FIBARO Motion Sensor FGMS-001
Product Overview
The FIBARO Motion Sensor FGMS-001 is a universal, Z-Wave Plus compatible multi-sensor. This device features a built-in motion sensor, temperature sensor, and light sensor. Additionally, through vibration detection, it can detect tampering attempts or earthquakes. The FIBARO Motion Sensor is battery-powered, completely wireless, and its casing allows for quick and non-invasive installation on any surface. The sensor's eye visually indicates motion, temperature level, and operating mode, and can also inform about Z-Wave network range. The device can be used for creating lighting scenes and presence monitoring systems.
For the full instruction manual and technical specifications, please visit our website: manuals.fibaro.com/en/motion-sensor
Important: Read the manual before attempting to install the device!
Basic Activation of the Device
Follow these steps to activate the device:
- Open the sensor's casing by turning the cover counter-clockwise.
- Remove the battery blocker.
- Locate the sensor nearby the main Z-Wave controller.
- Set the main Z-Wave controller into inclusion mode.
- Quickly, triple-click the B-button located inside the casing. The LED diode will glow blue to confirm setting into learning mode.
[Diagram: Location of the 'B' button inside the sensor casing]
B Button Location and Final Steps
After the initial setup:
- Wait for the device to be added into the system. Successful adding will be confirmed by the controller.
- Wake up the sensor by clicking the B-button.
- Close the cover by turning it clockwise.
- Install the sensor's holder in the desired location.
- Insert the device into its holder.
[Diagram: Illustrating the placement of the 'B' button within the sensor]
Specifications
| Feature | Value |
|---|---|
| Power supply | 3.0 V battery |
| Battery type | CR123A |
| Operating temperature | 0 to 40°C |
| Measured temperature range | -20 to 100°C |
| Light Intensity Measuring Range | 0-32000 LUX |
| Dimensions (diameter) | 46 mm |
| Radio frequency band | 868.0–868.6 MHz (EU), 869.7–870.0 MHz (EU), 868.7–869.2 MHz (RU), 915.0–928.0 MHz (ANZ) |
| Radio transmit power | EIRP max. -5dBm |
Warranty and Compliance
Simplified EU Declaration of Conformity:
Nice-Polska Sp. z o.o. declares that this device complies with essential requirements and other relevant provisions of Directive 2014/53/EU, 2011/65/EU, and 2015/863. The full text of the EU declaration of conformity is available at: www.manuals.fibaro.com
WEEE Directive Compliance: Devices marked with this symbol should not be disposed of with household waste. They must be handed over to an applicable collection point for the recycling of waste electrical and electronic equipment.
Visit our website to read the full warranty conditions: https://www.fibaro.com/warranty
⚠️ Attention! This product is not a toy. Keep away from children and animals!
The manual for your smart home device | FIBARO Manuals
Warranty conditions | FIBARO
