Important Safety Instructions

Device Update

Typically, some devices are updated bi-monthly, but not always so specific. Some devices, especially those that went on sale more than three years ago, will only be updated if a critical vulnerability is found and fixed.

To satisfy RF exposure requirements, a separation distance of 20 cm or more should be maintained between this device and persons during device operation. To ensure compliance, operations at closer than this distance is not recommended. The antenna used for this transmitter must not be co-located in conjunction with any other antenna or transmitter.

Ensure the robot is always connected to a network, for smart features to function properly.

For EU Countries

For EU Declaration of Conformity information, visit https://www.ecovacs.com/global/compliance.

Correct Disposal of this Product

This marking indicates that this product should not be disposed of with other household waste throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To recycle your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can safely recycle this product.

European Union Compliance Statement

Information on Disposal for Waste Electrical & Electronic Equipment

This symbol on the product or on its packaging indicates that used electrical and electronic products should not be mixed with unsorted municipal waste. For proper treatment, it is your responsibility to dispose of your waste equipment by arranging to return it to designated collection points. Disposing of this product correctly will help save valuable resources and prevent any potential negative effects on human health and the environment, which could otherwise arise from inappropriate waste handling.

To return your used device, please use the return and collection systems or contact the retailer where the product was purchased, which is free of charge. Please contact your local authority for further details of your nearest designated collection point. Penalties may be applicable for incorrect disposal of this waste, in accordance with your national legislation.

Restriction of the use of certain hazardous substances (RoHS) Directive

Ecovacs Home Service Robotics Co., Ltd. hereby declares the whole product including parts (cables, cords, and so on) meets the requirements of RoHS Directive 2011/65/EU and amendment Commission Delegated Directive (EU) 2015/863 on the restriction of the use of certain hazardous substances in electrical and electronic equipment ("RoHS recast" or "RoHS 2.0").

Radio Equipment Directive

Ecovacs Home Service Robotics Co., Ltd. hereby declares that the product listed in this section comply with the essential requirements and other relevant provisions of the Radio Equipment Directive 2014/53/EU.

Europe Authorised Representative:

ECOVACS Europe GmbH
Holzstrasse 2 | D-40221 Düsseldorf | Germany

Ecovacs Home Service Robotics Co., Ltd. hereby declares that the product comply with the essential requirements and other relevant provisions of the RoHS Directive 2011/65/ EU and amendment Commission Delegated Directive (EU) 2015/863, the Radio Equipment Directive 2014/53/EU. The declaration of conformity can be viewed at the following address: https://www.ecovacs.com/global/compliance.

PACKAGE CONTENTS

OZMO Pro 2.0 Vibrating Mopping System and Vacuum Module (DKX55)

Robot

Auto-Empty Station

Side Brush

Instruction Manual

Base

Reservoir and Mopping Pad Module (DKX56)

Reservoir (pre-installed)

Mopping Pad Plate

Washable Mopping Pad

Note: Figures and illustrations are for reference only and may differ from actual product appearance. Product design and specifications are subject to changes without notice.

PRODUCT DIAGRAM

Robot

Navigation Module

Obstacle Avoidance Module

Buttons

• Short Press: Return to charge
• Short Press: Start/Pause/Continue
• Short Press: Start/End Spot Clean
• Long Press: Power on/off
• Long Press: Child Lock

RESET Button

Connect to App: Short-press RESET Button and follow voice prompts to connect to the App.

Restore to default settings: Press and hold RESET Button for 5 s. After you hear the voice prompt, the startup music will be played and the robot will be restored to default settings.

Charging Contacts

Data Transfer Port (For professional maintenance personnel use only)

Wi-Fi Status Indicator

Edge Sensor

Bottom View (DKX55)

Top Cover

Buttons

Bumper

Brush

Vacuum Module

Anti-drop Sensor

Carpet Detection Sensor

Universal Wheel

Side Brush

Brush Release Button

Driving Wheels

OZMO Pro 2.0 Vibrating Mopping System

Reservoir

Washable Mopping Pad

Reservoir Release Button

Dust Bin

Filter

Sponge Filter

Dust Disposal Port

Dust Bin Handle

Filter Net

Release Button

Bottom View (DKX56)

Anti-drop Sensor

Carpet Detection Sensor

Brush

Universal Wheel

Side Brush

Brush Release Button

Driving Wheels

Mounting Slots for Mopping Pad Plate

Reservoir

Mopping Pad Module

Mopping Pad Plate

Washable Mopping Pad

Note: Figures and illustrations are for reference only and may differ from actual product appearance. Product design and specifications are subject to changes without notice.

Auto-Empty Station

Container Release Button

Dust Container

LED Indicator (Solid White: Standby/Running; Goes out: Power Outage/Deep Sleep Mode)

Charging Contacts

Dust Release Toggle

Power Cord

Auto-Empty Inlet

SENSORS

NOTES BEFORE CLEANING

Tidy up the area to be cleaned by putting furniture, such as chairs, in their proper place.

During the first use, make sure each room door is open to help DEEBOT fully explore your house.

It may be necessary to place a physical barrier at the edge of a drop to stop the unit from falling over the edge.

Put away objects including cables, cloths and slippers, etc. on the floor to improve the cleaning efficiency.

Before using the product on a rug with tasseled edges, please fold the rug edges under.

Please do not stand in narrow spaces, such as hallways, and make sure not to block sensors.

QUICK START

Please remove all protective materials before use.

1 Installation

The sound of Click indicates proper installation.

DOWNLOAD THE ECOVACS HOME APP

To enjoy all available features, it is recommended to control your DEEBOT via the ECOVACS HOME App.

1. Scan the QR Code under the Top Cover to download the App.

2. Search ECOVACS HOME to download the App.

POWER ON DEEBOT

Press and hold for 3 seconds to power on DEEBOT.

2 Place the Auto-Empty Station

Keep the area around the Auto-Empty Station clear of objects, especially objects with reflective surfaces.

Dimensions for placement:

• Left side: ≥ 0.05m (0.16')
• Right side: ≥ 0.05m (0.16')
• Front side: ≥ 0.8m (2.62')

CONNECT DEEBOT WITH APP

Wi-Fi Network Requirements:

• You are using a 2.4 GHz or 2.4/5 GHz mixed network.
• Your router supports 802.11b/g/n and IPv4 protocol.
• Do not use a VPN (Virtual Private Network) or Proxy Server.
• Do not use a hidden network.
• WPA and WPA2 using TKIP, PSK, AES/CCMP encryption.
• WEP EAP (Enterprise Authentication Protocol) is not supported.
• Use Wi-Fi channels 1-11 in North America and channels 1-13 outside North America (refer to local regulatory agency).
• If you are using a network extender/repeater, the network name (SSID) and password are the same as your primary network.
• Please enable the WPA2 on your router.

Wi-Fi Indicator

Please be aware that the realization of intelligent functions such as remote startup, voice interaction, 2D map display and control settings, and personalized cleaning (depending on different products) requires users to download and use the ECOVACS HOME App, which is constantly updated. You need to agree to our Privacy Policy and User Agreement before we can process some of your basic and necessary information and enable you to operate the product. If you do not agree with our Privacy Policy and User Agreement, some of the aforementioned intelligent functions cannot be realized through the ECOVACS HOME App, but you can still use the basic functions of this product for manual operation.

CHARGE DEEBOT

Short-press [home icon] to recall DEEBOT back to the Auto-Empty Station to charge.

Charging Time: Approximately 6.5 hours.

OPERATE DEEBOT

Remove the Mopping Pad Plate/Module before mapping. When creating a map for the first time, please follow DEEBOT to help eliminate some minor issues.

For example, DEEBOT may get stuck under the furniture. Please refer to the following solutions:

1. Raise your low sitting furniture if possible;
2. Cover the bottom of the furniture;
3. Set up Virtual Boundary via the App.

Before first vacuuming, please make sure DEEBOT is in the Auto-Empty Station and fully charged. Short press [home icon] to start cleaning and mapping.

Note:

• Do not frequently remove washable mopping pads.
• Do not use a rag or any other object to scratch the Moping Pad Plate.
• When the ECOVACS HOME App prompts that the mopping pad needs to be replaced, please replace it in time. Explore more accessories at ECOVACS HOME App or at https://www.ecovacs.com.

TECHNICAL SPECIFICATIONS

Output power of the Wi-Fi module is less than 100 mW.

Note: Technical and design specifications may be changed for continuous product improvement. Explore more accessories at https://www.ecovacs.com.

Please use the mobile camera to scan the QR code and obtain the user guide.