AJAX FireProtect 2 SB (Heat/CO) Jeweller

Quick Start Guide

Product Overview

The FireProtect 2 SB (Heat/CO) Jeweller is a wireless heat and carbon monoxide alarm designed for home safety.

Before using the device, it is recommended to review the User Manual available on the website: ajax.systems/support/devices/fireprotect-2-sb-heat-co/.

Specifications

FeatureSpecification
Frequency range905-926.5 MHz FHSS (complies with part 15 of the FCC rules)
Power density RF≤0.60 mW/cm²
Sound notification volume85 dB at a distance of 10 ft
Radio signal rangeup to 5,500 ft (in an open space)
Power supply2 batteries CR 2/3
Operation from batteryup to 10 years
Operating temperature range32°F to 122°F
Operating humidityup to 80%
Dimensions3.39 x 3.39 x 1.71'
Weight5.11 oz

Batteries are not replaceable and after 10 years, the FireProtect 2 SB (Heat/CO) Jeweller must be replaced.

Complete Set

Regulatory Compliance

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

To maintain compliance with FCC's RF Exposure guidelines, this equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. Use only the supplied antenna.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

ISED Compliance (Canada)

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any Interference, including Interference that may cause undesired operation of the device.

To maintain compliance with ISED's RF Exposure guidelines, this equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. Use only the supplied antenna.

Warranty and Support

Warranty: The warranty for Ajax devices is valid for two years after the purchase date and does not apply to the supplied accumulator (battery).

If the device does not work correctly, contact the support service. In many cases, technical issues can be solved remotely.

The full text of the warranty is available on the website: www.ajax.systems/warranty.

User Agreement: www.ajax.systems/end-user-agreement.

Technical support: support@ajax.systems.

Manufacturer Information

The manufacturing date is indicated on a sticker at the bottom of the box. The importer's name, location, and contact details are indicated on the package.

Manufacturer: "AS Manufacturing" LLC.

Address: 5 Sklyarenka Str., Kyiv, 04073, Ukraine.

Website: www.ajax.systems.

Models: FP2J80000NA, FIHTCOJ2, 2AX5VFIHTCOJ2, FP2J8NA Heat and CO Alarm, FP2J8NA, Heat and CO Alarm, and CO Alarm, Alarm

PDF preview unavailable. Download the PDF instead.

GetApplicationAttachment.html?id=7872864 Adobe Acrobat 11.0 Adobe Acrobat 11.0 Image Conversion Plug-in

Related Documents

Preview AJAX FireProtect 2 (Heat/Smoke/CO) Jeweller Technical Data Sheet
Technical data sheet for the AJAX FireProtect 2 Jeweller, a wireless smoke, heat, and carbon monoxide detector with a built-in siren. Details features, operating principles, technical specifications, and compatibility.
Preview Ajax FireProtect 2 AC (Heat) Jeweller User Manual - Installation, Features, and Operation
Comprehensive user manual for the Ajax FireProtect 2 AC (Heat) Jeweller wireless mains-powered fire detector. Covers installation, features, operation, testing, maintenance, and troubleshooting.
Preview Ajax FireProtect Plus User Manual: Smoke, Heat, and CO Detector Guide
Comprehensive user manual for the Ajax FireProtect Plus wireless indoor fire detector. Learn about its features, installation, operation, settings, and maintenance for smoke, heat, and carbon monoxide detection.
Preview AJAX FireProtect 2 AC (Heat_CO) Jeweller User Manual
User manual for the AJAX FireProtect 2 AC (Heat_CO) Jeweller, a dual-sensor fire and carbon monoxide detector. Learn about installation, operation, features, and maintenance for reliable home safety.
Preview Ajax FireProtect 2 (Heat/Smoke/CO) Jeweller User Manual
Comprehensive user manual for the Ajax FireProtect 2 (Heat/Smoke/CO) Jeweller wireless fire detector. Learn about its smoke, heat, and CO detection capabilities, installation, operation, and maintenance within the Ajax security system.
Preview FireProtect 2 (CO) Jeweller User Manual - Ajax Systems
Comprehensive user manual for the Ajax FireProtect 2 (CO) Jeweller wireless fire detector. Learn about its features, installation, operation, testing, maintenance, and troubleshooting for detecting carbon monoxide.
Preview Ajax FireProtect Plus: Wireless Smoke, Heat, and CO Detector User Manual
This user manual provides comprehensive instructions for the Ajax FireProtect and FireProtect Plus wireless indoor fire detectors. It details features, operating principles, connection methods to Ajax and third-party security systems, device states, settings, interconnected alarm functionality, installation, maintenance, and technical specifications.
Preview Ajax FireProtect / FireProtect Plus Wireless Fire Detector User Manual
This user manual provides comprehensive information on the Ajax FireProtect and FireProtect Plus wireless indoor fire detectors. It covers product features, functional elements, operating principles for smoke, temperature, and carbon monoxide detection, setup and connection procedures to Ajax security systems and third-party systems, device states and settings, interconnected alarm functionality, indications, testing, installation guidelines, autonomous use, maintenance, battery replacement, technical specifications, and warranty information.