calories: Tracks daily steps, mileage, and calories burned. Resets to 0 at midnight each day. Supports 7 days of data records on the watch.
- Sports: Multi-sport mode. Select a sport to start. Swipe right to pause exercise. Records duration, calorie consumption, and heart rate data, etc.
Health Care
- Heart Rate: When activated, heart rate is measured by the device scanning the capillary surface of the skin with green optical diodes. Please wait about 2 seconds for measurement and recording to begin. Swipe to other menus to stop measurement. Please consult online information regarding average heart rate and exercise heart rate for your age group and sex, or ask your doctor for advice.
- Blood Pressure: Please place your hands on a surface and remain still. When this function is activated, it requires approximately 45-50 seconds for measurement and reading to provide a result.
- ECG: The device combines an optical heart rate sensor and an ECG sensor to display information about the user's heart function for reference. When activated, it requires approximately 30 seconds for measurement and reading to provide a result. Please note that the device is not a medical apparatus. The displayed values are for reference only.
- Blood Oxygen: Blood oxygen level (SpO2H) is the amount of oxygen circulating in the blood. Consult online information regarding healthy or abnormal blood oxygen percentages for your age group and sex, or ask your doctor for advice. Note: The device is not a medical device. The displayed values are for reference only.
- Sleep Monitor: Sleep monitoring will automatically activate from 10:00 PM to 8:00 AM the following morning. You can check sleep quality details with the WearFit2.0 app on your phone.
Other Functions
- Stopwatch: Tap to start and pause, tap again to stop.
- Music Remote Control: Play music on your phone and control it from the watch.
- Remote Camera: In WearFit 2.0, tap '+' to activate the camera function, shake the watch to take a photo.
- About: Tap to enter and check the device model, firmware version, and Bluetooth address.
- Reset: Restores the device.
- Alarms: Set multiple alarm clocks via the app on your phone.
- Sedentary Reminder: You can set a time to remind yourself to get up.
- Raise to Wake: Configure in the app. Consumes more power when enabled.
- Unit Settings: Metric or Imperial system.
Additional Features
- Find Phone: Tap to make your phone emit an alert tone.
- Data Transmission: All data is saved on the device. Pedometer, heart rate, sleep quality, and multi-sport mode data can all be transmitted to the app on your phone.
Warranty
1. If quality issues arise due to manufacturing, materials, or design within one year (from the date of purchase), we offer a free warranty for the main component. 2. We offer a free warranty for the battery and adapter within 6 months. This is conditional on normal and correct usage.
2. For failures caused by user-related reasons, we do not offer a free warranty, as indicated below:
- Disassembling or reassembling the product.
- Damage caused by dropping.
- All artificial damage or misuse (e.g., water ingress, external force damage, scratches on peripheral components, etc.) are outside the scope of the warranty.
3. When requesting a free warranty, you must provide a warranty card with the stamp from the place of purchase and the date of purchase.
4. If you encounter issues during use, please contact the customer service of the store where you purchased the product.
5. Please ensure final products meet the standard.
| Date of Purchase | Customer Signature: |
|---|---|
| IMEI Code | Seller Signature: |
| Store of Purchase | Store Stamp |
