Sync Energy EV Charger Stands
Specification Sheet
Electric vehicle charger stands, available as single or twin, suitable for all Wall Charger 2 Models.
Range Features & Specifications
| EVASTAND12S-02 (Charger not included) | EVASTAND12T-02 (Charger not included) | |
|---|---|---|
| CODE: | EVASTAND12S-02 | EVASTAND12T-02 |
| DESCRIPTION: | SINGLE CHARGER STAND | TWIN CHARGER STAND |
| FIXINGS (CHARGER): | x4 M5 BOLTS | x8 M5 BOLTS |
| FIXINGS (BASE): | x4 CONCRETE GROUND BOLTS REQUIRED (NOT SUPPLIED). x4 FIXINGS BOLTS (NOT SUPPLIED) MUST BE SUITABLE FOR BASE CONSTRUCTION RECOMMENDED AT LEAST 100mm FIXINGS. | |
| COLOUR: | ZINC PLATED & RAL 7016 ANTHRACITE GREY | |
| CONSTRUCTION: | 3mm GALVANISED STEEL | |
| CABLE MANAGMENT: | INTERNAL | |
| DIMENSIONS (mm) (STAND): | 1210 (H) X 100 (W) X 50 (D) | |
| DIMENSIONS (mm) (STAND BASE): | 200 X 200 | |
| WARRANTY: | 3 YEARS | |
| RECOMMENDED BASE SIZE: |
350mm x 350mm x 250mm (without Crash Barrier) 800mm x 350mm x 200mm (with Crash Barrier) |
|
Diagrams
Stand Dimensions:
Height: 1210 mm
Width: 100 mm
Depth: 50 mm
Stand Base Dimensions:
Width: 200 mm
Length: 200 mm
Base Fixing Holes:
Hole diameter: Ø12.5 mm
Hole centres: 160 mm
