Jabra Evolve 80 Quick Start Guide
How to Connect
Connect to PC (with controller): Fully plug the headset into the controller, and connect the controller to a USB port on the PC. Only use the controller supplied with the Jabra Evolve 80.
Diagram Description: Shows a USB-A connector and a USB-C connector, both connecting to a controller, which then connects to a PC.
Connect to Mobile Device (without controller): Plug the headset directly into your mobile device.
How to Wear
It is recommended to position the microphone close to your mouth (2 cm). The microphone is bendable for personal preference.
When listening to music or when outdoors, the microphone can be stored in the headband groove.
Fold-flat storage: The earcups can be folded-flat for easy storage. The microphone must be removed from the headband groove and swiveled backwards before folding the earcups flat.
Diagram Description: Shows the headset earcups being folded flat for storage, with an indication to move the microphone.
How to Use
The headset features the following controls:
- Microphone: Bendable for positioning.
- Mute button: For muting/unmuting the microphone.
- Volume up/down buttons: To adjust speaker volume.
- Answer/end call button: To answer/end calls or open Microsoft Teams notifications (on compatible variants).
- Busylight button: To control the Busylight indicator.
- Listen-in button: To allow ambient sound into the headset when ANC is active.
- Active Noise Cancellation (ANC) switch: To turn ANC on/off.
- Busylight indicator: Visual indicator for call status.
- USB/charging port: For charging the headset.
- Battery indicator: Shows battery status.
Function Actions
Function | Action |
---|---|
Answer/end call | Tap the Answer/end button |
Open Microsoft Teams notification* | Tap the Answer/end button |
Reject call | Double-tap the Answer/end button |
Adjust speaker volume | Tap the Volume up or Volume down button |
Busylight | Tap the Busylight button |
Mute/unmute microphone | Tap the Mute button, or swivel the microphone up (mute) or down (un-mute) |
Active Noise Cancellation (ANC) | Slide the Active Noise Cancellation switch on/off. ANC reduces outside disturbance. |
Listen-in | Tap the Listen-in button (ANC must be on). Listen-in lets outside sound into the headset. |
Charging the Headset
Normal use of the headset when connected to the controller will charge the battery. The headset will also charge when connected via USB cable.
It takes approximately 3 hours to fully charge.
*Requires Microsoft Teams headset variant.