AWH SERIES Architectural Heavy-Duty Wall Heater
WALL HEATERS
Technical Specifications:
- Temp Range: 40°-90°F
- CFM: 100
- Grille Gauge: 18
Ideal Spaces:
- Vestibules & Entrance Ways
- Lobbies & Hallways
- Stairwells
- Restaurants
- Conference Rooms
- Offices
- Basements
- Living/Family Room
Available Colors: White, Bronze
Certifications: ETL LISTED, Intertek
Warranty: 5 Year Element Warranty, 1 Year Workmanship Warranty
Features:
- BMS-compatible through an optional relay
- Contemporary bar-stock grille design provides optimized airflow
- Manual reset thermal overheat protector disconnects power in the event of accidental blockage
- Built-in tamper-resistant thermostat
- Permanently lubricated and enclosed fan motor for long life and low maintenance, gently distributes warmth
- Automatic fan delay eliminates cold drafts on start-up and discharges residual heat during shut down
- Power on/off switch for added safety during maintenance
Models & Specifications:
| CATALOG NO. | UPC | VOLTS | PHASE | WATTS | AMPS | BTU/HR. | SHIP WT. |
|---|---|---|---|---|---|---|---|
| AWH3150F | 685360161860 | 120 | 1 | 1500 | 12.5 | 5,118 | 25 lbs |
| AWH4307F | 685360161945 | 277 | 1 | 3000/1500 | 10.8/5.4 | 10,236/5,118 | 25 lbs |
| AWH4404F* | 685360161983 | 208 | 1 | 4000/2000 | 16.7/8.3 | 13,649/6,824 | 25 lbs |
| AWH4407F* | 685360162065 | 277 | 1 | 3000/1500 | 14.4/7.2 | 10,236/5,118 | 25 lbs |
| AWH4408F | 685360162102 | 240 | 1 | 4000/2000 | 14.4/7.2 | 13,649/6,824 | 25 lbs |
| AWH4504F* | 685360162188 | 208 | 1 | 4800 | 19.2/9.6 | 13,649/6,824 | 25 lbs |
| AWH4507F* | 685360162263 | 240 | 1 | 3600 | 20 | 16,378 | 25 lbs |
| AWH4508F | 685360162300 | 208 | 1 | 4800 | 17.3 | 12,284 | 25 lbs |
| AWH3180F | 685360161884 | 120 | 1 | 1800 | 17.3 | 16,378 | 25 lbs |
| AWH44043F | 685360162027 | 240 | 3 | 4000 | 15 | 12,284 | 25 lbs |
| AWH44083F | 685360162140 | 208 | 3 | 4800 | 15 | 16,378 | 25 lbs |
| AWH45043F | 685360162348 | 240 | 3 | 4000 | 23.1 | 13,649 | 25 lbs |
| AWH45083F | 685360162225 | 208 | 3 | 4800 | 8.6 | 16,378 | 25 lbs |
| AWH4303F | 685360164021 | 347 | 1 | 3000 | 11.1 | 10,236 | 25 lbs |
| AWH4503F | 685360164106 | 347 | 1 | 4800 | 11.6 | 16,378 | 25 lbs |
| AWH4306F | 685360164069 | 600 | 1 | 3000 | 13.3 | 10,236 | 25 lbs |
| AWH4506F | 685360164144 | 600 | 1 | 4800 | 13.8 | 16,378 | 25 lbs |
SKU Legend: Popular Products; * Extended Offering (Contact your local Marley Sales Representative for typically associated lead times)
NOTE: *Factory-wired for higher wattage, field-convertible to half wattage. Units not available to be wired with remote thermostats. Standard finish is Bronze; For White, add NW suffix to catalog number.
Optional Accessories:
| CATALOG NO. | UPC | DESCRIPTION | COLOR | SHIP WT* |
|---|---|---|---|---|
| AWHPE* | 685360007212 | Pneumatic/Electric switch. Factory set at 10 psig to "make" on pressure drop. May be field wired to "break" on pressure drop. Pressure set point adjustable to 30 psig. (field-installed) | - | 2 lbs |
| AWHR2 (24V)* | 685360007236 | Time delay relay 40-60 seconds to close when energized. Use 120V or 24V power supply from remote source (field-installed) | - | 2 lbs |
| AWHR12 (120V)* | 685360007229 | Time delay relay 40-60 seconds to close when energized. Use 120V or 24V power supply from remote source (field-installed) | - | 2 lbs |
| AWHS1 | 685360007267 | 1 in. deep surface mounting frame for semi-recessed installation | Bronze | 2 lbs |
| AWHS2 | 685360007281 | 2 in. deep surface mounting frame for semi-recessed installation | Bronze | 2 lbs |
| AWHSM | 685360007243 | Surface mounting frame for surface installations. Painted to match heater decor, 3 13/16 in. deep | Bronze | 5 lbs |
| SMFL | 685360174433 | Surface Mounting Frame | White | 5 lbs |
| SMFL1 | 685360174440 | 1 in. Semi-Recessed Frame | White | 2 lbs |
| SMFL2 | 685360174457 | 2 in. Semi-Recessed Frame | White | 2 lbs |
| LFKSFCNW | 685360160795 | 14-gauge security front cover | White | 6 lbs |
Note: *Will accommodate pneumatic/electric or low-voltage controls commonly used with computerized energy management systems
Dimensions and Clearances:
Mounting Limitations: For wall mounting, do not install back box closer than 8 in. from floor or adjacent wall. Do not install heater behind towel rack, behind door, in floor, in closet, in ceiling or where air flow may be obstructed. All controls are concealed behind the front cover making them essentially tamper proof.
Diagram showing dimensions: The main heater unit has a width of 15-3/4 inches and a height of 19-5/16 inches. The depth for the main unit is not explicitly labeled but accessory frames indicate depths of 1, 2, and 3-13/16 inches. Clearances are indicated as 1-1/4 inches on the side and 18-1/4 inches for the overall height including mounting. A separate diagram shows a width of 14-3/8 inches and a depth of 15-3/4 inches for the mounting frame.
