OMRON FH-5050 High-Speed Vision Controller

Product Overview

The OMRON FH-5050 is a high-speed and high-performance controller designed for machine automation vision applications. It is equipped with a powerful 4-core Intel® Core™ i7 processor and 8 GB of RAM (non-ECC), enabling advanced processing capabilities.

The controller supports up to 2 cameras and offers a variety of communication interfaces, including EtherCAT Slave, EtherNet/IP, Ethernet TCP/IP, PROFINET Slave, Serial RS-232C, and USB. The output type is PNP/NPN.

Key Features and Applications

• Processor: Intel® Core™ i7
• Memory: 8 GB RAM (non-ECC)
• Cameras Supported: 2
• Al Capabilities: Al Scratch detection filter, Al FineMatching
• Communication Ports: EtherCAT Slave, EtherNet/IP, Ethernet TCP/IP, PROFINET Slave, Serial RS-232C, USB
• Applications: 2D Robot guidance, 3D Bin picking, Al fine matching, Al scratch detection, Bead inspection, Code reading, Code verification, Color inspection, Counting, Defect inspection, Measurement inspection, OCR / OCV, Presence / Absence detection.

Specifications Summary

Compatible Products and Accessories

Fits to

• FH-SMDA-GS050B: FH 3D camera, FOV 400x300x200 mm, WD 500 mm, 24 V

Accessories

• Vision System Monitors: FH-MT12 (12-inch touch panel monitor)
• Al Filter: FH-UMAI1 (USB license key dongle)
• Cables: FH-VMDA 2M/5M (Monitor DVI-RGB), FH-VUAB 2M/5M (USB touch panel), XW2Z-200EE (Parallel I/O for terminal block), XW2Z-S013-2/5 (Parallel I/O for FH series)
• Mounting Bracket: FH-XDM-L (DIN rail mounting bracket)
• Junction Modules: GX-JC03 (3-port EtherCAT), GX-JC06 (6-port EtherCAT)
• Memory Cards: HMC-SD292 (2 GB SD), HMC-SD492 (4 GB SD)
• Network Switch: W4S1-05D (5-port enhanced Ethernet switch)

Downloads

A variety of resources are available for download, including:

• CAD Library
• Operation Manuals: 3D Robot Vision AOS Camera Calibration
• Connection Guides: FH Series 3D Vision System (various robot controllers including ABB, Nachi-Fujikoshi, Yaskawa, TM-series, Viper Series, Denso RC8A, FANUC R-30iB Mate), CJ-series -[EtherNet/IP]- FH-series Vision System, NJ-series -[EtherNet/IP]- FH-series Vision System, NJ/CJ-series / Siemens S7-1500 -[PROFINET]- FH-series+FHV7-series
• Setup Manuals: FH Series - PROFINET Setup Manual
• Datasheets: FH-series Vision System Datasheet, Maxell CR-series HR Battery Safety Datasheet
• Application Guides: FH/FHV Vision Application Guide for ABB robots, Denso robots, Fanuc robots, Omron robots, Epson robots
• Software: FH/FHV Launcher V631/V640, FH-Sim Installation V631/V640
• Brochures: Xpectia FH Brochure, Selection Guide for Vision Sensors
• Utility Files: Omron FH-xxxx-xx PROFINET GSDML file

Terms of Website Use

This PDF document was created from the European OMRON Industrial Automation website on 28 August, 2022. Click here for terms of use.