TREBLAB C7 Wireless Headphones

Thank you for choosing the TREBLAB C7!

Our headphones provide superior sound quality and mobility thanks to their light-weight construction and convenient hands-free wireless operation. Before using this product, please read this manual.

WHAT'S IN THE BOX

• 1. TREBLAB C7 headphones
• 2. TREBLAB logo sticker
• 3. User's manual & quick start guide
• 4. Charging cable

BUTTONS AND PARTS

PHONE button: Controls calls, playback, and voice assistant.

MIC: Microphone for calls.

CHARGING PORT: USB Type-C port for charging.

VOLUME + button: Increases volume and skips to the next track.

VOLUME - button: Decreases volume and skips to the previous track.

STATE INDICATOR: LED light indicating device status.

OPERATIONS

SETTING UP YOUR TREBLAB C7

To turn on the headphones

Press and hold the PHONE button for 2 seconds. You will hear two sound prompts, and the blue state indicator will light up. A few seconds later, the state indicator will start flashing blue/red, indicating that the headphones are on and ready to pair.

To turn off the headphones

Press and hold the PHONE button for 3 seconds. You will hear a sound prompt, the red state indicator will light up, and then turn off.

PAIRING

Make sure that the TREBLAB C7 headphones are charged.

1. Press and hold the PHONE button for 2 seconds. You will hear two sound prompts, the blue state indicator will light up, and a few seconds later, the state indicator will start flashing blue/red.
2. Activate the wireless communication function on your smart device, scan/search for TREBLAB C7, and click CONNECT.
3. If prompted by your device to connect, select Yes.
4. You will hear the sound prompt indicating that the headphones are connected. The state indicator will start flashing blue every 15 seconds.

When you turn the headphones on, they will try to reconnect with the recently connected device. If reconnection does not happen automatically, the headphones will try to find the next device in the pairing list. You can only connect and play audio from one device at a time. You can save up to 6 connected devices.

GAMING MODE

TREBLAB C7 headphones support gaming mode to reduce audio latency up to 100ms, allowing for better video/audio synchronization and an improved gaming and video-watching experience.

1. To enable gaming mode, press the PHONE button four times. You will hear an ascending sound prompt and feel the lower latency while gaming/watching videos.
2. To disable gaming mode, press the PHONE button four times again. You will hear a descending sound prompt, and the latency will return to the standard 200ms.

NOTE: In gaming mode, the connection range is shorter than in standard mode. If you experience connection issues or drops, please disable gaming mode.

AUDIO PLAYBACK

• To pause and resume playback, press the PHONE button once.
• To change tracks, press and hold the VOLUME + button for 1 second for the next track, and press and hold the VOLUME - button for 1 second for the previous track.
• To adjust the volume, press the VOLUME + button once to increase volume and press the VOLUME - button once to decrease volume.

PHONE CALLS MANAGEMENT

The TREBLAB C7 were specifically designed for phone/conference calls. Audio playback will be paused during calls.

VOICE ASSISTANTS SUPPORT

TREBLAB C7 headphones are compatible with most voice assistants. To use a voice assistant, press the PHONE button three times.

CHARGING

When the headphones' battery is running low, you will hear a busy tone sound prompt.

To charge the C7 headphones, plug the supplied cable into the Type-C charging port on the ear-cup and the other end of the charging cord into a standard USB port. The state indicator will turn red.

It takes up to 2.5 hours to charge TREBLAB C7. When the headphones are charged, the red light will turn blue.

RESET TO THE FACTORY SETTINGS

You can reset the C7 headphones to factory default settings by cleaning up the pairing list with the last 6 connected C7 devices.

Make sure the headphones are disconnected from the source device. Simultaneously press and hold the VOLUME + and VOLUME - buttons for 3 seconds. You will hear a sound prompt, and the headphones will go to pairing mode.

TROUBLESHOOTING

SAFETY RULES

• Never disassemble or modify your C7 for any reason. Doing so may cause the device to malfunction or become combustible. Damage to your device can void your manufacturer's warranty.
• Do not charge the headphones when they are wet. Make sure to dry them off before charging.
• Avoid exposing the TREBLAB C7 to extreme temperatures (below 37°F / 3°C or above 112°F / 45°C). Extreme temperatures can deform the components inside the C7, reducing battery life and lifespan.
• Avoid putting the device's LED lights close to the eyes of children or animals.
• Do not use your C7 during a thunderstorm. Thunderstorms could cause serious malfunction and increase the risk of electric shock.

FCC STATEMENTS

FCC Compliance Statement - Part 15

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

FCC Interference Statement - Part 15

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Information

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

BATTERY INFORMATION

• Your device is powered by a rechargeable battery.
• Unplug the headphones from the power source when fully charged.
• If left unused, a fully charged battery will lose its charge over time.
• We recommend that you fully charge your headphones twice a month to ensure the battery's integrity.
• Please do not leave the headphones in hot or cold places, such as inside a closed car in the summer or winter, as this will reduce the capacity and life of the battery.
• Do not expose the battery to fire as it may explode.
• Battery may also explode if damaged.

RECYCLING

Your damaged or broken earphones can be recycled. We encourage you to do so to keep our planet clean. Where can you go to do this?

In the US, there are a couple of options:

• https://www.call2recycle.org
• https://search.earth911.com
• https://recyclenation.com/find
• https://www.cta.tech/Consumer-Resources/Greener-Gadgets

In Canada, please visit the links below:

• https://thinkreuse.net
• https://www.call2recycle.ca

In the UK, please visit the links below:

• https://www.recycle-more.co.uk/
• https://www.recyclenow.com/local-recycling

SPECIFICATIONS

• Speaker unit: Ø30mm, 32Ω
• Charging port: USB Type-C
• Dimensions: 168 x 154 x 68 mm / 6.61 x 6.06 x 2.67 in
• Weight: 87 g / 0.19 lb / 3.04 oz

THANK YOU

TREBLAB appreciates your choice of TREBLAB as your trusted brand of wireless earphones. We hope you enjoy the great sound and seamless usability the TREBLAB C7 provides.

We are committed to making our customers happy by providing true value with our products. If for any reason you are not completely satisfied with your purchase or have any questions, please let us know by contacting us at http://treblab.com/contact_us.

We care about our customers above all and are always here to serve you.

WARRANTY

1 YEAR WARRANTY

Parts and Labor Warranty.

Please visit www.treblab.com to register YOUR product.

Designed by Productech in the U.S.

WARNING: This product can expose you to Bisphenol A, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov