FiberHome SR1041Y Wireless Router User Manual

Version: A

Product Overview

Name: SR1041Y

Function:

Ethernet interface: 3
USB interface: 1
Wi-Fi wireless access (2.4GHz, 5GHz)

Product Specifications

Power adapter input: 220V AC, 50Hz
Overall power supply: Refer to equipment nameplate
Working temperature: -10°C to 50°C
Storage temperature: -20°C to 70°C
Ambient humidity: 10% to 95% (Non-condensing)
Dimension (L×W×H): 205*127*35.1mm
Overall Power Consumption: < 9W
Mount-to-wall Hole Distance: 100mm

Note: The product series, functions, and specifications listed in this manual are provided as-is. The actual product shall prevail. This manual is intended for reference only.

Indicator LEDs

Internet status LED (Green): ON: Normal Internet access. OFF: No Internet access. Blinking: Internet interface connected with data transmission.
Power LED (Green): ON: Device normally powered. OFF: Device not powered on.
WLAN status LED (Green): ON: WLAN enabled. OFF: WLAN disabled. Blinking: WLAN interface connected with data transmission.
WPS status LED (Green): ON: WPS action successful. Blinking: WPS action in progress. OFF: WPS action disabled.
USB Status LED (Green): ON: USB port connected (no data transmission). Blinking: USB port connected with data transmission. OFF: USB port disconnected.
Ethernet interface status (Green): ON: Ethernet interface connected without data transmission. Blinking: Ethernet interface connected with data transmission. OFF: Ethernet interface disconnected.
WAN status LED (Green): ON: Normal WAN access. OFF: No WAN access. Blinking: WAN interface connected with data transmission.

Diagram: Illustration of all indicator LEDs of the SR1041Y equipment. The provided practical sample shows prevail.

Connection and Use

Step 1: Set up connections as indicated in the figure.

Diagram: Shows connections for power adapter, network cable to router ports (WAN, LAN1/2/3), and to computer. Also shows connection to Internet interface and portable storage device to USB port.

Step 2: Press the On/Off button. The Power status LED should be ON.

Step 3: Enable the Wi-Fi function of the SR1041Y and the client terminal. Search for your wireless network name and enter the correct password (refer to the label on the back of the device for SSID and password) to access the wireless network.

Reset button: Press and hold for less than 5 seconds to reset the device. Press and hold for 10 seconds or longer to restore to factory default.

WPS button: Press to enable wireless code function.

Desk top mounting: Place the device on a stable desktop.

Wall mounting: Drill two holes for mounting screws according to the mounting hole distance list in product specification. Insert screws and slide the device down until it fits snugly into the wall-mount slots.

Advanced Settings

The SR1041Y supports wireless functions. SSID and password settings can be configured.

Step 1: Set up connections as indicated in the figure.

Diagram: Shows connections for power adapter to power port, network cable to LAN1/2/3 port, and to computer.

Step 2: Press the On/Off button. The Power LED indicator should be ON.

Step 3: Set your PC to obtain an IP address automatically.

Step 4: Open a web browser and enter http://192.168.XX.XX (Management IP address on the bottom shell label) in the address bar.

Step 5: Enter the username and password from the bottom shell label in the login window and click Login to access the web configuration GUI.

Step 6: Configure WiFi on the corresponding page.

Caution: This operation is optional. You can use the default configuration before delivery.

FAQS

FAQ1: Why all the indicators are off?

Check the connection between the power adapter and the power socket.
Check whether the power switch is turned on.

FAQ2: Why the WLAN indicator is not on?

Check whether the WLAN function has been enabled.

FAQ3: Why the internet indicator is not on?

Check whether the device is connected to the internet.

FAQ4: Why the LAN indicator is not on?

Check the connection between the device and the PC, hub, or STB.
Check the running status of the computer, hub, or STB.

FAQ5: Why the web configuration page of the device fails to be accessed?

Choose Start->Run from the PC. Enter ping 192.168.1.1 (the default IP address of the device) in the DOS window. If the web configuration page still cannot be accessed, check the following configuration:
- The type of network cable.
- The connection between the device and the computer.
- The TCP/IP properties of the network card of the computer.

FAQ6: Why the computer is unable to access the internet?

Verify whether the network interface is connected normally via the network cable. If not, reconnect the network interface. Check whether the WLAN function of the computer is enabled. Check whether the SSID name and the password are correct.
If proxy server settings of the browsers (e.g., IE) are enabled, please disable these functions.
Check whether the computer has been set to obtain the IP address automatically.
Check whether the internet LED is normal.
Contact the service provider to check if the internet device quantity exceeds the limit set by the service provider.

Safety Precautions

Installation and usage:

Install the equipment in a well-ventilated environment without high temperatures or direct sunlight.
Avoid moisture, dampness, and water damage.
Do not lay the equipment on an unsteady base. Ensure it is firmly secured if placed at high places or hung on a wall.
Do not place heavy objects on the equipment and avoid violent collision.
Use only the provided power supply adapter.
Ensure the electrical load capacity of the socket and cables meets the equipment's requirement.
Power off the equipment during lightning storms and disconnect all cables.
If the equipment is not used for a long period, shut off the power supply and unplug the power cable.
Do not wash the equipment with water. Shut off power and unplug the cable before cleaning.
Do not touch wires and cables with wet hands.
Do not use benzene, ethyl alcohol, or gasoline to clean the equipment.

Warranty

Warranty Description:

FiberHome offers a 12-month warranty from the date of invoice for products purchased from authorized dealers, excluding man-made causes.

Warranty does not cover:

Damage or malfunction caused by transporting, loading, and unloading.
Damage or malfunction caused by man-made reasons (e.g., opening or remodeling the machine).
Damage or malfunction caused by unsatisfactory environment.
Damage or malfunction caused by force majeure incidents (e.g., fire, earthquake, lightning strike, war).
Damage or malfunction caused by failure to operate and maintain in accordance with the user's manual.
Damage of external parts (e.g., equipment enclosure, power connector).
Inconsistency of the Warranty Card and the product serial number, or alteration of the warranty card.

Paid repair and maintenance services are available for products beyond the warranty scope.

Subscriber Information:

Customer Name:
Address / Zip Code:
Phone:
Email:
Product Model: SR1041Y
Serial Number:
Date of Purchase:
Invoice Number:
Dealer Name:
Dealer Address:
Dealer Phone:

Please keep this card properly. No reissuance if lost.

Legal Notice & Disclaimer

The manual copyright belongs to FiberHome Telecommunication Technologies Co., Ltd. This manual cannot be excerpted or reproduced without prior written permission.

Disclaimer:

FiberHome assumes no responsibility for damages caused by natural disasters beyond its scope of liability.
FiberHome assumes no responsibility for damages such as profit, reputation, or data loss, and any special, unexpected, indirect, or associated damages caused by the usage of the product and manual.
FiberHome does not provide guarantees or technical support for information, material, files, or other services obtained through this product.
The manual content is provided as-is, with no express or implied warranties for accuracy or reliability.

FCC Statement

This device complies with part 15 of the FCC rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

Important Note: Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. It should be installed and operated with a minimum distance of 20cm between the radiator and your body.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

FCC CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

	FiberHome SR1021E Wireless Router User Manual User manual for the FiberHome SR1021E Wireless Router, covering installation, safety precautions, specifications, indicator lights, connection setup, FAQs, warranty information, and FCC compliance.
	FiberHome SR1041F Wireless Router User Manual User manual for the FiberHome SR1041F Wireless Router, covering installation, operation, safety precautions, product specifications, and troubleshooting.
	FiberHome SR1041D Wireless Router User Manual User manual for the FiberHome SR1041D Wireless Router, covering installation, safety precautions, product overview, specifications, LED indicators, warranty information, and troubleshooting.
	FiberHome SR120-CC Smart Router: Setup, Warranty, and Compliance Guide Comprehensive guide for the FiberHome SR120-CC Smart Router, covering packing, safety, installation, configuration, warranty information, and FCC/Canada regulatory compliance.
	FiberHome SR1021D Smart Router User Manual Comprehensive guide to setting up and using the FiberHome SR1021D Smart Router, including packing list, safety precautions, installation instructions, and warranty information.
	FiberHome HG6245Y GPON ONU Labeling and Placement Guide This document provides detailed specifications and placement instructions for the labeling of the FiberHome HG6245Y GPON ONU device, including material, size, color, printing rules, and physical performance tests for the labels. It also includes diagrams for label placement on the device, color box, collective box, and pallet.
	FiberHome AN6000-15 Optical Line Terminal Equipment Quick Installation Guide A comprehensive guide for the quick installation of the FiberHome AN6000-15 Optical Line Terminal Equipment, covering safety precautions, installation procedures, cable connections, and post-installation checks.
	FiberHome HG6244C GPON Optical Network Unit Product Manual This comprehensive product manual for the FiberHome HG6244C GPON Optical Network Unit (ONT) details its features, specifications, web configuration, and troubleshooting. It's designed for FTTH deployments, providing integrated data, voice, and video services.