Makita® 18V Drill Driver Brushless LXT DDF490
65 Nm, 0 - 1 900 min⁻¹
Model DDF490 is a Drill Driver powered by an 18V LXT Li-ion battery.
This model ensures sufficient torque by adopting a Brushless Motor. It is lightweight and compact, easy to handle even in narrow spaces. Features and Benefits:
- Max. torque of 65Nm
- Mechanical 2 speed
- Electric brake
- Variable speed control by trigger
Technical Specifications
| Nominal Battery Voltage | 18 V |
| Voltage LXT | ✔️ |
| Battery Chemistry (Ni-Cd / Ni-MH / Li-ion) | Li-ion |
| Brushless Motor | ✔️ |
| No load speed | 0 - 500 / 0 - 1900 min⁻¹ |
| Max. fastening torque Hard/Soft | 50 / 27 Nm |
| Max Torque | 65 Nm |
| Torque setting | 20 |
| Max. Drilling Diameter in Wood | 38 mm |
| Max. Drilling Diameter in Steel | 13 mm |
| Driving Shank | 1/2"-20UNF |
| Drill Chuck Capacity | 1,5 - 13 mm |
| Drilling Capacity Wood (Self-feed bit) | 38 mm |
| Vibration Level, Drilling into metal | ≤ 2,5 m/s² |
| Vibration Uncertainty (K Factor), Drilling into metal | 1,5 m/s² |
| Sound Pressure Level (LpA) | 78 dB(A) |
User Benefits
- Keyless chuck for easy bit installation and removal
- eXtreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh conditions
- Reversing switch is conveniently located
- Electric brake for maximum productivity and increased operator safety
- Built-in LED light with pre-glow and afterglow functions illuminates the work area
- Battery protection system automatically shuts off power when the battery level is low
