Green Lion 4 In 1 Wireless Remote

Schematic View

Power On/Off: [Power Button] located at the top of the remote.

Direction Key: A circular directional pad for navigation.

Home/Return: Navigates to the home screen or returns to the previous screen.

Menu: Accesses the menu options.

Air Mouse: Activates the cursor control function.

MIC / LED Indicator: Microphone for voice input and an LED indicator for status.

Confirm: Selects or confirms an action.

Voice Input: [Microphone Icon] Press and hold to activate voice commands.

Increase Volume: [Volume Up Icon] Increases the audio volume.

Decrease Volume: [Volume Down Icon] Decreases the audio volume.

Keyboard: A full QWERTY keyboard layout on the back of the remote.

Fn LED Indicator: Indicates the status of the Fn key.

Type-C Charging Port: [USB Type-C Icon] For charging the device.

Indicator Guide

Pairing Instructions

Normally, remotes are pre-paired with the USB receiver. If the connection is lost:

1. Insert the USB receiver into the device. Place the remote and receiver within 2 inches of each other.
2. Press and hold the <Vol +> and <Vol -> buttons for 3 seconds.
3. The indicator light will flash 3 times quickly, then stay on, indicating pairing mode.
4. The indicator light will flash 3 more times quickly and turn off automatically upon successful pairing.
5. If the indicator light does not flash within 30 seconds and turns off, pairing has failed.

Instructions for Use

A. Control and Programming

The device can be controlled via IR (Infrared) and RF (Radio Frequency) signals.

• Without the USB receiver, front buttons (except mouse and voice) are IR controlled.
• With the USB receiver plugged in, the product is RF controlled by default. If the USB receiver is plugged in after IR programming, front buttons will be IR controlled first.
• Note: The power button is always IR controlled.

IR Connection Steps:

1. Align the remote's IR light with the product's IR light horizontally, within 0.5 inches.
2. Press and hold the button on the remote to program. The product's light will flash rapidly.
3. When the product's light flashes slowly, press the corresponding button on the remote.
4. The product will flash 3 times quickly, indicating successful IR programming for that button.
5. Repeat for each button. Note: Complete IR programming before plugging in the USB receiver.

B. Voice Assistant

Long press the voice button, then speak your command. (Requires Google Assistant and Google Voice Search app).

C. CPI Adjustment

The 6-axis gyroscope allows for 360° motion sensing for cursor control. Adjust cursor speed as follows:

1. CPI (Counts Per Inch) has 4 levels. Default is level 2. Higher levels mean faster cursor speed.
2. Press and hold the <OK> button, then use <Vol +> or <Vol -> to adjust speed.
3. The indicator light will flash 3 times quickly upon successful adjustment.

D. Keyboard Function

The device features a QWERTY keyboard. Press the <Fn> key to switch to number and symbol input mode.

Features

• Functions on the face-up side are operational; face-down functions are disabled to prevent accidental presses.
• If no operation occurs for 15 seconds, the air mouse enters sleep mode, and the indicator light turns off. Press any key to wake the remote.

Factory Reset

Press and hold the <OK> and <Left> buttons simultaneously until the indicator light flashes, then release both buttons.

Specifications

Notes

1. The product has a built-in lithium battery. Charging input voltage is 5V. Ensure it is fully charged before first use, especially if the battery is low.
2. If the remote has not been used for an extended period, ensure it is fully charged before use.
3. Use only the designated USB cable for charging. Overcharging may shorten battery life.
4. Avoid exposing the product to extreme temperatures (hot or cold) as this can reduce battery life.
5. Keep the product away from liquids, as moisture can damage the device.

Package Contents

1. Wireless Remote
2. USB Receiver
3. Charging Cable

Disposal

This product must not be disposed of as unsorted household waste. Separate waste for proper treatment and recycling in compliance with local waste management regulations.

Warranty

Products purchased directly from the Green Lion website or store come with a 24-month warranty. Products purchased from approved sellers have a 12-month warranty. To extend the warranty, visit https://www.greenlion.net/warranty, fill out the form, and upload a picture of the product. An email will confirm warranty extension upon acceptance.

For more information, visit: https://www.greenlion.net/warranty

Contact Us

For inquiries, contact Green Lion:

• Website: https://www.greenlion.net/
• Sales: sales@greenlion.net
• Service Support: Support@greenlion.net
• Telegram: @greenlion_global
• Instagram: @greenlion_global