Instruction Winter Cover

Introduction

When to use a winter cover?

This section introduces the purpose of the winter cover.

Safety

[Warning symbol] Safety

If a gas oven is installed above your fridge, the winter cover must be removed as soon as the gas bottle is open.

[temperature below 6°C] [caravan] [cleaning supplies]

Warranty

For our warranty clause, please refer to the conditions mentioned on www.thetford-europe.com/service/warranty. For more information, please contact Thetford Customer Service in your country.

Position and Placement

Follow these steps for correct installation:

1. Step 1

   Align the smaller winter cover piece with the vent opening. A horizontal arrow indicates the direction of alignment.

   [Diagram: Vent grille with arrows indicating alignment with a smaller cover piece.]

2. Step 2

   Open the main winter cover. Curved arrows show the cover being swung open.

   [Diagram: The main cover being opened or tilted.]

3. Step 3

   Insert the smaller cover piece into the vent frame. An upward arrow indicates the direction of insertion.

   [Diagram: A cover piece being inserted upwards into the vent frame.]

4. Step 4

   Attach the main winter cover to the vent frame. Curved arrows show the cover being secured. A magnified view shows a clip mechanism engaging.

   [Diagram: The main cover being attached to the vent frame, with a close-up of a clip mechanism.]