Pyle PWMA4004BT Wireless BT Hybrid Amplifier Receiver

Safety Instructions

• ⚠️ Intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be strong enough to create a risk electric shock to a person.
• ❗ Intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

CAUTION: To reduce the risk of electric shock, DO NOT ATTEMPT TO OPEN THE AMPLIFIER OR REMOVE THE COVER. There are no user serviceable parts inside - please use a qualified technician for all servicing.

WARNING: To prevent electrical shock or fire hazard, this amplifier should not be exposed to rain or moisture. Do not place objects filled with liquid, such as vases, on the amplifier.

WHEN USING ELECTRICAL PRODUCTS, CAUTION SHOULD ALWAYS BE USED. PLEASE READ AND KEEP THESE SAFETY INSTRUCTIONS.

Precautions

1. Power Source: The unit should be connected to a power supply AC-115V/60Hz, AC-230V/50Hz.
2. Ventilation: The unit should be situated so that its location or position does not interfere with its proper ventilation. Place the unit at least 10cm away from the walls.
3. Water and Moisture: The unit should not be used near water-for example, near a swimming pool in a wet basement, etc.
4. Electric Shock: If a metal object, such as hair pin or needle comes into contact inside this unit, a dangerous electric shock may result. For families with children, never permit children to put anything, especially metal, inside this unit.
5. Enclosure Removal: Never remove the enclosure. If the internal parts are touched accidentally, a serious electric shock might occur.
6. Abnormal Smell: If an abnormal smell or smoke is detected, immediately turn the power OFF and pull out the power cord. Contact your dealer or nearest service station.

Front Panel

The front panel features various controls, inputs, and a display. Key elements include a power switch, rotary knobs for volume and tuning, buttons for mode selection, repeat, equalizer, and playback, input jacks for microphones and headphones, and a display window.

1. POWER SWITCH:

Press to switch the power unit ON or OFF.

2. [Tuning Knob]:

This knob is used to select the preview station which has been kept in system.

3. RPT button:

Repeat music control.

4. [Tuning Knob]:

This knob is used to select the next station which has been kept in system.

5. EQ button:

Control for Hall, Live, Jazz, Rock, Pop, Normal equalizer presets.

6. [Play/Pause]:

Play/pause song button on USB/SD card.

7. AM/FM SELECTOR:

Selects between AM and FM radio modes.

8. MODE button:

Mode switch button for input choice like USB/SD/BT/FM.

9. Source Input OPTI/COAX:

Selects the digital audio input source (Optical or Coaxial).

10. FUNCTION DISPLAYED FLUORESCENT WINDOW:

Displays current function and status.

11. SUB. VOLUME CONTROL:

Controls the subwoofer volume.

12. LED DIMMER:

Adjusts the brightness of the LED lights.

13. MASTER VOLUME CONTROL:

Adjusts the blue lights and blue rings. Adjusts the overall volume level. Turn the knob clockwise to increase the volume.

14. ECHO CONTROL:

Turn the knob to adjust the MIC echo level.

15. TREBLE:

Adjusts the master treble.

16. BASS:

Adjusts the master bass.

17. MIC VOLUME:

Adjusts the microphone volume level. Turn the knob clockwise to increase the MIC volume.

18. USB/SD:

Card input slot for USB flash drives and SD memory cards.

19. MIC INPUT JACKS 1 & 2:

Karaoke microphone input jacks.

20. HEADPHONE JACK:

Headphone connection jack (1/4").

21. INPUT SELECTOR:

Turn this button to choose the favorable input source.

22. USB CHARGE SELECTOR:

Selector for USB charging function.

23. BT ANTENNA:

Connection point for the Bluetooth antenna.

24. REMOTE CONTROL WINDOW:

Infrared receiver for the remote control.

25. AUX 1 Input:

Analog audio input jack (3.5mm).

Back Panel

The back panel contains various input and output terminals, antenna connections, and power options. It includes terminals for tuner antenna, audio inputs, subwoofer outputs, line outputs, speaker outputs (A and B), a cooling fan, a voltage selector switch, and the power cord connection.

1. TUNER ANT:

Connect for AM and FM antennas.

2. AUDIO INPUT JACKS:

Connect the audio output jacks of CD/CD/DVD, AUX to these jacks.

3. SUB-WOOFER OUTPUT JACKS 1 & 2:

Connect IPOD/MP3 or other devices to these jacks for subwoofer output.

4. LINE OUTPUT JACKS:

Connect the line input jacks to these jacks.

5. A SPEAKER OUTPUT TERMINALS:

Connect your primary speaker system to these terminals.

6. B SPEAKER OUTPUT TERMINALS:

Connect your other speaker system(s) to these terminals.

7. COOLING FAN:

Internal cooling fan.

8. 115V/230V SWITCH:

According to power voltage, push this button to the station of the 115V or 230V.

9. POWER CORD:

Connect to AC 115V/60Hz & 230V/50Hz outlet.

10. WIRELESS MIC ANTENNA:

Connection for the wireless microphone antenna.

CAUTION: SPEAKER IMPEDANCE 4-16Ω

Connectivity and Operation

Steps for Connecting with Wireless BT Device

1. Press MODE button under the LCD display screen and enter into Wireless BT mode.
2. Search on the Wireless BT device and you can find the Wireless BT name "PYLE PRO".
3. Select the "PYLE PRO" Wireless BT name and wait for the device to pair.
4. The unit will make a signal to confirm that the device has successfully paired and the screen will display "BLUETOOTH CONNECTED".
5. Once being paired, you can play music from your BT device. You can also use the control buttons on the unit to select the tracks from your BT device.

How to Replace Preset Radio Stations

Use the remote control or the front panel buttons to set the radio stations. Note: Preset stations cannot be deleted but can be replaced.

Operations Steps

1. Rotate the input selector switch to the BT/MP3/AM/FM/OPTI/COAX position.
2. Press the Mode key of the front panel or remote to select AM/FM.
3. Press the [Tuning] button (Previous/Next) to adjust to your favorite station number, then press and hold this button to auto scan the programs downward or upward. The tuner will automatically replace your favorite station number once found.

Remote Control

The remote control features a power button, equalizer button, track navigation buttons (previous, next), volume controls, mode selection, mute, scan, repeat, and number buttons for direct song selection. It also has a remote sensor window.

1. Standby Button:

Turns the unit on or off.

2. Equalizer Button:

Selects equalizer presets (Hall, Live, Jazz, Rock, Pop, Normal).

3. Previous Song [⏮️]:

Short press for previous music in BT/USB/SD, or previous program in AM/FM. Press and hold to auto scan programs downward in AM/FM.

4. Source Input Volume:

Adjusts volume for the selected input source.

5. MODE:

Menu control button. Press to select BT/USB/SD/AM/FM/LINE IN etc. audio input.

6. MUTE Button:

Mutes audio output. Works in radio/BT/USB/SD/AM/FM states.

7. Source Input Volume +:

Increases volume for BT/USB/SD state.

8. SCAN Button:

Press to auto scan programs in AM/FM system and save to program numbers.

9. Next Song [⏭️]:

Short press for next music in BT/USB/SD, or next program in AM/FM. Press and hold to auto scan programs upward in AM/FM.

10. Play/Pause [▶️/⏸️]:

Short press for play/pause in BT/USB/SD. Press and hold to auto scan programs in AM/FM system.

11. Repeat Song Button:

Repeat one music or repeat all.

12. Number Buttons for Song Selection:

Directly select songs or radio stations. Remote control should be operated within 6 meters with a scope of 30° in front of the receiver. Ensure no large obstacles and keep the remote sensor away from bright light.

Features

• Home Theater Pro Audio Receiver
• High-Powered Hybrid Pre-Amplifier
• Multi-Channel Source Audio Selection
• Built-in BT for Wireless Music Streaming
• Includes (2) UHF Wireless Handheld Microphones
• FM/AM Radio with Digital LCD Display
• USB Flash & SD Memory Card Readers
• MP3 Audio File Playback Support
• Connect & Stream Audio from External Devices
• Aux (3.5mm) Input Jack
• (2) 1/4" Microphone Inputs
• Headphone Jack, 1/4"
• RCA (L/R) Audio Input/Output Jacks
• Dedicated for Subwoofer Output
• Screw-Type Speaker Terminal Binding Posts
• Front Panel Button & Rotary Control Center
• Independent Audio Source Selection
• LED Backlight Illumination with Dimmer Control
• Microphone Volume/Echo Control
• Integrated Overload & Short Circuitry Protection
• Built-in Cooling Fan
• Universal Rack Mount Design

What's in the Box

• Hybrid Pre-Amplifier
• (2) UHF Wireless Handheld Microphones
• Detachable Rack-Mount Brackets
• FM/AM Antenna/Wireless BT Antenna
• Remote Control
• Power Cable

Wireless BT Connectivity

• Built-in Receiver for Wireless Audio Music Streaming
• Simple & Hassle-Free Pairing
• Works with All of Today's Latest Devices (Smartphones, Tablets, Laptops, Computers, etc.)
• Wireless BT Version: 5.0
• Wireless BT Network Name: 'PYLE PRO'
• Wireless Range: 40'+ ft.

Technical Specs

• Power Output: 3000 Watt MAX
• 900 Watt @ 2 Ohm
• 450 Watt @ 4 Ohm
• 300 Watt @ 8 Ohm
• Frequency Response: 40Hz-15kHz, +/-2dB
• S/N Ratio: >76dB
• T.H.D.: <1%
• Radio Station Memory Presets: 30
• Digital Media File Playback Support: MP3/WMA/WAV/FLAC/APE
• Maximum USB/SD Flash Memory Support: Up to 64GB
• Battery Operated Remote: Requires (2) LR03/1.5V Batteries, Not Included
• Battery Operated Mic: Requires (2) x 'AAA' Batteries Each, Not Included
• Power Cord Length: 4.5' ft.
• Power Supply: 115/230V, Switchable
• Unit Dimensions (L x W x H): 19.0" x 12.0" x 3.1" –inches

WARNING: This product can expose you to a chemical or group of chemicals, which may include "Lead (PB)" which is known in the state of California to cause cancer, birth defects, or other reproductive harm. For more info, go to https://www.p65warnings.ca.gov/.

Questions? Issues?

We are here to help!

Phone: (1) 718-535-1800

Email: support@pyleusa.com