ℹ️ Document Conversion Notice: This document has been converted from PDF and formatted to fit this screen. Diagrams and images may be available only in the original here.

AcraDyne A Division of AIMCO

QUALITY • INNOVATION • SERVICE

Gen4 ACE Platform Release Notes

Release Notes SysREL 2R25

Added: "Increment on NOK" to Additional Options in the JOBS menu
Smart Arm: Added Firmware Version to list of info parameters. Supported after Smart Arm Accessory Firmware Versions 01.02 and greater
Added: support for Tohnichi CEM type Wrenches to the iBC when set to Tohnichi Type
Added: Serial Diagnostics to Diagnostics capabilities
Added: command error "Parameter set cannot be selected" to MID 18 of Open Protocol communications
AC_TCOMP: Added Peak Torque Tare option to Torque Compensation Strategy
VW XML Protocol: Added two more nodes (TNR and TAP) to the fastening report

Google Docs
Google Drive
Download [pdf]

File Info : application/pdf, 1 Pages, 506.61KB

Release Notes - SysREL 2R25 Adobe PDF Library 25.1.51

Related Documents

	AcraDyne Gen IV ACE Controller Firmware Upgrade Instructions Step-by-step guide for upgrading the AcraDyne Gen IV ACE Controller firmware, including software version history and upgrade procedures.
	AcraDyne ACE Controller Defect Service Bulletin SB00046 AcraDyne Service Bulletin SB00046 addresses an intermittent fastening defect in ACE Controller software versions 1R25_BETA_6, 1R25, and 1R25.1, providing instructions for updating to the 2R25 release.
	AcraDyne Gen IV Controller Modbus TCP Configuration Guide This guide provides instructions for configuring and utilizing the Modbus TCP communication protocol with the AcraDyne Gen IV Controller, detailing input/output addressing, supported functions, and configuration parameters for industrial automation.
	AcraDyne Gen IV IBC Controller Operation Manual This operation manual provides detailed instructions and specifications for the AcraDyne Gen IV IBC Controller, covering setup, operation, troubleshooting, and maintenance.
	AcraDyne Gen IV Controller Serial Port Instructions Detailed instructions for configuring and using the serial port on the AcraDyne Gen IV Controller, covering port modes, data formats, baud rates, and pin-out configurations for industrial applications.
	AcraDyne Gen IV iBC Controller Operation Manual Comprehensive operation manual for the AcraDyne Gen IV iBC Controller, detailing setup, configuration, operation, diagnostics, and troubleshooting for industrial fastening applications.
	AcraDyne Gen IV IEC Controller Operation Manual This operation manual provides detailed instructions and specifications for the AcraDyne Gen IV IEC Controller, covering setup, operation, diagnostics, and troubleshooting.
	AcraDyne HTXD Series Pistol Handle Nutrunner Assembly Instructions and Specifications Detailed assembly instructions, part list, and specifications for the AcraDyne HTXD series pistol handle nutrunner with slipring clutch and fan kit (Model: AEP4W9Y17000B).