Product Description
This is a metal fan designed with three different speed settings and a horizontal adjustability of 90 degrees.
Figure 1: Depicts the metal fan, showcasing its construction with a protective grille, motor housing, and a stable stand.
Figure 2: Illustrates the fan's operation. The top row shows the fan plugged into a power outlet and operating at various speed levels (0, 1, 2, 3). The bottom row demonstrates the fan's tilt adjustment for changing the vertical angle.
Technical Data
Voltage | 230 V ~ 50 Hz |
Power | 120 W |
Cord length | 1.5 m |
Weight | 4.6 kg |
Dimensions | H55 x W53.5 x D19.5 cm |
Operation
To operate the fan, ensure it is fully assembled. Connect the power plug to a suitable electrical outlet. The fan has three speed settings, which can be adjusted as needed. The fan head can also be tilted to direct airflow.
Maintenance
- Always switch off the product and unplug it from the power outlet before cleaning. Wait for all moving parts to stop completely.
- Clean the product with a soft cloth moistened with a mild cleaning agent.
- Never immerse the product in water or any other liquid.
- Do not use petrol or chemicals for cleaning.
- Do not expose fan blades or other plastic parts to water hotter than 60°C.
- Store the product in a dry place if it is not going to be used for an extended period.
- After assembly, the protective grille should not be removed during use or cleaning.
Technical Specifications
Description | Designation | Value | Unit |
---|---|---|---|
Maximum air speed | F | 84.2 | m³/min |
Input power of fan | P | 89.6 | W |
Service value | Sv | 0.9 | (m³/min)/W |
Power consumption in standby mode | PSB | 0 | W |
Sound power level | LwA | 65 | dB(A) |
Maximum flow speed | C | 3.8 | m/s |
Service value standard: EN ISO 5801:2017, EN 60879:2017
Contact details: www.jula.com
Safety Instructions
WARNING: Follow these instructions to reduce the risk of burns, fire, electric shock, or personal injury.
- Ensure mains voltage matches the appliance's rating.
- Do not use with speed controllers.
- Children aged 8+ and persons with reduced capabilities may use under supervision. Keep children away from the appliance and do not allow them to clean or maintain it unsupervised.
- Never leave the appliance unattended when switched on.
- If the power cord is damaged, it must be replaced by the manufacturer, service agent, or similarly qualified personnel.
- Do not remove guards during use or cleaning after assembly.
- Do not attempt self-repair; contact an authorized electrician or service center.
- Keep the appliance, cord, and plug away from water and liquids.
- Do not use near water sources (bath, shower, pool).
- Do not install near heat sources (radiators, cookers).
- Avoid high temperatures, direct sunlight, shocks, continuous vibration, and dusty environments.
- Ensure adequate ventilation; do not place in cupboards or on shelves.
- Place on a stable, level surface.
- Switch off and unplug before assembly, disassembly, or cleaning. Do not operate until fully assembled.
- Avoid contact with moving parts; do not insert objects into openings.
- Do not cover or place near curtains/furniture to prevent fire risk.
- This appliance is for household use only.
- Wait for all moving parts to stop completely before moving the appliance.
- Use only manufacturer-recommended accessories.
- Ensure the appliance is stable before operation.
- Do not immerse the appliance in water or other liquids.