Maxpower MPD1530-XB Professional Speaker User Manual

Important Safety Measures

Before using this machine, please read all the safety and operating instructions, meanwhile, please observe all the indications about safe operating. These safety and operating instructions should be kept in condition of consultation.

1. Protection of electric power supply line: Ensure the electric power supply line is not trampled or pressed by heavy objects. Pay special attention to the power supply line plug and the outlet on the machine. DO NOT create electric shock hazards, DO NOT pull or drag the power supply line.
2. Ventilation: This set must be placed in a ventilated area. DO NOT place objects on it or cover it with cloth. Maintain a distance of at least 10 centimeters from walls. DO NOT place this set on beds, sofas, carpets, or other similar surfaces that may obstruct ventilation.
3. Casing Dismantling: DO NOT dismantle the casing. Touching inner components may result in serious electric shock.
4. Unusual smell: If you detect an unusual smell or smoke, immediately cut off power supplies and unplug the unit from the wall outlet. Contact the seller or the nearest repair center.

Attention: This set is designed for AC 110V/50Hz~60Hz power supply. Use a standard power supply. Please ensure the correct power supply is used before operation.

Product Features

• Wireless connectivity
• Plays songs stored in external audio devices
• Guitar input
• Microphone inputs
• Wireless microphone included
• Includes remote control
• Built-in rechargeable battery
• Super dynamic sound speaker
• X-Bass feature for powerful sound

Remote Control

The remote control provides the following functions:

• Standby
• LINE (Audio input selection)
• Prev/FM CH-
• Play/pause/FM tuner
• Next/FM CH+
• Repeat
• Stop
• Volume up
• Volume down
• Mute
• Equalizer
• Number pad (0-9)

Connecting

1. This set is designed for AC 110V, 50/60Hz power input.
2. AC Power: The battery can be charged when connected to AC power. A red light indicates the battery is charging; it turns green once charging is complete.
3. The internal battery will charge even if the device is switched off when plugged into AC power.
4. The speaker battery can also be charged using a 12V external car battery (connect cable not included) via the "DC 12V input". Please ensure correct connection of the "+" and "-" terminals.
5. Adjust function keys to suit your personal audio preferences.

Battery & Charging

1. The unit takes approximately 8 hours to fully charge. Charging begins automatically once the power cord is connected.
2. If the battery power is low, it may cause sound distortion or stop playback; please charge the battery on time.
3. To maximize the battery's lifespan, please charge the battery immediately. When the unit is not used for prolonged periods, the battery will gradually lose its power. It is recommended to fully charge the battery at least every 30 days.
4. To conserve battery, please power off the unit when you stop using it.

How to Connect to BT (Bluetooth)

When you turn on the speaker, the display will read "OPEN", indicating your speaker is ready to connect. Go to your smart device and search for Bluetooth devices. You will see the device name "MPD1530-XB"; please select it to connect.

TWS Connection - How to Pair Two Speakers

To pair two speakers:

1. Bring two speakers next to each other and turn on both speakers. Both speakers' displays should read "OPEN".
2. On the first speaker (primary speaker), press and hold the TWS button for 3 seconds. The primary speaker will sound an alert, and the display will show "BTST".
3. The second speaker will automatically connect to the primary speaker. The display of the secondary speaker will show "BT".
4. Now you may connect to Bluetooth from your smart device and listen to music from both speakers.

Panel Function Instruction

The speaker panel includes the following controls and inputs:

• MIC.VOL: Microphone Volume Adjustment Knob.
• MODE: Selects the operating mode.
• REPEAT KEY: Sets the repeat playback mode.
• REC: Recording function. Insert a card and press this button to start recording. Press again to stop and play the recorded sound.
• DC 12V INPUT: Jack for connecting a 12V DC external power source.
• AUDIO INPUT: Line audio input jack.
• M.PRI: Microphone Priority On/Off Switch. When enabled, microphone audio will automatically lower the music volume.
• GT.IN: Guitar Input Jack.
• MIC.IN: Microphone Input Jack.
• MIC.TREBLE VOLUME KNOB: Increases or decreases the microphone treble.
• EQUALIZER: Adjusts the audio equalization settings.
• POWER ON/OFF SWITCH, RESET: Controls the power and resets the unit.
• DISPLAY SCREEN: Shows the current operating status.
• CARD INPUT: Slot for inserting memory cards (e.g., SD card).
• MIC.BASS VOLUME KNOB: Increases or decreases the microphone bass.
• MIC.MID VOLUME KNOB: Increases or decreases the microphone mid-range frequencies.
• SCAN/TWS: Plays/Pauses audio, initiates TWS pairing, or performs automatic FM station search.
• PREV: Selects the previous song or FM channel.
• NEXT: Selects the next song or FM channel.
• VOLUME: Master Volume Adjustment Knob.
• ECHO KNOB: Adjusts the echo effect for microphone input.
• X-BASS: Increases or decreases the X-Bass effect for enhanced low frequencies.
• BT DISCONNECT: Disconnects the current Bluetooth connection.
• LED MODE ADJUSTMENT: Controls the LED lighting modes.
• GT. VOLUME: Guitar Volume Adjustment Knob.

POWER INPUT (AC 110V-240V): Standard AC power input connection.

FM ANTENNA: Connection point for the FM antenna to receive radio signals.

FCC Compliance Information

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

FCC ID: 2BBFBMPD1530-XB

Made in China