Maxpower MPD1025XB-GLOW 10 User Manual

Important Safety Measures

• Protection of electric power supply line: Ensure the power cord is not trampled or pressed by heavy objects. Pay special attention to the plug and machine outlet. Do not lengthen, pull, or drag the power supply line.
• Ventilation: Place the unit in a ventilated area, away from obstructions like disks or cloth. Maintain at least 10 cm distance from walls. Avoid placing on soft surfaces like beds or carpets that could impede ventilation.
• Casing Dismantling: Do not dismantle the casing. Touching inner components can cause serious electric shock.
• Unusual smell: If unusual smell or smoke is detected, immediately cut power supplies, unplug from the wall outlet, and contact the seller or a repair center.

Attention: This set applies to DC 9V power supply. Use a standard power supply. Ensure correct power supply before use.

Product Features

• Wireless connectivity
• Plays songs stored in external audio devices
• Microphone inputs
• Wireless microphone included
• Includes remote control
• Built-in rechargeable battery
• Super dynamic sound speaker

Remote Control Functions

A remote control is included for convenient operation. The buttons include:

• Standby: Powers the unit on/off.
• LINE (Audio input): Selects Line audio input mode.
• Prev/FM CH-: Navigates to the previous track or decreases FM channel.
• Play/pause/FM tuner: Plays/pauses music or scans for FM stations.
• Next/FM CH+: Navigates to the next track or increases FM channel.
• Repeat: Repeats the current track or folder.
• Stop: Stops playback.
• Volume up: Increases the master volume.
• Volume down: Decreases the master volume.
• Mute: Mutes/unmutes the audio output.
• Wireless disconnect: Disconnects from the Bluetooth device.
• Number buttons: For direct track selection or input.

Panel Function Instruction

The unit features various ports and controls:

• MODE: Selects input mode (e.g., Bluetooth, AUX, FM, Card).
• PREVIOUS: Selects the previous track or FM channel.
• SCAN/TWS: Plays/pauses music, initiates TWS pairing, or automatically searches for FM stations.
• NEXT: Selects the next track or FM channel.
• REC: Records audio when a card is inserted. Press again to stop and play recording.
• M.PRI: Microphone Priority On/Off switch.
• BASS: Adjusts bass effect (press and hold).
• LED MODE ADJUSTMENT: Controls LED lighting modes.
• AUX IN: Audio input jack for connecting external devices via cable.
• CARD SLOT: Slot for inserting memory cards (e.g., TF card, SD card) for playback.
• VOLUME: Master volume adjustment.
• MIC VOL: Microphone volume adjustment.
• ECHO: Adjusts echo effect for microphone input (press and hold).
• BATTERY CHARGE INDICATING LIGHT: Shows the charging status of the battery.
• DC9V IN: DC 9V charging input port.
• MIC IN: Microphone input jack for connecting wired microphones.
• POWER ON/OFF SWITCH: Long press to turn the unit on or off.
• EQUALIZER: Adjusts sound equalization settings.

Battery & Charging

1. The unit takes approximately 8 hours to fully charge. Charging begins automatically when the power cord is connected.
2. If battery power is low, it may cause sound distortion or playback interruption. Please charge the battery promptly.
3. To maximize battery lifespan, charge the battery immediately if depleted. When the unit is not used for extended periods, the battery will gradually lose power. It is recommended to fully charge the battery at least every 30 days.
4. To save battery, power off the unit when not in use.

How to Connect to BT

When the speaker is turned on, the display will read "OPEN", indicating it is ready to connect. On your smart device, search for Bluetooth devices. Select "MPD1025XB-GLOW 10" from the list to establish a connection.

TWS Connection (How to Pair Two Speakers)

To pair two speakers for True Wireless Stereo (TWS) sound:

1. Bring the two speakers close to each other and turn both on. The display on both speakers should read "OPEN".
2. On the primary speaker, press and hold the TWS button for 3 seconds. The primary speaker will emit an alarm sound, and its display will show "BTST".
3. The second speaker will automatically connect to the primary speaker. The display on the secondary speaker will show "BT".
4. You can now connect your smart device via Bluetooth to the primary speaker and enjoy music from both speakers simultaneously.

FCC Compliance Information

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.