Thermador T24ID800LP 24-Inch Flush Freezer Column with External Ice & Water Dispenser
FREEDOM® COLLECTION, PANEL-READY, LEFT-HAND DOOR SWING
Features & Benefits
- Freedom® Hinge enables true flush design
- All-stainless steel exterior dispenser
- Full-height door - true cabinet integration without exposed venting grille
- All-LED sidewall and theater lighting
- Brightspace interior design
Temperature Ranges
| Freezer | $-9^{\circ} \mathrm{F}\left(-23^{\circ} \mathrm{C}\right)$ to $7^{\circ} \mathrm{F}$ $\left(-14^{\circ} \mathrm{C}\right)$ |
| SuperFreeze® | $-9^{\circ} \mathrm{F}\left(-23^{\circ} \mathrm{C}\right)$ for approximately 52 hours |
| Energy Saving (Economy) Mode | $3^{\circ} \mathrm{F}\left(-16^{\circ} \mathrm{C}\right)$ |
Accessories (Optional)
Stainless Steel Panel Options:
- TFL24ID800 - Flat Stainless Steel Panel w/Dispenser
- TCH24ID800 - Chiseled Stainless Steel Panel w/Dispenser
Handle Options:
- PR36HNDL10 - 36-Inch Professional
- MS36HNDL10 - 36-Inch Masterpiece®
- FRAMEKIT10 - Freedom® Frame Kit
- HEATRKIT10 - Freedom® Heater Kit
Filters:
- REPLFLTR10 - Freedom® Water Filter
- SCRNFLTR10 - Filter By-Pass
General Properties
| Panel Ready | Yes |
| Reversible Door Swing | No |
| Lighting | All-LED Sidewall and Theater Lighting |
| Full Width Shelves | 2 |
| Adjustable Shelves | 2 |
| Shelf Material | Metal |
| Full Extension Drawers at 90° Door Opening Angle | Yes |
| Door Bins | 2 |
| LED-Illuminated Dispenser | Yes |
| Oversized Dispenser Opening | Yes |
| Chilled Water, Crushed And Cubed Ice | Yes |
| Rapid Water Replenishment System | Yes |
| Ice Maker with Freeflow® Ice System | Yes |
| Door Open Alarm | Yes |
| Special Modes | Sabbath, Economy, Vacation |
Capacity
| Total Unit Gross Capacity (cu. ft.) - AHAM | 11.3 cu. ft. |
| Freezer Gross Capacity (cu. ft.) | 11.3 cu. ft. |
Performance
| Dedicated Evaporator & Compressor System | Yes |
| SuperFreeze® | Yes |
| Defrost Process | Frost-Free |
Technical Details
| Watts (W) | 565 W |
| Current (A) | 15 A |
| Volts (V), Frequency (Hz) | $120 \mathrm{~V}, 60 \mathrm{~Hz}$ |
| Power Cord Length (in.) | $78 \frac{3}{4}" $ |
| Plug Type | $120 \mathrm{~V}-3$ Prong |
Dimensions & Weight
| Appliance Dimensions (H x W x D) (in.) | $84^{\prime \prime} \times 23 \frac{3}{4}^{\prime \prime} \times 24^{\prime \prime}$ |
| Required Cutout Size (H x W x D) (in.) | $84^{\prime \prime} \times 24^{\prime \prime} \times 24 \frac{3}{4}^{\prime \prime}$ |
| Net Weight (lbs) | 325 lbs |
Efficiency
| ENERGY STAR® Qualified | Yes |
| Annual Energy Consumption | 494 kWh |
Warranty
| Limited, Entire Appliance, Parts and Labor on Any Part of the Refrigerator that Fails Because of a Manufacturing Defect | 2 Year |
| Limited Warranty for Sealed Refrigeration System*; Parts And Labor | 3rd to 6th Year |
| Limited Warranty for Sealed Refrigeration System*; Parts Only | 7th to 12th Year |
* Sealed refrigeration system includes compressor, evaporator, condenser, dryer / strainer and connection tubing.
Cutout Dimensions
The following diagrams illustrate the required cutout dimensions and clearances for installation. These are critical for proper appliance function and integration.
Diagram Description: The diagram shows a side view of the freezer column with dimensions for installation. Key areas are labeled A, B, and C. Area A is for the installation of the panel. Area B is for running the water line, with a note that the waterbox should be placed adjacent to the appliance for service access. If not possible, the water supply socket can be placed in areas A and B. Area C indicates niche depth depends on the furniture door. A note specifies that the cutout for the door is 12 inches and vertically aligned.
Top View Clearance Diagram Description: This diagram shows a top-down view of the freezer column within its installation space, indicating necessary clearances. Dimensions are provided for the width and depth of the appliance and the required cutout. It also shows the swing of the door opening to 115 degrees and 90 degrees, with corresponding dimensions.
Panel Dimensions
Diagram Description: This diagram provides detailed dimensions for the custom panel that can be fitted to the freezer door for a seamless look. It includes measurements for the height, width, and thickness of the panel, as well as how it integrates with the appliance door. An asterisk indicates that the panel thickness excludes the door panel itself, and a 3/4" thickness panel results in a total depth of 24 3/4".
Important Information
These warranties give you specific legal rights and you may have other rights that vary from state to state. Full warranty and limited warranty from date of installation. For complete warranty details, refer to your Use & Care manual, or ask your dealer.
Specifications are for planning purposes only. Refer to installation instructions and consult your countertop supplier prior to making counter opening. Consult with a heating and ventilation engineer for your specific ventilation requirements. For the most detailed information, refer to installation instructions accompanying product or write to Thermador indicating the model number. Specifications are correct at time of printing. Thermador reserves the right to change product specifications or design without notice. Some models are certified for use in Canada. Thermador is not responsible for products that are transported from the U.S. for use in Canada.
