Mini Block Velociraptor Assembly Instructions
Model Number: 43201044
Warning: Choking Hazard - Small Parts. Not for children under 3 years.
Recommended for ages 6+ years.
Adult assistance is recommended. Product may vary slightly from image shown.
Parts Overview
The following parts are used in the assembly process. Quantities are indicated by 'x' followed by the number of pieces.
- x2
- x2
- x5
- x5
- x4
- x2
- x2
- x2
- x2
- x6
- x1
- x2
- x2
- x2
- x1
- x1
- x2
- x3
- x1
Assembly Steps
Step 1
Attach two x1 blue blocks to the green base plate. Attach one x2 blue block to the green base plate. Attach one x2 blue block to the green base plate. Attach one x2 blue block to the green base plate.
Step 2
Assemble the main body of the velociraptor using blue blocks. The diagram shows a structure being built upwards and outwards.
Step 3
Continue building the velociraptor's body. The diagram shows adding more blue blocks to create the shape.
Step 4
Add more blue blocks to the structure. The diagram shows adding pieces to the sides and top.
Step 5
Continue assembling the body. The diagram shows adding more blue blocks.
Step 6
Add yellow blocks to the top of the velociraptor's body. The diagram shows placing yellow blocks along the spine.
Step 7
Add more yellow blocks and blue blocks to the body. The diagram shows attaching pieces to the sides.
Step 8
Add yellow blocks to the sides of the velociraptor's body. The diagram shows placing yellow blocks on the upper sections.
Step 9
Attach the head and tail sections. The diagram shows connecting pre-assembled parts to the main body. A question mark indicates a connection point.
Step 10
Assemble the head and tail components. The diagram shows small sub-assemblies using various colored blocks.
Step 11
Attach the assembled head and tail components to the main body. The diagram shows connecting these parts with arrows indicating placement.
Step 12
Assemble the legs. The diagram shows two separate leg assemblies, each consisting of several blue blocks.
Step 13
Attach the legs to the underside of the velociraptor's body. The diagram shows the legs being connected to the main structure.
Step 14
Add more blue blocks to the tail section. The diagram shows extending the tail.
Step 15
Continue building the tail. The diagram shows adding more blue blocks.
Step 16
Complete the tail assembly. The diagram shows the final tail piece being attached.
Step 17
Attach the wings. The diagram shows two wing-like structures being attached to the sides of the body.
Step 18
The completed Mini Block Velociraptor is shown. The model is assembled on a green base plate.
