VCAHD140LWT/VCAHD140RWT - Manual - V1.0 09/28/2021
Voyager Observation Systems
NTSC SYSTEM VCAHD140LWT/VCAHD140RWT
VCAHD140LWT/VCAHD140RWT Features:
- High Performance CMOS Sensor
- IR LED Low Light Enhancement
- Waterproof (IP69K)
- Compact Size
Installation and Pin Out
The diagram illustrates the camera's connection points. Key elements include an 'Arrow locking location', 'Audio' input, 'Video From Camera' output, 'Ground/shield' connection, and '12V DC' power input. It also shows a 'Cable Connector End View' with a 'Standard Cable Connector' and a 'Waterproof Camera Connector'.
Specifications
| Specification | Value |
|---|---|
| Mounting Type | External Type |
| Image Sensor | 1/3 CMOS |
| Resolution | 700 TV Lines |
| Min Illumination | 0 Lux (with IR LED ON) |
| Waterproof Rate | IP69K |
| View Angle | 115°(H), 90°(V), 150°(D) |
| Dimension | 69.9(W) x 36.1(H) x 43.6 mm 2.74"(W) x 1.42"(H) x 1.72"(D) |
| Working Temperature | -40°C ~ +85°C |
| Weight | Approx. 0.8kg / 1.76lbs |
Camera to Bracket Hardware
| Specifications | QTY |
|---|---|
| Tapping Screw M3*8mm stainless | 1 |
| Flat Head self tapping screw M3*12mm | 4 |
Installation
Pre-drill holes with a 1/8" bit.
When using a spacer, be sure to use liquid sealant around the spacer to prevent water intrusion into the vehicle.
Bracket Mounting Dimensions
The bracket mounting dimensions are provided in millimeters (mm). The diagram shows a shape with key measurements: a length of 50 mm, a width of 27.7 mm, and a base length of 84.2 mm. There are four mounting holes, with a diameter of 4.6 mm indicated.
