PC93100290 INSTR
This art is supplied at 100% size. Do not resize, reshape or alter in any way.
GETTING STARTED GUIDE
See inside for steps.
ADJUST THE MOTION DETECTION ZONE
Set the sensor head for optimal motion detection.
NOTE: The sensor will be more sensitive to motion across its detection path than motion directly towards it.
NOTE: The detector is more sensitive to motion across its field of view.
A visual representation of a motion sensor with an adjustable head. Two detection patterns are illustrated: 'LEAST SENSITIVE' shows a wider, shorter detection cone, and 'MOST SENSITIVE' shows a narrower, longer detection cone.
SETTING SENSITIVITY
Set the sensitivity of the PIR sensor to Low, Medium or High:
- LOW: The sensor's detection distance is approximately 25 feet.
- MEDIUM: The sensor's detection distance is approximately 40 feet.
- HIGH: The sensor's detection distance is approximately 60 feet.
Visuals of control dials for setting the motion sensor sensitivity to 'Low', 'Medium', or 'High'.
SETTING BRIGHTNESS
Brightness can be set to 0%, 15%, 30%, 50% or 100%. When motion is detected, the light will illuminate from the established brightness to 100% brightness.
Visuals of control dials for setting the light's brightness levels, typically ranging from 0% to 100%.
SETTING GROUP
The fixtures can be divided and linked into four groups: A, B, C, and D. If one fixture in the group is triggered via motion, the other fixtures linked to the same group simultaneously turn on to 100% brightness.
To operate your fixture separately from any group, set the setting to "X".
A diagram illustrating how multiple fixtures can be assigned to one of four groups (A, B, C, or D) for synchronized operation.
LINKING GROUPS
To link fixtures:
- Set the desired fixtures to the same Group (A, B, C or D) on the control panel.
- Power on the desired fixtures.
- Within 2 minutes of "power on", press the Web button on one fixture.
Fixtures will flash 3 times to indicate the fixtures are now linked.
All the group linkable lights should set up at the same time.
A visual guide demonstrating the process of linking fixtures, which involves setting groups and pressing a 'Web' button on one fixture within a specific timeframe after powering on.
BUILT IN DUSK TO DAWN SENSOR
DAY: Light will operate all the time.
DUSK: Light will operate from dusk to dawn. At dawn, the lamp will stop operating.
NIGHT: Light will operate from night to dawn.
A visual representation of the controls for the built-in dusk-to-dawn sensor, offering modes such as 'DAY' (always on), 'DUSK' (dusk to dawn), and 'NIGHT' (night to dawn).
SETTING ACTIVATION TIMER
Visuals of control dials for setting the activation timer, with options such as '10Min' (10 minutes) and 'Always'.
