TP-Link | Omada

CE Mark Warning

CE

This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

OPERATING FREQUENCY (maximum transmitted power)

• 2400 MHz - 2483.5 MHz (20dBm)
• 5150 MHz - 5250 MHz (23dBm)
• 5250 MHz - 5350 MHz (23dBm)
• 5470 MHz - 5725 MHz (30dBm)
• WCDMA Band 1/3/8 (24dBm+1.7/-3.7dB)
• LTE Band 1/3/7/8/20/28/38/40 (23dBm+2.7/-2.7 dB)

EU Declaration of Conformity

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2011/65/EU and (EU) 2015/863.

The original EU declaration of conformity may be found at tp-link.com/en/ce/

RF Exposure Information

This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way of health protection.

The device complies with RF specifications when used at 22 cm from your body.

Frequency band: 5150 - 5250 MHz:

• Indoor use: Inside buildings only. Installations and use inside road vehicles and train carriages are not permitted.
• Limited outdoor use: If used outdoors, equipment shall not be attached to a fixed installation or to the external body of road vehicles, a fixed infrastructure or a fixed outdoor antenna. Use by unmanned aircraft systems (UAS) is limited to within the 5170 - 5250 MHz band.

Frequency band: 5250 - 5350 MHz:

• Indoor use: Inside buildings only. Installations and use in road vehicles, trains and aircraft are not permitted. Outdoor use is not permitted.

Frequency band: 5470 - 5725 MHz:

• Installations and use in road vehicles, trains and aircraft and use for unmanned aircraft systems (UAS) are not permitted.

National Restrictions

The following table lists country codes for national restrictions:

AT BE BG CH CY CZ DE DK EE EL ES FI FR HR HU IE IS IT LI LT LU LV MT NL NO PL PT RO SE SI SK UK(NI)

UKCA Mark

UK CA

UK Declaration of Conformity

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017.

The original UK declaration of conformity may be found at tp-link.com/support/ukca/

National Restrictions (Great Britain)

Attention: In Great Britain, the operation in the frequency range 5150MHz - 5350MHz is only permitted indoors.

UK ⚠️

Korea Warning Statements

This equipment may cause radio interference during operation.

[Recycling symbol] Elements of packaging: Separate and dispose of in the recycling bin.

[Recycling symbol] This device and its accessories can be recycled. Dispose of at a collection point or recycling center.

Prefer repair or donation of your device!

Find collection points at www.quefairedemesdechets.fr

NCC Notice & BSMI Notice

NCC Notice: Unauthorized alteration of frequency, increase in power, or change of original design characteristics and functions of low-power radio frequency devices is prohibited. Low-power radio frequency devices must not affect flight safety or interfere with legal communications. If interference is found, the device must be stopped immediately and improved until no interference occurs before continuing use.

BSMI Notice: Legal communications refer to radio communications operated in accordance with telecommunications management regulations. Low-power radio frequency devices must tolerate interference from legal communications or industrial, scientific, and medical equipment. Avoid interfering with radar systems. High-gain directional antennas are only permitted for fixed point-to-point systems.

Electromagnetic Wave Impact: Please use appropriately to reduce electromagnetic wave impact.

MPE Value: The MPE standard value is 0.45 mW/cm². The tested product value is 0.0966 mW/cm². It is recommended to maintain a distance of at least 20 cm between the device antenna and the human body when in use.

BSMI Notice (Safety Consultations and Precautions)

• Use only the original power adapter or a power adapter of the type specified for this product.
• Unplug the power cord before cleaning the product. Do not use liquid, spray cleaners, or damp cloths for cleaning.
• Be cautious of moisture. Do not splash water or other liquids onto the product.
• Slots and openings are provided for ventilation to ensure reliable operation and prevent overheating. Do not block or cover these openings.
• Do not place the product near heat sources. Do not place it in a confined space without adequate ventilation.
• Do not disassemble or repair the product yourself. If the product malfunctions, contact the manufacturer or agent.
• The power adapter should be used indoors where the ambient temperature is 40°C or lower.
• Warning: To avoid electromagnetic interference, this product should not be installed or used in residential environments.

Restricted Substances Content Declaration

This table indicates the presence of restricted substances in the product components.

Notes:

1. "Exceeds 0.1 wt %" and "Exceeds 0.01 wt %" refer to the percentage content of the restricted substance exceeding the reference percentage level.

2. "⚪" indicates that the percentage content of the restricted substance does not exceed the reference percentage level.

3. "—" indicates that the restricted substance is excluded.

Ukrainian Certification

The product is certified in accordance with the system of UkrSEPRO for compliance with the requirements of regulatory documents and current legislative acts of Ukraine.

Safety Information

• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
• Do not use the device where wireless devices are not allowed.
• Do not use a damaged charger or USB cable to charge the device.
• Do not use any other chargers than those recommended.
• The adapter shall be installed near the equipment and shall be easily accessible.
• Keep the device away from fire or hot environments. DO NOT immerse in water or any other liquid.
• The adapter should be used indoors where the ambient temperature is lower than or equal to 40°C.
• The operating temperature for the device shall be within -30°C to 60°C.
• This product uses radios and other components that emit electromagnetic fields. Electromagnetic fields and magnets may interfere with pacemakers and other implanted medical devices. Always keep the product and its power adapter more than 15 cm (6 inches) away from any pacemakers or other implanted medical devices. If you suspect your product is interfering with your pacemaker or any other implanted medical device, turn off your product and consult your physician for information specific to your medical device.

Please read and follow the above safety information when operating the device. TP-Link cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

Product Label Symbols Explanation

Note: The product label can be found at the bottom of the product and its I.T.E. power supply. Symbols may vary from products.

General Symbol Explanations

• Alternating current: ~
• Direct current: ---
• Polarity of d.c. power connector: +--
• For indoor use only: ?
• Dangerous voltage: ⚡
• Caution, risk of electric shock: ⚠️
• Energy efficiency Marking: VI
• Protective earth: ⏚
• Earth: ⏚
• Frame or chassis: ⏚
• Functional earthing: ⏚
• Caution, hot surface: ⚠️
• Caution: ⚠️
• Operator's manual: ?
• Stand-by: ⏀
• "ON"/"OFF" (push-push): ⏀
• Fuse: ⏚
• Fuse is used in neutral N: N⏚
• RECYCLING: ♻️
• This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.
• Caution, avoid listening at high volume levels for long periods: ⚠️
• Disconnection, all power plugs: ?
• Switch of mini-gap construction: Switch of mini-gap construction
• Switch of micro-gap construction (for US version): Switch of micro-gap construction (for US version)
• Switch of micro-gap / micro-disconnection construction (for other versions except US): Switch of micro-gap / micro-disconnection construction (for other versions except US)
• Switch without contact gap (Semiconductor switching device): Switch without contact gap (Semiconductor switching device)