Welcome
Thank you for choosing the PETLIBRO Essential Automatic Feeder. This feeder is designed to provide your pet with consistent meals, ensuring they are fed on time, even when you're not home. Please read this manual carefully before use.
Important Safety Precautions ⚠️
- Read all instructions before operating the feeder.
- This appliance is intended for indoor use only.
- Do not immerse the main unit in water or any other liquid.
- Ensure the power adapter is unplugged before cleaning.
- Do not lift the pet feeder by the lid, food tank, or food tray. Lift and carry it using both hands and the base, while keeping the unit in an upright position.
- This product is not a toy. Keep out of reach of children.
- Check the feeder regularly for any damage.
- Do not use if the cord or plug is damaged.
- Ensure the feeder is placed on a stable, level surface.
Product Overview & Parts
The PETLIBRO Essential Automatic Feeder consists of several key components:
Main Unit
Contains the motor, control panel, and power supply.
Food Tank
Stores the dry pet food. Features a secure lid to keep food fresh.
Food Tray
Removable tray where the food is dispensed.
Desiccant Bag Holder
Located inside the lid to help keep food fresh.
Power Adapter
Connects the feeder to a power outlet.
Diagram Description: A visual representation shows the feeder with labels pointing to the lid, food tank, dispensing mechanism, control panel, food tray, and the power adapter port.
Setup and Installation
- Unpack: Carefully remove all components from the packaging.
- Assemble:
- Attach the food tray to the base of the main unit. Ensure it clicks securely into place.
- Place the desiccant bag (if included) into the holder inside the lid.
- Fill the food tank with your pet's dry food. Do not overfill.
- Securely close the lid.
- Power Connection:
- Connect the power adapter to the feeder's power port.
- Plug the power adapter into a wall outlet.
- The control panel will illuminate, indicating the feeder is powered on.
- Battery Backup (Optional): Insert batteries (not included) into the battery compartment for backup power in case of an outage.
Diagram Description: Step-by-step illustrations show how to attach the food tray, fill the food tank, close the lid, and connect the power adapter. Another diagram shows the battery compartment.
Operation
Control Panel
The control panel allows you to manage feeding schedules and settings.
Diagram Description: A close-up of the control panel showing buttons like 'Manual Feed', 'Program', 'Time Set', 'Hour', 'Minute', and a display screen.
Setting the Clock ⏰
- Press and hold the 'Time Set' button until the hour digits flash.
- Use the 'Hour' and 'Minute' buttons to set the current hour and minute.
- Press 'Time Set' again to confirm the hour.
- Use 'Hour' and 'Minute' to set the minutes.
- Press 'Time Set' again to confirm the minutes and exit clock setting mode.
Programming Feeding Schedules ?️
You can set up to 4 meals per day.
- Press the 'Program' button. The display will show '1' for the first meal.
- Use 'Hour' and 'Minute' buttons to set the desired feeding time for Meal 1.
- Press 'Program' again to set the portion size for Meal 1. Use 'Hour' and 'Minute' to adjust the portion (e.g., 1-10 portions, where each portion is approximately 5-10g depending on kibble size).
- Press 'Program' to move to Meal 2 and repeat the time and portion setting.
- Continue for up to 4 meals. Press 'Program' after setting Meal 4 to save all settings.
? Tip: Refer to the food packaging for recommended portion sizes for your pet.
Manual Feeding ➡️
To dispense a meal immediately:
- Press the 'Manual Feed' button.
- The feeder will dispense one portion of food.
- You can set the number of portions for manual feeding using the 'Program' button before pressing 'Manual Feed' if desired.
Voice Recording ?
Record a personal message to call your pet for meals.
- Press and hold the 'Record' button for 3 seconds. The indicator light will turn red.
- Speak clearly into the microphone.
- Press 'Record' again to stop recording.
- To play back your recording, press the 'Play' button.
- Your recording will play automatically before each scheduled meal.
Maintenance and Cleaning ?
- Unplug the feeder before cleaning.
- Food Tank & Tray: Remove the food tank and tray. Wash them with warm, soapy water. Rinse thoroughly and dry completely before reassembling. These parts are typically hand-wash only.
- Main Unit: Wipe the main unit with a damp cloth. Do not use abrasive cleaners. Ensure no water enters the electronic components.
- Dispensing Mechanism: Periodically check the dispensing mechanism for any food blockages and clean as needed.
- Desiccant Bag: Replace the desiccant bag every 2-4 weeks to maintain freshness.
Diagram Description: Illustrations show how to detach the food tank and tray, wash them, and wipe down the main unit.
Troubleshooting ❓
| Problem | Possible Cause | Solution |
|---|---|---|
| Feeder not dispensing food | Food tank is empty. | Refill the food tank. |
| Food blockage in the dispensing mechanism. | Unplug the feeder, remove the food tank, and clear any obstructions. Ensure the tray is properly attached. | |
| Power issue. | Check power adapter connection and outlet. Ensure batteries (if used) are inserted correctly. | |
| Incorrect time or schedule | Clock not set correctly. | Follow the 'Setting the Clock' instructions. |
| Incorrect program settings. | Review the 'Programming Feeding Schedules' section. | |
| Voice recording not playing | Recording not saved or microphone issue. | Re-record your message and ensure it is saved. Check for obstructions near the microphone. |
Specifications
- Model: PLAF002
- Capacity: Approx. 4L (depends on kibble size)
- Power Supply: AC Adapter (included) or 3 D-cell batteries (not included)
- Material: Food-grade ABS plastic
- Dimensions: [Approximate dimensions would be listed here]
- Weight: [Approximate weight would be listed here]
Warranty Information
PETLIBRO offers a [e.g., 1-year] limited warranty on this product. Please refer to the warranty card included in the packaging or visit the PETLIBRO website for full details and registration.
