Xiaomi Mi Electric Scooter 1S and Pro 2 User Manual

Introduction

Illustrations of product, accessories, and user interface in the user manual are for reference purposes only. Actual product and functions may vary due to product enhancements.

Mi Electric Scooter 1S

Mi Electric Scooter Pro 2

User Manual

Original instructions

Model Numbers: DDHBC11NEB, DDHBC05NEB, DDHBC08NEB

Compliance Mark: CE [CE Mark]

Document Reference: K010P0527-A0

01 Package Contents

• EN User Manual
• EN Important Information
• EN Specifications
• EN Extension Nozzle
• EN T-shape Allen Key
• EN Screw
• EN Power Adapter
• EN Tire

02 Assembly and Set-Up

1. Fold the handlebar stem up, fasten it, and put down the kickstand [Kickstand].
2. Install the handlebar onto the stem [Handlebar].
3. Tighten the screws onto both sides of the stem with the T-shaped Allen key [Allen Key].

03 Charge Your Scooter

The scooter is fully charged when the LED on the charger changes from red (charging) to green (trickle charge) [Charger LED].

1. Lift up the rubber flap [Rubber Flap].
2. Plug the power adapter into the charging port [Charging Port].
3. Unplug when charging is completed.
4. Put back the rubber flap [Rubber Flap].

04 Connect with Mi Home / Xiaomi Home App

Note: The version of the app might have been updated, please follow the instructions based on the current app version.

1. The scooter without being activated will keep beeping when turned on, and its speed is limited to 10 km/h.
2. Scan the QR code [QR Code] to download and install the app.
3. Open Mi Home / Xiaomi Home app [App Icon].
4. Tap "+" on the upper right, and then follow prompts to add your device.
5. Follow the on-screen instructions in the app to activate your scooter for the first use.
6. The beeping sound will not stop until the scooter is activated.

* The app is referred to as Xiaomi Home app in Europe (except for Russia). The name of the app displayed on your device should be taken as the default.

05 How To Ride

1. Warning: Wear a helmet, elbow pads and knee pads [Safety Gear].
2. Step on the deck with one foot, and slowly kick off the other on the ground.
3. The accelerator engages once the coasting speed exceeds 5 km/h [Speedometer].
4. Release the accelerator and squeeze the brake lever [Brake Lever] for a sudden brake.
5. Tilt your body to the steering direction as you turn, and slowly turn the handlebar [Handlebar].
6. Put down the kickstand [Kickstand] when parking.

06 Safety Reminder

General Safety:

• Always steer clear of obstacles [Obstacle Warning].
• Do not ride in traffic lanes or residential areas where vehicles and pedestrians are both allowed [Traffic Warning].
• Avoid hitting your head on door frames, elevators, and other overhead obstacles [Overhead Obstacle Warning].
• Do not press the accelerator when you're walking alongside the scooter.
• Do not hang bags or other heavy stuff on the handlebar.
• Do not ride on one foot.

Riding on Uneven Surfaces:

• Keep your speed between 5-10 km/h when you ride through speed bumps, elevator door stills, bumpy roads or other uneven surfaces.
• Slightly bend your knee to better adjust to mentioned surfaces.

High-Speed Maneuvers:

• Do not abruptly change the steering direction at high speed.

07 Additional Safety Precautions

Riding Conditions:

• Do not accelerate when going downhill, and brake in time to slow down. When encountering a steep incline, you need to step off the scooter and push.
• Do not use mobile phone or wear earphones when operating the scooter.
• Do not ride in the rain. Do not ride through puddles or any other water obstacles.
• Do not ride with anyone else, including children.

Prohibited Actions:

• Do not keep your feet on the rear mudguard.
• Do not touch the disc brake [Disc Brake].
• Do not let go of the handlebar while riding.
• Do not try riding up or down stairs, nor try jumping over obstacles.

08 Folding and Carrying

1. Hold the handlebar stem [Handlebar Stem], turn it counterclockwise to open the safety hook and open the quick release lever [Quick Release Lever].
2. Align the bell and the buckle [Buckle] and hook them.
3. Hold the handlebar stem with either one hand or both hands to carry.
4. Disengage the bell lever from the buckle on the mudguard.

08 Adjusting the Disc Brake

Brake Cable Adjustment:

Before adjustment, make sure the scooter is powered off and not charging. If the brake is too tight/loose, use the 4 mm Allen key [Allen Key] to loosen the screw on the caliper [Caliper]. Then slightly adjust the brake line (decrease/increase the exposed length), and tighten the screw again.

Tire Valve Stem:

1. Unscrew the valve cap [Valve Cap].
2. Connect the extension nozzle [Extension Nozzle] to the tire valve stem.
3. Connect the pump [Pump] to inflate the tire.

09 Lock Your Scooter

Lock: The scooter motor will be locked and the headlight will be turned off automatically. An icon will be displayed in the control panel [Control Panel Icon].

Unlock: Reverses the lock function.

Set Password

Tap here > "More Settings" > "Set password".

Note: If no password is set, the scooter can be unlocked by the Mi Home/Xiaomi Home app from any phone. Set the password in the app as soon as possible. In case you forget the password, please go to www.mi.com or contact the after-sales department for help.

Importer Information

Importer: Beryko s.r.o.

Address: Na Roudné 1162/76, 301 00 Plzeň

Website: www.beryko.cz