BOIFUN Digital Baby Monitor

To Your New Digital Baby Monitor

Thank you for purchasing the BOIFUN Digital Baby Monitor. This device allows you to see and hear your baby sleeping in another room or monitor older children in their playroom.

This User's Guide provides comprehensive information to help you get the most from your product. Before using the baby monitor, it is recommended to insert and fully charge the battery in the parent unit. This ensures continuous operation even if disconnected from the mains power. Please read the Safety Instructions on page 6 before installing the units.

Get Everything?

• 1 x Parent Unit
• 1 x Baby Unit
• 2 x Power adapter

Overview Of Your Parent Unit

The parent unit features the following components:

• 1. Power Key [power-symbol]
• 2. Power Adapter Connector [plug-symbol]
• 3. LCD display
• 4. Microphone [microphone-symbol]
• 5. Charging Indicating LED [charging-symbol]
• 6. Power/Signal Indicating LED [power-signal-symbol]
• 7. VOX Key [VOX-symbol]
• 8. Music Play On/Off Key [music-symbol]
• 9. PTT Key [PTT-symbol]
• 10. Speaker [speaker-symbol]
• 11. OK/Menu Key [OK-symbol]
• 12. Return Key [return-symbol]
• 13. Volume+ /Up [volume-up-symbol]
• 14. Volume- /Down [volume-down-symbol]

Overview Of Your Baby Unit

The baby unit includes the following features:

• 1. Light Sensor [light-sensor-symbol]
• 2. Camera Lens [camera-lens-symbol]
• 3. Power Indicating LED [power-led-symbol]
• 4. Microphone [microphone-symbol]
• 5. Infrared LED [infrared-symbol]
• 6. Power Key [power-symbol]
• 7. Power Adapter Connector [plug-symbol]
• 8. Temperature Sensor [temperature-sensor-symbol]
• 9. Pair key [pair-key-symbol]
• 10. Speaker [speaker-symbol]

Table Of Contents

1. Safety Instructions
2. Getting Started
   • Baby Unit Power Supply
   • Parent Unit Power Supply
3. Using The Baby Monitor
   • Setting Up
   • Pairing Camera
   • Vox Function
   • Music Player
   • Talk Function
   • Adjusting The Volume
4. Monitoring Screen Icons
5. Menu Options
   • Main Menu
   • Camera Registration
   • Alarm
   • Settings
   • Vox
   • Languages
   • System Info
6. Technical Features

1. Safety Instructions

WARNING

This baby monitor complies with all relevant standards regarding electromagnetic fields and is safe to use when handled as described in the User's Guide. Always read the instructions in this User's Guide carefully before using the device.

• Adult assembly is required. Keep small parts away from children when assembling.
• This product is not a toy. Do not allow children to play with it.
• This baby monitor is not a substitute for responsible adult supervision.
• Do not place the baby unit or cables in the cot or within arm's reach of the baby (at least 1 meter away).
• Keep the cords out of reach of children.
• Do not use the baby monitor near water or a heat source.
• Only use the power adapters provided.
• Do not touch the plug contacts with sharp or metal objects.

2. Getting Started

2.1 Baby unit power supply

1. Connect the small plug of the power adapter to the baby unit and the other end to the mains socket.

NOTE: Only use the power adapter provided.

2. The baby unit will work with the blue light on.

3. The camera/baby unit only works when it is connected to the power supply.

2.2 Parent unit power supply

Charging the parent unit fully before use is recommended. This will allow the unit to operate on battery in the event of a power failure.

1. Connect the plug of the power adapter to the parent unit and the other end to the mains socket.

NOTE: Only use the power adapter provided.

2. The charging LED will illuminate, indicating the start of charging the battery.

3. Push the power key to the ON side to turn on the parent unit.

3. Using The Baby Monitor

3.1 Setting up

Place the baby unit in a convenient location (e.g., on a table) and point the camera lens towards the area you want to monitor. Adjust the baby unit until you are satisfied with the image in the parent unit.

NOTE: Do not place the baby unit within the baby's reach! If there is interference on the picture or sound, try moving the units to different locations and ensure they are not close to other electrical equipment.

3.2 Pairing camera

The enclosed baby unit has already been registered. You do not need to register it again unless the baby unit loses its link with the parent unit. Refer to section "5.2 Camera Registration" for more details.

3.3 VOX Function

Pressing the VOX key will turn on VOX mode. The VOX mode automatically puts the display in sleep mode to save battery. It reactivates automatically when it detects noise in the baby's room.

3.4 Music player

Pressing the music key will turn on the music player and play a lullaby through the baby unit. Press the music key again to turn it off.

3.5 Talk function

Press and hold the PTT key on the parent unit to talk to your baby through the baby unit loudspeaker. A symbol will be displayed at the bottom of the screen.

3.6 Adjusting the volume

When the video is playing, press the Volume- key to decrease volume or the Volume+ key to increase volume. The display will show the current volume for 3 seconds.

4. Monitoring Screen Icons

The monitoring screen displays the following icons:

• 1. Signal Strength indicator [signal-strength-symbol]
• 2. Temperature of the baby's room [temperature-symbol]
• 3. Lullaby is playing [music-note-symbol]
• 4. Vox function activated [VOX-symbol]
• 5. Alarm activated [alarm-symbol]
• 6. Battery indicator [battery-symbol]
• 7. PTT function activated [PTT-symbol]
• 8. Date and time (HH: MM AM/PM DD/MM) [clock-symbol]

5. Menu Options

5.1 Main menu

Pressing the "OK/Menu" key on the monitoring screen will enter the main menu, which contains 6 items:

1. Camera
2. Alarm
3. Settings
4. VOX
5. Languages
6. System info

You can press the "Up" key or "Down" key to move the cursor to select an item, and press the "Menu" key to enter the selected sub-menu. Pressing the "Return" key will take you back to the monitoring screen.

5.2 Camera Registration

Press the "OK/Menu" key to enter the registering screen, then push the pair key on the back of the baby unit within 10 seconds.

The screen will show "Re-Register Camera?" with "Yes" and "No" options. After successful registration, it will display "Register Successful!".

5.3 Alarm

Press the "PTT" key to move the cursor and the "Up/Down" keys to change the value.

The alarm settings allow you to set alarm times, repeat options, and "Once" or "Repeat" modes.

5.4 Settings

5.4.1 Time and date

The menu includes two items: Set time/date and Set format.

You can set the time, date, date separator, and choose between 12-hour or 24-hour format. Options for Daylight saving are also available.

Press the "PTT" key to move the cursor and the "Up/Down" keys to change the value.

5.4.2 Temperature unit

Switch the unit to Celsius or Fahrenheit.

5.4.3 Anti-flicker

Adjust the frequency of 50/60 Hz to suit your lighting for anti-flicker.

5.4.4 LCD backlight

Adjust the brightness of the LCD and the LCD backlight active time in menu operation.

5.5 VOX

5.5.1 System mode

This menu allows you to choose the working mode: Normal mode/VOX mode.

5.5.2 VOX Sensitivity

Switch the VOX sensitivity between Low/Medium/High levels.

5.6 Language

The language setting menu allows you to choose your language from the following options:

• English
• French (Francais)
• Spanish (Espanol)
• Portuguese (Portugues)
• Italian (Italiano)
• German (Deutsch)
• Turkey (Turkce)
• Russian

5.7 System info

System information includes Project ID, Hardware version, software version, build date, etc.

6. Technical Features

Frequency: 2.4GHz Digital

Modulation Mode: GFSK

Operating Temperature: -10 to +45 °C

Operating Humidity: <85%

Range: 260m in open field

Monitor

• LCD: 3.2" TFT LCD
• Resolution: 320x240@20fps
• Battery: Li-Polymer 750mAh
• Dimensions (WxHxD): 120mm ×70mm ×17mm

Camera

• Sensor: 0.3 Mega pix CMOS
• Minimum illumination: 0Lux (IR on)
• Night Vision Distance: 15ft (5m)
• Lighting sensor [lighting-sensor-symbol]
• Temperature sensor [temperature-sensor-symbol]
• Dimensions (WxHxD): 67mm ×106mm ×67mm