ℹ️ Document Conversion Notice:
This document has been converted from PDF and formatted to fit this screen. Diagrams and images may be available only in the original here.
RacksBrax Bundutec Compatibility Pocket Guide
Fast On! Fast Off!
BUNDUTEC® BUNDUAWN 360 HYBRID (CUSTOM)
Sizes: 2.45m, 2.95m
Bundutec awning spines (back plate) have no mounting channels or drilled holes for brackets or hitches. These need to be drilled to suit brackets or hitches using the Bundutec Fitment Sheet.
HITCHES
Required minimum for fast on, fast off!
Mounting Points
Hitches Needed
3
9001 – XD Hitch (TRIPLE)
BRACKETS
Optional
Mounting Points
Brackets Needed
3
For bars or platform styles with transverse slats (with no perimeter lip): 9101 - XD Adjustable Brackets Short (TRIPLE)*; OR 9105 - XD Side Twist Bracket Short Foot (TRIPLE)*.
For platform styles with longitudinal slats (with no perimeter lip): 9103 – XD Adjustable Brackets Long (TRIPLE)*; OR 9107 - XD Side Twist Bracket Long Foot (TRIPLE)*.
*Roof racks with perimeter lips require packers to fit RacksBrax brackets (sold separately). Refer to the Roof Rack Guide for more information on racks with perimeter lips.
WALL MOUNTS
Optional
Benefits: Allows you to remove your roof rack accessory from your vehicle so that it can be fixed to a wall when not in use.
Secured Location:
✔️ LOCKED GARAGES
✔️ WORKSHOP WALLS
Unsecured Location:
✔️ OPEN CARPORTS
✔️ PUBLIC/SHARED GARAGE AREA
Mounts:
9010 – XD Wall Mounts+
9011 – XD Lockable Wall Mounts+
+Note: You cannot use Wall Mounts to mount anything to the vehicle – these are for static wall use ONLY.
BUNDUTEC® BUNDUAWN HALF WING (4-ARM)
Sizes: 2.45m (AU & US only)
Bundutec awning spines (back plate) have no mounting channels or drilled holes for brackets or hitches. These need to be drilled to suit brackets or hitches using the Bundutec Fitment Sheet.
HITCHES
Required minimum for fast on, fast off!
Mounting Points
Hitches Needed
3
9001 – XD Hitch (TRIPLE)
BRACKETS
Optional
Mounting Points
Brackets Needed
3
For bars or platform styles with transverse slats (with no perimeter lip): 9101 - XD Adjustable Brackets Short (TRIPLE)*; OR 9105 - XD Side Twist Bracket Short Foot (TRIPLE)*.
For platform styles with longitudinal slats (with no perimeter lip): 9103 – XD Adjustable Brackets Long (TRIPLE)*; OR 9107 - XD Side Twist Bracket Long Foot (TRIPLE)*.
*Roof racks with perimeter lips require packers to fit RacksBrax brackets (sold separately). Refer to the Roof Rack Guide for more information on racks with perimeter lips.
WALL MOUNTS
Optional
Benefits: Allows you to remove your roof rack accessory from your vehicle so that it can be fixed to a wall when not in use.
Secured Location:
✔️ LOCKED GARAGES
✔️ WORKSHOP WALLS
Unsecured Location:
✔️ OPEN CARPORTS
✔️ PUBLIC/SHARED GARAGE AREA
Mounts:
9010 – XD Wall Mounts+
9011 – XD Lockable Wall Mounts+
+Note: You cannot use Wall Mounts to mount anything to the vehicle – these are for static wall use ONLY.
BUNDUTEC® BUNDUAWN L-SHAPE 270 (SQUARE BACK)
Sizes: 2.45m, 2.75m
Bundutec awning spines (back plate) have no mounting channels or drilled holes for brackets or hitches. These need to be drilled to suit brackets or hitches using the Bundutec Fitment Sheet.
HITCHES
Required minimum for fast on, fast off!
Mounting Points
Hitches Needed
3
9001 – XD Hitch (TRIPLE)
BRACKETS
Optional
Mounting Points
Brackets Needed
3
For bars or platform styles with transverse slats (with no perimeter lip): 9101 - XD Adjustable Brackets Short (TRIPLE)*; OR 9105 - XD Side Twist Bracket Short Foot (TRIPLE)*.
For platform styles with longitudinal slats (with no perimeter lip): 9103 – XD Adjustable Brackets Long (TRIPLE)*; OR 9107 - XD Side Twist Bracket Long Foot (TRIPLE)*.
*Roof racks with perimeter lips require packers to fit RacksBrax brackets (sold separately). Refer to the Roof Rack Guide for more information on racks with perimeter lips.
WALL MOUNTS
Optional
Benefits: Allows you to remove your roof rack accessory from your vehicle so that it can be fixed to a wall when not in use.
Secured Location:
✔️ LOCKED GARAGES
✔️ WORKSHOP WALLS
Unsecured Location:
✔️ OPEN CARPORTS
✔️ PUBLIC/SHARED GARAGE AREA
Mounts:
9010 – XD Wall Mounts+
9011 – XD Lockable Wall Mounts+
+Note: You cannot use Wall Mounts to mount anything to the vehicle – these are for static wall use ONLY.
BUNDUTEC® BUNDUAWN L-SHAPE 270 2.45m, 2.95m
Sizes: 2.45m, 2.95m
Bundutec awning spines (back plate) have no mounting channels or drilled holes for brackets or hitches. These need to be drilled to suit brackets or hitches using the Bundutec Fitment Sheet.
HITCHES
Required minimum for fast on, fast off!
Mounting Points
Hitches Needed
3
9001 – XD Hitch (TRIPLE)
BRACKETS
Optional
Mounting Points
Brackets Needed
3
For bars or platform styles with transverse slats (with no perimeter lip): 9101 - XD Adjustable Brackets Short (TRIPLE)*; OR 9105 - XD Side Twist Bracket Short Foot (TRIPLE)*.
For platform styles with longitudinal slats (with no perimeter lip): 9103 – XD Adjustable Brackets Long (TRIPLE)*; OR 9107 - XD Side Twist Bracket Long Foot (TRIPLE)*.
*Roof racks with perimeter lips require packers to fit RacksBrax brackets (sold separately). Refer to the Roof Rack Guide for more information on racks with perimeter lips.
WALL MOUNTS
Optional
Benefits: Allows you to remove your roof rack accessory from your vehicle so that it can be fixed to a wall when not in use.
Secured Location:
✔️ LOCKED GARAGES
✔️ WORKSHOP WALLS
Unsecured Location:
✔️ OPEN CARPORTS
✔️ PUBLIC/SHARED GARAGE AREA
Mounts:
9010 – XD Wall Mounts+
9011 – XD Lockable Wall Mounts+
+Note: You cannot use Wall Mounts to mount anything to the vehicle – these are for static wall use ONLY.
BUNDUTEC® BUNDUAWN STANDARD 360
Sizes: 2.45m, 2.95m
Bundutec awning spines (back plate) have no mounting channels or drilled holes for brackets or hitches. These need to be drilled to suit brackets or hitches using the Bundutec Fitment Sheet.
HITCHES
Required minimum for fast on, fast off!
Mounting Points
Hitches Needed
3
9001 – XD Hitch (TRIPLE)
BRACKETS
Optional
Mounting Points
Brackets Needed
3
For bars or platform styles with transverse slats (with no perimeter lip): 9101 - XD Adjustable Brackets Short (TRIPLE)*; OR 9105 - XD Side Twist Bracket Short Foot (TRIPLE)*.
For platform styles with longitudinal slats (with no perimeter lip): 9103 – XD Adjustable Brackets Long (TRIPLE)*; OR 9107 - XD Side Twist Bracket Long Foot (TRIPLE)*.
*Roof racks with perimeter lips require packers to fit RacksBrax brackets (sold separately). Refer to the Roof Rack Guide for more information on racks with perimeter lips.
WALL MOUNTS
Optional
Benefits: Allows you to remove your roof rack accessory from your vehicle so that it can be fixed to a wall when not in use.
Secured Location:
✔️ LOCKED GARAGES
✔️ WORKSHOP WALLS
Unsecured Location:
✔️ OPEN CARPORTS
✔️ PUBLIC/SHARED GARAGE AREA
Mounts:
9010 – XD Wall Mounts+
9011 – XD Lockable Wall Mounts+
+Note: You cannot use Wall Mounts to mount anything to the vehicle – these are for static wall use ONLY.
Models: 2.45m, 2.95m, BUNDUTEC Awning and Accessory, BUNDUTEC, Awning and Accessory, Awning, Accessory
RacksBrax Outback Tourer Awning & Accessory Compatibility Guide Comprehensive compatibility guide for RacksBrax Outback Tourer awnings and accessories, detailing hitch and bracket requirements, and wall mount options. Includes models like the 180, 270, 270 Plus, and Shower Awning.
RacksBrax Compatibility Guide for The Bush Company Awnings This guide provides detailed compatibility information for RacksBrax mounting systems with various awning models from The Bush Company, including specific part numbers for hitches, brackets, and wall mounts.
