Sports Car Building Block Assembly Instructions
This document provides step-by-step assembly instructions for two distinct Sports Car models using building blocks. Please follow each step carefully to ensure correct construction.
General Information and Warnings
Instructions
Product Type: Sports Car
Age Recommendation: Ages 5+
Difficulty Level: 1
Adult Assistance is Recommended.
? WARNING: CHOKING HAZARD - SMALL PARTS. NOT SUITABLE FOR CHILDREN UNDER 3 YEARS.
Model 1: Red Sports Car (Vehicle Series 142)
Total Pieces: 142
Assembly Steps
Step 1
Attach two red 2x4 bricks to the grey base plate. Place one red 2x4 brick on the left side and another on the right side of the base.
Parts required: 2x red 2x4 bricks.
Step 2
Attach two grey 1x4 bricks on top of the red 2x4 bricks, bridging the gap in the center of the base.
Parts required: 2x grey 1x4 bricks.
Step 3
Attach one grey 2x8 brick to the front edge of the base plate.
Parts required: 1x grey 2x8 brick.
Step 4
Attach two grey 1x2 bricks to the front of the grey 2x8 brick.
Parts required: 2x grey 1x2 bricks.
Step 5
Attach one grey 2x4 brick and one grey 1x2 brick to the rear edge of the base plate.
Parts required: 1x grey 2x4 brick, 1x grey 1x2 brick.
Step 6
Attach one grey 1x4 brick and one grey 1x2 brick to the rear structure, on top of the pieces added in Step 5.
Parts required: 1x grey 1x4 brick, 1x grey 1x2 brick.
Step 7
Attach two red 1x2 bricks and two red 1x1 bricks to the rear structure, on top of the pieces added in Step 6.
Parts required: 2x red 1x2 bricks, 2x red 1x1 bricks.
Step 8
Attach two grey 2x4 bricks to the sides of the rear structure, connecting to the base and the pieces above.
Parts required: 2x grey 2x4 bricks.
Step 9
Attach one grey 2x2 brick and two grey 1x2 bricks to the front structure, on top of the pieces added in Step 4.
Parts required: 1x grey 2x2 brick, 2x grey 1x2 bricks.
Step 10
Attach two grey 1x2 bricks and two grey 1x1 bricks to the front structure, on top of the pieces added in Step 9.
Parts required: 2x grey 1x2 bricks, 2x grey 1x1 bricks.
Step 11
Attach two grey 2x4 bricks to the sides of the front structure, connecting to the base and the pieces above.
Parts required: 2x grey 2x4 bricks.
Step 12
Attach one red 1x2 brick to the rear structure, on top of the pieces added in Step 7.
Parts required: 1x red 1x2 brick.
Step 13
Attach two red 2x4 bricks to the sides of the rear structure, connecting to the base and the pieces above.
Parts required: 2x red 2x4 bricks.
Step 14
Attach one grey 2x4 brick to the front structure, and place one red 1x2 brick on top of it.
Parts required: 1x grey 2x4 brick, 1x red 1x2 brick.
Step 15
Attach one grey 2x2 brick and one red 1x2 brick to the front structure, on top of the pieces added in Step 14.
Parts required: 1x grey 2x2 brick, 1x red 1x2 brick.
Step 16
Attach two grey 2x4 bricks to the sides of the front structure, connecting to the base and the pieces above.
Parts required: 2x grey 2x4 bricks.
Step 17
Attach two grey 2x4 bricks to the sides of the front structure, connecting to the base and the pieces above.
Parts required: 2x grey 2x4 bricks.
Step 18
Attach one grey 2x2 brick and one red 1x2 brick to the front structure, on top of the pieces added in Step 15.
Parts required: 1x grey 2x2 brick, 1x red 1x2 brick.
Step 19
Attach one grey 2x4 brick to the front structure, and place one red 1x2 brick on top of it.
Parts required: 1x grey 2x4 brick, 1x red 1x2 brick.
Step 20
Attach two grey 2x4 bricks to the sides of the front structure, connecting to the base and the pieces above.
Parts required: 2x grey 2x4 bricks.
Step 21
Attach two grey 2x4 bricks to the sides of the front structure, connecting to the base and the pieces above.
Parts required: 2x grey 2x4 bricks.
Step 22
Attach one grey 1x2 brick to the front structure.
Parts required: 1x grey 1x2 brick.
Step 23
Attach one grey 1x2 brick to the front structure.
Parts required: 1x grey 1x2 brick.
Step 24
Attach one grey 2x4 brick to the front structure.
Parts required: 1x grey 2x4 brick.
Step 25
Attach two grey 2x4 bricks to the sides of the front structure.
Parts required: 2x grey 2x4 bricks.
Step 26
Attach two grey 2x4 bricks to the sides of the front structure.
Parts required: 2x grey 2x4 bricks.
Step 27
Attach two grey 2x4 bricks to the sides of the front structure.
Parts required: 2x grey 2x4 bricks.
Step 28
Attach one grey 2x4 brick to the front structure.
Parts required: 1x grey 2x4 brick.
Step 29
Attach two red 1x2 bricks and two red 1x1 bricks to the rear section of the car chassis.
Parts required: 2x red 1x2 bricks, 2x red 1x1 bricks.
Step 30
Attach two red 1x2 bricks to the rear section of the car chassis.
Parts required: 2x red 1x2 bricks.
Step 31
Attach two red 2x4 bricks to the sides of the rear section of the car chassis.
Parts required: 2x red 2x4 bricks.
Step 32
Attach one grey 2x2 brick and one grey 1x2 brick to the rear section.
Parts required: 1x grey 2x2 brick, 1x grey 1x2 brick.
Step 33
Attach one grey 2x4 brick and one grey 1x2 brick to the rear section.
Parts required: 1x grey 2x4 brick, 1x grey 1x2 brick.
Step 34
Attach two grey 1x2 bricks and two grey 1x1 bricks to the rear section.
Parts required: 2x grey 1x2 bricks, 2x grey 1x1 bricks.
Step 35
Attach two grey 2x4 bricks to the sides of the rear section.
Parts required: 2x grey 2x4 bricks.
Step 36
Attach one grey 2x4 brick and one red 1x2 brick to the rear section.
Parts required: 1x grey 2x4 brick, 1x red 1x2 brick.
Step 37
Attach one grey 2x2 brick and one red 1x2 brick to the rear section.
Parts required: 1x grey 2x2 brick, 1x red 1x2 brick.
Step 38
Attach one grey 1x2 brick to the rear section.
Parts required: 1x grey 1x2 brick.
Step 39
Attach one grey 1x2 brick to the rear section.
Parts required: 1x grey 1x2 brick.
Step 40
Attach one grey 2x4 brick to the rear section.
Parts required: 1x grey 2x4 brick.
Step 41
Attach two grey 2x4 bricks to the sides of the rear section.
Parts required: 2x grey 2x4 bricks.
Step 42
Attach two grey 2x4 bricks to the sides of the rear section.
Parts required: 2x grey 2x4 bricks.
Step 43
Attach one grey 2x4 brick to the rear section.
Parts required: 1x grey 2x4 brick.
Step 44
Attach the four black wheel assemblies to the underside of the car chassis.
Parts required: 4x black wheel assemblies (each with wheel and axle).
Completed Model (Red Sports Car)
The assembly is now complete. You have built a red Sports Car model.
Model 2: Blue Sports Car (Vehicle Series 138)
Total Pieces: 138
Assembly Steps
Step 1
Attach two blue 2x4 bricks to the grey base plate. Place one blue 2x4 brick on the left side and another on the right side of the base.
Parts required: 2x blue 2x4 bricks.
Step 2
Attach two grey 1x4 bricks on top of the blue 2x4 bricks, bridging the gap in the center of the base.
Parts required: 2x grey 1x4 bricks.
Step 3
Attach one grey 2x8 brick to the front edge of the base plate.
Parts required: 1x grey 2x8 brick.
Step 4
Attach two grey 1x2 bricks to the front of the grey 2x8 brick.
Parts required: 2x grey 1x2 bricks.
Step 5
Attach one grey 2x4 brick and one grey 1x2 brick to the rear edge of the base plate.
Parts required: 1x grey 2x4 brick, 1x grey 1x2 brick.
Step 6
Attach one grey 1x4 brick and one grey 1x2 brick to the rear structure, on top of the pieces added in Step 5.
Parts required: 1x grey 1x4 brick, 1x grey 1x2 brick.
Step 7
Attach two blue 1x2 bricks and two blue 1x1 bricks to the rear structure, on top of the pieces added in Step 6.
Parts required: 2x blue 1x2 bricks, 2x blue 1x1 bricks.
Step 8
Attach two grey 2x4 bricks to the sides of the rear structure, connecting to the base and the pieces above.
Parts required: 2x grey 2x4 bricks.
Step 9
Attach one grey 2x2 brick and two grey 1x2 bricks to the front structure, on top of the pieces added in Step 4.
Parts required: 1x grey 2x2 brick, 2x grey 1x2 bricks.
Step 10
Attach two grey 1x2 bricks and two grey 1x1 bricks to the front structure, on top of the pieces added in Step 9.
Parts required: 2x grey 1x2 bricks, 2x grey 1x1 bricks.
Step 11
Attach two grey 2x4 bricks to the sides of the front structure, connecting to the base and the pieces above.
Parts required: 2x grey 2x4 bricks.
Step 12
Attach one blue 1x2 brick to the rear structure, on top of the pieces added in Step 7.
Parts required: 1x blue 1x2 brick.
Step 13
Attach two blue 2x4 bricks to the sides of the rear structure, connecting to the base and the pieces above.
Parts required: 2x blue 2x4 bricks.
Step 14
Attach one grey 2x4 brick to the front structure, and place one blue 1x2 brick on top of it.
Parts required: 1x grey 2x4 brick, 1x blue 1x2 brick.
Step 15
Attach one grey 2x2 brick and one blue 1x2 brick to the front structure, on top of the pieces added in Step 14.
Parts required: 1x grey 2x2 brick, 1x blue 1x2 brick.
Step 16
Attach two grey 2x4 bricks to the sides of the front structure, connecting to the base and the pieces above.
Parts required: 2x grey 2x4 bricks.
Step 17
Attach two grey 2x4 bricks to the sides of the front structure, connecting to the base and the pieces above.
Parts required: 2x grey 2x4 bricks.
Step 18
Attach one grey 2x2 brick and one blue 1x2 brick to the front structure, on top of the pieces added in Step 15.
Parts required: 1x grey 2x2 brick, 1x blue 1x2 brick.
Step 19
Attach one grey 2x4 brick to the front structure, and place one blue 1x2 brick on top of it.
Parts required: 1x grey 2x4 brick, 1x blue 1x2 brick.
Step 20
Attach two grey 2x4 bricks to the sides of the front structure, connecting to the base and the pieces above.
Parts required: 2x grey 2x4 bricks.
Step 21
Attach two grey 2x4 bricks to the sides of the front structure, connecting to the base and the pieces above.
Parts required: 2x grey 2x4 bricks.
Step 22
Attach one grey 1x2 brick to the front structure.
Parts required: 1x grey 1x2 brick.
Step 23
Attach one grey 1x2 brick to the front structure.
Parts required: 1x grey 1x2 brick.
Step 24
Attach two blue 1x2 bricks and two blue 1x1 bricks to the rear section of the car chassis.
Parts required: 2x blue 1x2 bricks, 2x blue 1x1 bricks.
Step 25
Attach two blue 1x2 bricks to the rear section of the car chassis.
Parts required: 2x blue 1x2 bricks.
Step 26
Attach two blue 2x4 bricks to the sides of the rear section of the car chassis.
Parts required: 2x blue 2x4 bricks.
Step 27
Attach one grey 2x2 brick and one grey 1x2 brick to the rear section.
Parts required: 1x grey 2x2 brick, 1x grey 1x2 brick.
Step 28
Attach one grey 2x4 brick and one grey 1x2 brick to the rear section.
Parts required: 1x grey 2x4 brick, 1x grey 1x2 brick.
Step 29
Attach two grey 1x2 bricks and two grey 1x1 bricks to the rear section.
Parts required: 2x grey 1x2 bricks, 2x grey 1x1 bricks.
Step 30
Attach two grey 2x4 bricks to the sides of the rear section.
Parts required: 2x grey 2x4 bricks.
Step 31
Attach one grey 2x4 brick and one blue 1x2 brick to the rear section.
Parts required: 1x grey 2x4 brick, 1x blue 1x2 brick.
Step 32
Attach one grey 2x2 brick and one blue 1x2 brick to the rear section.
Parts required: 1x grey 2x2 brick, 1x blue 1x2 brick.
Step 33
Attach one grey 1x2 brick to the rear section.
Parts required: 1x grey 1x2 brick.
Step 34
Attach one grey 1x2 brick to the rear section.
Parts required: 1x grey 1x2 brick.
Step 35
Attach one grey 2x4 brick to the rear section.
Parts required: 1x grey 2x4 brick.
Step 36
Attach two grey 2x4 bricks to the sides of the rear section.
Parts required: 2x grey 2x4 bricks.
Step 37
Attach two grey 2x4 bricks to the sides of the rear section.
Parts required: 2x grey 2x4 bricks.
Step 38
Attach one grey 2x4 brick to the rear section.
Parts required: 1x grey 2x4 brick.
Step 39
Attach the four black wheel assemblies to the underside of the car chassis.
Parts required: 4x black wheel assemblies (each with wheel and axle).
Completed Model (Blue Sports Car)
The assembly is now complete. You have built a blue Sports Car model.
