Saramonic WiTalk System: Full-Duplex Wireless Intercom Headset System

Statement

Please read this manual carefully before using the products and strictly operate & store it in accordance with the instructions. Please save the manual for your future reference. If you need further assistance than the user manual, please consult your retailer for help or email us: info@saramonic.com.

Introduction

The WiTalk series is a full-duplex wireless intercom headset system that offers two-way communication at a range of up to 400 meters (1312 ft). The WiTalk system is ideal for applications where teams need full use of their hands, such as filmmaking, sports events, production crew communication, etc. It mainly includes the following products:

• WiTalk HUB: A mini base station with two operating channels, capable of working with eight Remote headsets simultaneously. Its 3.5mm headphone & microphone combo jack can be connected to the WiTalk LBH (monaural intercom headset), creating a nine-person talk net.
• WiTalk DMH (Dual-Ear Master Headset) and WiTalk SMH (Single-Ear Master Headset): Can be used with four Remote headsets, allowing up to 5 people to communicate simultaneously.
• WiTalk DRH (Dual-Ear Remote Headset) and WiTalk SRH (Single-Ear Remote Headset): Can be paired with any kind of master headset or base station.
• WiTalk CB: A battery charger that can charge up to 10 batteries at the same time.

Product Structure

WiTalk DRH: Dual-Ear Remote Headset

Diagram of WiTalk DRH (Dual-Ear Remote Headset) showing numbered components: 1. Microphone 2. Status Indicator 3. Power Button (press and hold to power on or off) 4. Volume Control (+/- button) (press "+" or "-" button to increase or decrease the volume) 5. Mute Button (indicator blinks red when muted, static blue when not muted) 6. Release Button 7. Battery Compartment 8. USB-C Charging Port 9. Charging Indicator

WiTalk DMH: Dual-Ear Master Headset

Diagram of WiTalk DMH (Dual-Ear Master Headset) showing numbered components: 1. Microphone 2. Status Indicator 3. Power Button (press and hold to power on or off) 4. Volume Control (+/- button) (press "+" or "-" button to increase or decrease the volume) 5. Mute Button (indicator blinks red when muted, static blue when not muted) 6. Release Button 7. Battery Compartment 8. USB-C Charging Port 9. Charging Indicator

WiTalk SMH: Single-Ear Master Headset

Diagram of WiTalk SMH (Single-Ear Master Headset) showing numbered components: 1. Microphone 2. Status Indicator 3. Power Button (press and hold to power on/off) 4. Volume Control (+/- button) (press "+" or "-" button to increase or decrease the volume) 5. Mute Button (indicator blinks red when muted, static blue when not muted) 6. Release Button 7. Battery Compartment 8. USB-C Charging Port 9. Charging Indicator

WiTalk SRH: Single-Ear Remote Headset

Diagram of WiTalk SRH (Single-Ear Remote Headset) showing numbered components: 1. Microphone 2. Status Indicator 3. Power Button (press and hold to power on/off) 4. Volume Control (+/- button) (press "+" or "-" button to increase or decrease the volume) 5. Mute Button (indicator blinks red when muted, static blue when not muted) 6. Release Button 7. Battery Compartment 8. USB-C Charging Port 9. Charging Indicator

WiTalk HUB: Mini Base Station

Diagram of WiTalk HUB (Mini Base Station) showing numbered components: 1. Pairing Indicator 2. Pair Buttons of Channel A and Channel B 3. Volume Control Knob 4. Power Indicator 5. Power Button (press and hold to power on/off) 6. Belt Clip 7. Battery Compartment 8. Release Button 9. 3.5mm Headphone & Microphone Combo Jack 10. Link Jack 11. USB-C Charging Port 12. Charging Indicator

WiTalk LBH: Monaural Intercom Headset

Diagram of WiTalk LBH (Monaural Intercom Headset) showing numbered components: 1. Microphone 2. Audio Connector (3.5mm TRRS cable)

How to Use WiTalk LBH: Connect the headset to the 3.5mm jack of WiTalk HUB.

Microphone Adjustment: Adjust the boom and position the microphone capsule at about 2cm in front of your mouth for optimum audio.

WiTalk CB: 10-Bay Battery Charger

Diagram of WiTalk CB (10-Bay Battery Charger) showing numbered components: 1. Battery Slots 2. Charging Indicators 3. DC Jack 4. 12V/2.5A DC Adapter (Includes four types of detachable plug adapters: Europlug, American Standard, British Standard, Chinese Standard)

Operation Guide

How to Wear WiTalk DMH/DRH/SMH/SRH/LBH

1. Put on the headset and adjust it to a comfortable size and position.

Headsets Pairing

Before leaving the factory, the WiTalk system is pre-paired. Therefore, the connection will be established once they are powered on. If they are disconnected, please follow the below steps:

1. Make sure that the Master headset and Remote headset(s) are powered off.
2. When the Master headset is in shutdown mode, press and hold its "+" button and power button simultaneously for about 3 seconds to enter pairing mode. The indicator will blink blue rapidly.
3. When the Remote headset is in shutdown mode, press and hold its "+" button and power button simultaneously for about 3 seconds to enter pairing mode. The indicator will blink blue rapidly. Do this for all Remote headsets in turn.
4. When the Master headset and the Remote headset(s) have entered the pairing mode, and the indicator of the Remote headset(s) turns to slowly blink blue, press the power button of the Master headset. They will be successfully paired within 10 seconds, and the indicators of both will turn to static blue.

Notes on Headset Pairing:

• Each Master headset can have a maximum of four Remote headsets paired.
• When the number of Remote headsets reaches four, the Master headset has reached its maximum pairing number by default. Pairing will be successful without the fourth step.
• If the Master headset cannot enter pairing mode, it will automatically turn on after its indicator blinks red rapidly for 5 seconds. This indicates the Master headset has reached its maximum pairing number. To re-enable pairing mode, clear the Master headset first.
• Master and Remote headsets of single-ear and dual-ear types can be paired. The pairing method is the same as described above.

Status Indicator for Pairing:

Mini Base Station Pairing

1. Make sure that the WiTalk HUB and the Remote headset are powered off.
2. When the WiTalk HUB is in shutdown mode, press and hold its pair button (A or B) and power button simultaneously for about 3 seconds. The indicator will blink blue rapidly, and then the corresponding channel (A or B) enters pairing mode.
3. When the Remote headset is in shutdown mode, press and hold its "+" button and power button simultaneously for about 3 seconds to enter pairing mode. The indicator will blink blue rapidly. Do this for all Remote headsets in turn.
4. When the WiTalk HUB and the Remote headset(s) have entered pairing mode, and the indicator of the Remote headset(s) turns to slowly blink blue, press the power button of the WiTalk HUB. They will be successfully paired within 10 seconds, and the indicators of both will turn to static blue.

Notes on WiTalk HUB Pairing:

• Each channel can have a maximum of 4 Remote headsets paired. Thus, the WiTalk HUB can work with up to 8 Remote headsets simultaneously.
• After channel A is paired, if necessary, repeat the above steps to pair channel B.

Status Indicator for WiTalk HUB Pairing: (Same as headset pairing: Unpaired - Blinking blue slowly, Paring - Blinking blue quickly, Paired Successfully - Static blue)

Clearing the Master Headset

When pairing with a repaired or replaced unit, the Master headset needs to be cleared before a Remote headset can be paired. Follow the steps below to clear the Master headset:

1. Make sure the Master headset is powered off.
2. Press and hold the Master headset's power button and "-" button simultaneously for 10 seconds until its indicator blinks red and blue alternately. When the indicator turns off, the Master headset is cleared.

Clearing the WiTalk HUB

When pairing with a repaired or replaced unit, the WiTalk HUB needs to be cleared before a Remote headset can be paired. Follow the steps below to clear the WiTalk HUB:

1. Make sure the WiTalk HUB is powered off.
2. Press and hold the WiTalk HUB's pair button A and power button simultaneously for 10 seconds. After channel A's indicator blinks blue rapidly for 3 seconds, channel A is cleared and channel B still works normally.
3. Press and hold the WiTalk HUB's pair button B and power button simultaneously for 10 seconds. After channel B's indicator blinks blue rapidly for 3 seconds, channel B is cleared and then the WiTalk HUB will automatically shut down.

Battery Charging

Please recharge the device when the battery is low.

1. Charge the battery via the charger: Press the release button to remove the battery. Insert the battery into the charger and make sure the contacts are properly aligned.
2. Charge the battery via a USB-C charging cable: Connect the USB-C cable to the headset or charger.

Charging Indicator Status:

How to Mute WiTalk DMH/DRH/SMH/SRH/LBH

The boom can swivel over the top 270 degrees, thus the headset can be worn on both sides.

You can mute/unmute the microphone in the following two ways:

• Mute: Set the boom to the "UP" position.
• Unmute: Set the boom to the "Vertical" position.
• Alternatively, press the MIC/MUTE button to mute or unmute the microphone. (Indicator blinks red when Mute ON, static blue when Mute OFF).

Expanding the System

The system is expandable by adding more WiTalk HUBs. Use a 3.5mm TRRS to TRRS adapter cable (sold separately) to connect one WiTalk HUB's link jack to another WiTalk HUB's headphone & microphone combo jack, doubling capacity to 16 full-duplex headsets.

Specifications

Dual-Ear Master Headset (WiTalk DMH)

Dual-Ear Remote Headset (WiTalk DRH)

Single-Ear Master Headset (WiTalk SMH)

Mini Base Station (WiTalk HUB)

Single-Ear Remote Headset (WiTalk SRH)

Standards for Radio Frequency Band

For the latest frequency band and more countries, please refer to our official website: www.saramonic.com.

Packing List

The following items are included in the WiTalk system kits:

• WiTalk DMH Dual-Ear Master Headset
• WiTalk DRH Dual-Ear Remote Headset
• WiTalk SMH Single-Ear Master Headset
• WiTalk SRH Single-Ear Remote Headset
• WiTalk LBH Monaural Intercom Headset
• WiTalk HUB Mini Base Station
• WiTalk CB Battery Charger
• WiTalk BP Rechargeable Battery
• WiTalk Link Cable-30M (sold separately)
• WiTalk Carrying Case (S/M/L)

Product Kits

Saramonic offers various WiTalk system kits:

• WiTalk WT2D: 1x WiTalk DMH Headset, 1x WiTalk DRH Headset, 2x WiTalk BP Battery, 2x USB-C Charging Cable, 1x WiTalk Carrying Case (S)
• WiTalk WT2S: 1x WiTalk SMH Headset, 1x WiTalk SRH Headset, 2x WiTalk BP Battery, 2x USB-C Charging Cable, 1x WiTalk Carrying Case (S)
• WiTalk WT3D: 1x WiTalk DMH Headset, 2x WiTalk DRH Headset, 3x WiTalk BP Battery, 3x USB-C Charging Cable, 1x WiTalk Carrying Case (S)
• WiTalk WT3S: 1x WiTalk SMH Headset, 2x WiTalk SRH Headset, 3x WiTalk BP Battery, 3x USB-C Charging Cable, 1x WiTalk Carrying Case (S)
• WiTalk WT4D: 1x WiTalk DMH Headset, 3x WiTalk DRH Headset, 4x WiTalk BP Battery, 4x USB-C Charging Cable, 1x WiTalk Carrying Case (S)
• WiTalk WT4S: 1x WiTalk SMH Headset, 3x WiTalk SRH Headset, 4x WiTalk BP Battery, 4x USB-C Charging Cable, 1x WiTalk Carrying Case (S)
• WiTalk WT5D: 1x WiTalk DMH Headset, 4x WiTalk DRH Headset, 5x WiTalk BP Battery, 1x WiTalk CB Battery Charger, 1x WiTalk Carrying Case (M)
• WiTalk WT5S: 1x WiTalk SMH Headset, 4x WiTalk SRH Headset, 5x WiTalk BP Battery, 1x WiTalk CB Battery Charger, 1x WiTalk Carrying Case (M)
• WiTalk WT6D: 1x WiTalk HUB Base Station, 5x WiTalk DRH Headset, 6x WiTalk BP Battery, 1x WiTalk CB Battery Charger, 1x WiTalk LBH Headset, 1x WiTalk Carrying Case (M)
• WiTalk WT6S: 1x WiTalk HUB Base Station, 5x WiTalk SRH Headset, 6x WiTalk BP Battery, 1x WiTalk CB Battery Charger, 1x WiTalk LBH Headset, 1x WiTalk Carrying Case (M)
• WiTalk WT7D: 1x WiTalk HUB Base Station, 6x WiTalk DRH Headset, 7x WiTalk BP Battery, 1x WiTalk CB Battery Charger, 1x WiTalk LBH Headset, 1x WiTalk Carrying Case (L)
• WiTalk WT7S: 1x WiTalk HUB Base Station, 6x WiTalk SRH Headset, 7x WiTalk BP Battery, 1x WiTalk CB Battery Charger, 1x WiTalk LBH Headset, 1x WiTalk Carrying Case (L)
• WiTalk WT8D: 1x WiTalk HUB Base Station, 7x WiTalk DRH Headset, 8x WiTalk BP Battery, 1x WiTalk CB Battery Charger, 1x WiTalk LBH Headset, 1x WiTalk Carrying Case (L)
• WiTalk WT8S: 1x WiTalk HUB Base Station, 7x WiTalk SRH Headset, 8x WiTalk BP Battery, 1x WiTalk CB Battery Charger, 1x WiTalk LBH Headset, 1x WiTalk Carrying Case (L)
• WiTalk WT9D: 1x WiTalk HUB Base Station, 8x WiTalk DRH Headset, 9x WiTalk BP Battery, 1x WiTalk CB Battery Charger, 1x WiTalk LBH Headset, 1x WiTalk Carrying Case (L)
• WiTalk WT9S: 1x WiTalk HUB Base Station, 8x WiTalk SRH Headset, 9x WiTalk BP Battery, 1x WiTalk CB Battery Charger, 1x WiTalk LBH Headset, 1x WiTalk Carrying Case (L)

Recommendations and Contact

For a better recording experience, the application SmartRecorder is recommended.

Scan the QR code and follow us on WeChat!

Company: Shenzhen Jiayz Photo Industrial., Ltd

Address: A16 Building, Intelligent Terminal Industrial Park of Silicon Valley Power, Guanlan, Longhua District, Shenzhen, China

Phone: 400-613-1096

Website: www.saramonic.com

Email: info@saramonic.com