RACKS BRAX
COMPATIBILITY POCKET GUIDE
FOR DRIFTA STOCKTON
FAST ON! FAST OFF!
AWNING AND ACCESSORY MODELS
Select an awning/accessory below to find out what you need:
- DRIFTA® STOCKTON 180 FREESTANDING AWNING (Page 3)
- DRIFTA® STOCKTON 270 FREESTANDING AWNING (Page 4)
- DRIFTA® STOCKTON 270 HEAVY DUTY FREESTANDING AWNING with LED lights (Page 5)
- DRIFTA® STOCKTON SIDE AWNING 2.0m, 2.5m (Page 6)
DRIFTA® STOCKTON 180 FREESTANDING AWNING
HITCHES
REQUIRED MINIMUM FOR FAST ON, FAST OFF!
Mounting Points: 2
Hitches Needed: 9000 – XD Hitch (DOUBLE)*
*Will also work with the triple version.
BRACKETS OPTIONAL
Mounting Points: 2
Brackets Needed:
- For bars or platform styles with transverse slats (with no perimeter lip)
- For platform styles with longitudinal slats (with no perimeter lip)
Supplied brackets from Drifta® will work with the XD Hitch range.
- 9100 – XD Adjustable Brackets Short (DOUBLE)*; OR
- 9104 - XD Side Twist Bracket Short Foot (DOUBLE)*.
- 9102 – XD Adjustable Brackets Long (DOUBLE)*; OR
- 9106 – XD Side Twist Bracket Long Foot (DOUBLE)*.
*Roof racks with perimeter lips require PACKERS to fit RacksBrax brackets (sold separately). Refer to Roof Rack Guide for more information on racks with perimeter lips.
WALL MOUNTS OPTIONAL
Benefits: Allows you to remove your roof rack accessory from your vehicle so that it can be fixed to a wall when not in use.
Secured Location:
- ✔️ Locked Garages
- ✔️ Workshop Walls
9010 - XD Wall Mounts+
Unsecured Location:
- ✔️ Open Carports
- ✔️ Public/Shared Garage Area
9011 - XD Lockable Wall Mounts+
+*Note: You cannot use Wall Mounts to mount anything to the vehicle – these are for static wall use ONLY.
DRIFTA® STOCKTON 270 FREESTANDING AWNING
HITCHES
REQUIRED MINIMUM FOR FAST ON, FAST OFF!
Mounting Points: 3
Hitches Needed: 8182 - HD Hitch (TRIPLE)
BRACKETS OPTIONAL
Mounting Points: 3
Brackets Needed:
- For bars or platform styles with transverse slats (with no perimeter lip)
- For platform styles with longitudinal slats (with no perimeter lip)
Supplied brackets from Drifta® require 1 x 8.5MM hole to be drilled per bracket to achieve 2 bracket holes at 50MM centres.
- 8305 - HD Adjustable Brackets Short (TRIPLE)*; OR
- 8307 - HD Adjustable Brackets Long (TRIPLE)*.
*Roof racks with perimeter lips require PACKERS to fit RacksBrax brackets (sold separately). Refer to Roof Rack Guide for more information on racks with perimeter lips.
WALL MOUNTS OPTIONAL
Benefits: Allows you to remove your roof rack accessory from your vehicle so that it can be fixed to a wall when not in use.
Secured Location:
- ✔️ Locked Garages
- ✔️ Workshop Walls
8160 - HD Wall Mounts+
Unsecured Location:
- ✔️ Open Carports
- ✔️ Public/Shared Garage Area
8161 - HD Lockable Wall Mounts+
+*Note: You cannot use Wall Mounts to mount anything to the vehicle – these are for static wall use ONLY.
DRIFTA® STOCKTON 270 HEAVY DUTY FREESTANDING AWNING with LED lights
HITCHES
REQUIRED MINIMUM FOR FAST ON, FAST OFF!
Mounting Points: 3
Hitches Needed: 9001 – XD Hitch (TRIPLE)
BRACKETS OPTIONAL
Mounting Points: 3
Brackets Needed:
- For bars or platform styles with transverse slats (with no perimeter lip)
- For platform styles with longitudinal slats (with no perimeter lip)
Supplied brackets from Drifta® must use either of one of 2 pairs of vertical holes.
- The XD body will fit the upper and lower holes in the Drifta bracket.
- The XD holder will fit the upper and lower mounting tracks in the Drifta awning spine.
- 9101 - XD Adjustable Brackets Short (TRIPLE)*; OR
- 9105 - XD Side Twist Bracket Short Foot (TRIPLE)*.
- 9103 – XD Adjustable Brackets Long (TRIPLE)*; OR
- 9107 - XD Side Twist Bracket Long Foot (TRIPLE)*.
*Roof racks with perimeter lips require PACKERS to fit RacksBrax brackets (sold separately). Refer to Roof Rack Guide for more information on racks with perimeter lips.
WALL MOUNTS OPTIONAL
Benefits: Allows you to remove your roof rack accessory from your vehicle so that it can be fixed to a wall when not in use.
Secured Location:
- ✔️ Locked Garages
- ✔️ Workshop Walls
9010 - XD Wall Mounts+
Unsecured Location:
- ✔️ Open Carports
- ✔️ Public/Shared Garage Area
9011 - XD Lockable Wall Mounts+
+*Note: You cannot use Wall Mounts to mount anything to the vehicle – these are for static wall use ONLY.
DRIFTA® STOCKTON SIDE AWNING 2.0m, 2.5m
HITCHES
REQUIRED MINIMUM FOR FAST ON, FAST OFF!
Mounting Points: 2
Hitches Needed: 8159 - HD Hitch Standard*
Also Works With: 8162*, 8180*
*Will also work with the triple versions.
BRACKETS OPTIONAL
Mounting Points: 2
Brackets Needed:
- For bars or platform styles with transverse slats (with no perimeter lip)
- For platform styles with longitudinal slats (with no perimeter lip)
Supplied brackets from Drifta® will work with the HD Hitch range.
- 8300 - HD L50 L Brackets (DOUBLE)*; OR
- 8304 - HD Adjustable Brackets Short (DOUBLE)*; OR
- 8300 - HD L50 L Brackets (DOUBLE)*; OR
- 8306 - HD Adjustable Brackets Long (DOUBLE)*.
*Roof racks with perimeter lips require PACKERS to fit RacksBrax brackets (sold separately). Refer to Roof Rack Guide for more information on racks with perimeter lips.
WALL MOUNTS OPTIONAL
Benefits: Allows you to remove your roof rack accessory from your vehicle so that it can be fixed to a wall when not in use.
Secured Location:
- ✔️ Locked Garages
- ✔️ Workshop Walls
8160 - HD Wall Mounts+
Unsecured Location:
- ✔️ Open Carports
- ✔️ Public/Shared Garage Area
8161 - HD Lockable Wall Mounts+
+*Note: You cannot use Wall Mounts to mount anything to the vehicle – these are for static wall use ONLY.
Related Documents
 |
RacksBrax Drifta Stockton Awning Compatibility Guide | Vehicle Accessories Find the correct RacksBrax hitches, brackets, and wall mounts for your Drifta Stockton 180, 270, and Side awnings. Includes model numbers and compatibility information. |
 |
RacksBrax Outback Tourer Awning & Accessory Compatibility Guide Comprehensive compatibility guide for RacksBrax Outback Tourer awnings and accessories, detailing hitch and bracket requirements, and wall mount options. Includes models like the 180, 270, 270 Plus, and Shower Awning. |
 |
RacksBrax Compatibility Pocket Guide for Camp King Industries Awnings A concise guide detailing RacksBrax compatibility for Camp King Industries Protector Series Freestanding 270 2.3m awnings, including hitch, bracket, and wall mount options. |
 |
RacksBrax Bundutec Awning Compatibility Pocket Guide Comprehensive compatibility guide for RacksBrax and Bundutec awnings, detailing hitch and bracket options, and wall mount solutions for various Bundutec awning models. |
 |
RacksBrax Dune 4WD Awning Compatibility Pocket Guide Comprehensive compatibility guide for RacksBrax Dune 4WD awnings, detailing hitch, bracket, and wall mount options for various models including 270°, 270° Ultimate, and Ensuite versions. |
 |
RacksBrax Compatibility Pocket Guide for James Baroud Awnings A concise guide detailing RacksBrax compatibility for James Baroud 270 and 270 Frontier awnings, including necessary hitches, brackets, and wall mounts. |
 |
RacksBrax Compatibility Guide for The Bush Company Awnings This guide provides detailed compatibility information for RacksBrax mounting systems with various awning models from The Bush Company, including specific part numbers for hitches, brackets, and wall mounts. |
 |
RacksBrax Howling Moon Awning Compatibility Pocket Guide A concise compatibility guide from RacksBrax for Howling Moon awnings, detailing hitch, bracket, and wall mount specifications for various models. |