Boifun Bell J1 Wireless Video Doorbell User Manual
After-sale support
Thank you for purchasing the BOIFUN smart video doorbell. A 24-month warranty is provided. For any problems or suggestions, please contact Boifun via Amazon message or email at admin@boifun.net. The best service will be offered.
Note:
- The smart video doorbell supports 2.4GHz Wi-Fi only; it does not support 5GHz Wi-Fi.
- Pay attention to the positive and negative poles of the battery when installing and removing it to prevent explosion.
- The battery model is 18650.
- Ensure the Wi-Fi signal strength is over 75%. If the doorbell is far from the signal source, it may not connect successfully on the first try.
- If your router is connected to too many devices, the doorbell may fail to connect to Wi-Fi due to IP address conflicts.
- This smart video doorbell does not support PC Browser and Software.
- This smart video doorbell supports event recording even when Wi-Fi is disconnected.
- Video playback works only in the BoifunCam APP; it does not support third-party players.
- Manually captured snapshots and recorded files are saved on the mobile device. Event snapshots are saved in the Cloud, and event recordings are saved on a Micro SD card.
- Watching live footage or recorded videos in the APP from the SD card will consume battery power.
What's in the box
Please consult the checklist below for all components:
| Video Doorbell | USB Cable | User Guide |
| Indoor Chime | Screw & Tools | Adhesive Tape |
Meet the doorbell
| Component | Description |
|---|---|
| 1 | Lens |
| 2 | PIR |
| 3 | Speakers |
| 4 | Doorbell button |
| 5 | LED indicator |
| 6 | Base switch |
| 7 | Built-in 18650 battery |
| 8 | Micro-SD card slot |
| 9 | Charging indicator |
| 10 | Charging Port |
| 11 | Reset button |
Meet the chime
| Component | Description |
|---|---|
| 1 | Indicador LED |
| 2 | Reset |
| 3 | Volume |
| 4 | Ringtone |
| 5 | Speaker |
Battery charging
The batteries inside the doorbell are not fully charged according to transportation safety regulations. Please charge the batteries using a USB-compatible wall charger (not included) and the provided USB cable for about 8-10 hours before installation.
Battery management:
Battery life depends on the activation frequency. Here are some settings to avoid unnecessary power loss:
- Set the recording time to 20-30 seconds, which is sufficient for daily needs.
- Lower the "Motion Detection" sensitivity or enable the "Human Motion Detection" function.
- If the doorbell faces the main road, adjust its angle to prevent unnecessary activation.
- Ensure Wi-Fi signal strength is over 75%. If it's lower than 75%, the doorbell may be continuously activated. Install the camera closer to the router or use a Wi-Fi extender to improve performance. If issues persist, email admin@boifun.net.
Download the app
Download and install the "BoifunCam" App from Google Play™ or the App Store™. The app is also available by scanning QR codes with your smartphone's QR code scanner.
Note: If your device does not support downloading the 'BoifunCam' app, search for and download the 'CloudEdge' software from the Google Play Store or Apple App Store.
Note: A small number of mobile phone models may not be compatible with BoifunCam. Boifun apologizes for any inconvenience. If you encounter this, please send your phone model via email to admin@boifun.net. Boifun is optimizing the software and has prepared backup software "CloudEdge" for download. Your understanding and kindness are greatly appreciated.
Wi-Fi set up
Tips for set up:
- Ensure the device is within 10 meters (30 feet) of your router.
- Verify your router is functioning and perform configuration near your Wi-Fi router.
- Keep the device away from devices that cause interference, such as microwaves, baby monitors, or other electronic devices.
- If you have separate network names for 2.4 GHz and 5 GHz bands, connect to the 2.4 GHz network.
- Avoid using special characters or symbols in your Wi-Fi name or password. If issues persist, email admin@boifun.net.
Guiding steps:
- Tap to add device.
- Select Doorbell.
- Check power status.
- Activate the doorbell.
- Reset device.
- Input Wi-Fi password.
- Prepare Code Scanning.
- Generate QR Code.
- Wait for connection.
- Adding device complete.
Run a test
After setup, tap the live view window in the App for a test. Then take your doorbell outside to the installation spot and run a test there. Ensure the installation spot has a strong 2.4 GHz Wi-Fi signal.
Note: If the video quality outdoors is not as good as indoors, you may need to move your router closer to the installation spot or use a Wi-Fi extender.
Live viewing
| Control | Function |
|---|---|
| 1 | Quit Live Viewing |
| 2 | Setting Menu |
| 3 | Battery Status |
| 4 | Wi-Fi Signal Status |
| 5 | Resolution Selection |
| 6 | Video Playback |
| 7 | Cloud Storage Service |
| 8 | Screenshot Button |
| 9 | Speak to the Visitor |
| 10 | Voice Changer (Original, Clown, Uncle) |
| 11 | Record on the Phone |
| 12 | Motion Detection On/Off |
| 13 | Siren |
| 14 | Photo Album |
Note: Live viewing does not trigger video recording.
Playback
If a Micro-SD card is installed, you can play back video clips captured after motion detection or visitor calls. Live viewing does not trigger device recording. You can also back up video clips to the cloud if you have activated the cloud storage service (7-Days-Free Trial available).
The interface shows options for searching video clips by date, playback interface, and cloud storage interface, including timeline zoom in/out functionality.
Leave voice messages
You can pre-record up to 3 voice messages (max. 10 seconds each) into the doorbell for quick responses to visitors when you are unavailable.
Steps: Setting --> Voice Message --> Press and hold the [microphone icon] to record voice messages --> Push doorbell button --> Play the selected voice message in reply to the doorbell call.
Share your device
Sharing by account searching
Steps: Settings >> Device Share >> Tap on "Add" >> Tap on "Account" >> Type in account ID >> Confirm Sharing.
Sharing by QR code scanning
New users can show their QR codes to the administrator for device sharing via QR code scanning.
Find your QR code: Run BoifunCam App >> Tap on "[User Name icon]" >> "My QR Code" >> Let the administrator scan your QR Code.
Note:
- Guide family members to download and install the BoifunCam App and register an account before device sharing.
- There is no limit to the number of users sharing one device.
- Only the administrator has access to the setting menu. Other users can only view live footage and playback.
- All users will receive doorbell calls and alarm notifications.
- Multiple users can access the doorbell simultaneously for live view or playback.
Connect the chime
- Power the chime: The chime is powered by 3 AAA 1.5V batteries.
- Click reset button: Click the RESET button on the wireless chime once. The LED indicator will flash red, indicating it is in pairing mode.
- Press the doorbell button: Press the doorbell button. The chime will sound to react. Pairing is successful when the indicator on the chime turns solid blue.
- Chime settings: Access the chime settings page via the app to mute the Chime Reminder, select ringtones, adjust chime volume, or unbind the connection with the doorbell.
Note:
- Your doorbell communicates with the chime via Radio Frequency, not Wi-Fi. Pairing can be done before doorbell configuration.
- You can add multiple chimes to one doorbell, and vice versa.
- Press and hold the RESET button on the chime for 5 seconds until the indicator flashes red 3 times to release the connection between the chime and its connected doorbell.
Installation
Select location
Your doorbell has a 166-degree view angle and a 120-degree human detection range. Mount your doorbell at least 5 feet (160 cm) above the ground for optimal viewing and motion detection performance.
Go wireless installation
- The doorbell can be removed by pressing the base switch at the bottom.
- Bracket installation: Mount the bracket on the wall using screws and anchors or the provided double-sided adhesive tape.
- Mount your doorbell: Attach your doorbell to the fixed bracket. Ensure it reaches the bottom and you hear a click.
- All set: Congratulations! You can now press the doorbell button to test it.
Specification
Video doorbell
Video & Audio
| Feature | Specification |
|---|---|
| Image Sensor | 1/2.7" CMOS |
| OS | Lite-OS |
| Infrared LED | High power IR LED with ICR |
| Lens | 1.7mm/F2.0 |
| 2-way audio with noise cancellation | 166° |
| Min. illumin. | Color: 0.01 Lux; B&W: 0.001Lux |
| WDR | Digital WDR |
| Audio | 2-way audio with noise cancellation |
Storage
| Feature | Specification |
|---|---|
| Storage Type | Micro SD Card (Max 128G) |
| Cloud storage | Support |
| Recording | Triggered by PIR motion sensor |
Network
| Feature | Specification |
|---|---|
| Wifi Frequency | 2.4 GHz ~ 2.4835 GHz |
| Standards | IEEE 802.11 b/g/n |
| Live View Speed | Within 3~4 Sec |
Software
| Feature | Specification |
|---|---|
| App Name | BoifunCam |
| OS | iOS, Android |
| Remote View | Within 2~4 sec |
| Notification | Push notification within 2~4 sec |
General
| Feature | Specification |
|---|---|
| Working Temp. & Humidity | -20℃~50℃; <90% (No condensation) |
| Power Source | Lithium 18650 Battery (3.5V, 3350mAh ) × 2/ AC 12V - 24V hardwire power/DC 12V hardwire power |
| Standby Current | 300μA |
| Working Current | 250mA |
| Standby Time | 4~6 Months |
| Working Time | 2~3 Months (20 times wake up per day) |
| Battery Charging | DC5V 1A ~ 2A (Micro USB Port) |
| Firmware Upgrade | OTA (Over-The-Air) |
| Dimension (mm) | 61x 41 x 144 |
| Weight (g) | 145 + 90 (Battery weight) |
Indoor Chime
General
| Feature | Specification |
|---|---|
| Power source | AAA 1.5V battery × 3 units |
| Consumption | 0.4W |
| Ringtones | 4 ringtongs optional |
| Volume | Max 100dB |
| Volume control | Low(mute), middle, high |
| Connection type | Radio frequency |
| Frequency | 433MHz-868MHz |
| Place of use | indoor |
| LED | Flashing red: reset/pairing mode; Solid blue: pairing successful |
| Working Temp. | -10℃~70℃ |
| Humidity | < 90%, no condensation |
| Dimension(mm) | 65×65 x 27mm |
| Weight (g) | 55 |
FAQS
Q1: Why I failed to set up Wi-Fi for the doorbell?
A1: 1) Device works with 2.4GHz Wi-Fi only, but not support 5GHz Wi-Fi. 2) Wi-Fi network is not good; try to keep the camera near the Wi-Fi router when setting up. 3) The Wi-Fi password is wrong. Please check if there are special characters in the password, or if the network is specially encrypted.
Q2: How to improve the battery life performance?
A2: 1) Set the recording time to 20-30 seconds, which is sufficient for daily needs. 2) Lower the "Motion Detection" sensitivity or enable the "Human Motion Detection" function. 3) If the doorbell faces the main road, adjust its angle to prevent unnecessary activation. 4) Ensure Wi-Fi signal strength is over 75%. If it's lower than 75%, the doorbell may be continuously activated. Install the camera closer to the router or use a Wi-Fi extender to improve performance.
Q3: How do I know if I have 2.4G or 5G Wi-Fi?
A3: Please check your router's user manual or contact your network operator.
Q4: Does it have to be on the same Wi-Fi to see the camera, or can it be viewed over the internet from anywhere?
A4: You can view the camera from anywhere, provided it is well connected to the internet.
Q5: Are recordings saved to the cloud, or mainly to the built-in SD card?
A5: It supports both SD card recording and cloud storage. You can activate the cloud storage service in the App.
Q6: What happens when the SD card is full?
A6: When the memory card is full, the camera automatically erases the oldest footage.
Q7: Why does it lose connection to Wi-Fi?
A7: Check the network connection of your phone and the Wi-Fi router. If the network signal strength is lower than 75%, the doorbell may be continuously activated. Install the camera closer to the router or use a Wi-Fi extender to improve performance.
Q8: Can motion detection be disabled?
A8: Yes. Recording is triggered by motion detection. You can adjust the sensitivity or disable motion detection in the settings menu.
Q9: Does it come with a charger for the batteries?
A9: A battery charger is not included. Please charge the batteries with a compatible USB charger (DC5V 1A~2A) for about 8-10 hours.
Q10: Can we have 2 or more doorbells at the same residence?
A10: Yes, you can add more than one device at the same residence.
Q11: If I have other questions, what can I do?
A11: If you encounter any other problems, please send your order and the problem description to admin@boifun.net.
