Printing Instructions
Comments:
Folder: 2 pages, 2-sided print. Page size: 570 × 570 mm. Features 2 horizontal and 2 vertical folds (refer to folding illustrations). Size after folding: 190 × 190 mm. Title and barcodes are visible after folding.
Printing: Color printing.
Paper Quality: Thickness: 100 g/m². Finish: uncoated paper, natural/white color.
Important Note: Do not archive any files. You must download the files from Doc Exchange (Cisco's secure file sharing tool) for every printing. Remove this page before printing.
Product Overview
What's in the box
Visual representation of package contents:
- Cisco Room Bar Pro unit
- Mounting hardware (screws, brackets)
- Cables (e.g., 5m, 8m, 1.5m)
- Room Navigator (touch interface)
- Hex key [hex key]
Connector Panel
Diagram showing the rear panel with numbered ports:
- 1. Power: Power input.
- 2. HDMI out (primary screen): For connecting the main display.
- 3. HDMI in (content sharing): For sharing content from another device.
- 4. USB 2.0: Standard USB port.
- 5. USB-C: Supports passthrough and content sharing.
- 6. Network (Ethernet): Standard network connection.
- 7. Room Navigator (touch interface): For controlling the room system.
- 8. Network (Ethernet PoE): Power over Ethernet network connection.
- 9. Audio output: For external audio devices.
- 10. Audio input: For external microphones or audio sources.
- 11. Maintenance (micro USB): For service and maintenance.
- 12. Factory reset: Button to restore factory settings.
- 13. Kensington lock: Security slot.
Mounting Options
VESA Compatibility
Diagram illustrating VESA mounting standards and compatible screen sizes:
Supports VESA mounting patterns. Compatible with screens up to 100 inches. Specific VESA hole patterns mentioned include 200 mm x 200 mm, 400 mm x 400 mm, and smaller patterns (e.g., 75 mm x 75 mm, 100 mm x 100 mm, 200 mm x 100 mm, 400 mm x 200 mm) are indicated by bracket dimensions.
Note: Mounting options may vary depending on VESA mount and screen dimensions.
Screen Mounting
Illustrations show attaching L-brackets to the back of a display and mounting the device.
Process:
- Attach mounting brackets (e.g., L-brackets) to the back of the screen using provided screws (e.g., M6, M8).
- Use the screen's depth to determine the correct orientation for the L-bracket.
- Mount the Cisco Room Bar Pro unit onto the attached brackets.
Wall Mounting
Illustrations show attaching brackets to a wall and then mounting the device.
Process:
- Secure wall mounting brackets to the wall at the appropriate height and spacing.
- Mount the Cisco Room Bar Pro unit onto the wall brackets.
Important: Ensure the power socket outlet is easily accessible after installation.
Installation Steps
Step-by-step visual guide for installation:
- Step 1: Attach the appropriate mounting brackets to the screen or wall using the provided screws (e.g., M6, M8). Ensure correct screw length is used.
- Step 2: Determine the orientation of the L-bracket based on the screen's depth.
- Step 3: Center the main mounting bracket and tighten the bolts securely.
- Step 4: Attach the Cisco Room Bar Pro unit to the mounted bracket.
- Step 5: Connect necessary cables: Power, HDMI, Network, and Room Navigator.
- Step 6: Ensure the power socket outlet is easily accessible after installation.
- Step 7: Tighten all bolts and screws to secure the installation.
- Step 8: Before powering on the Cisco Room Bar Pro, ensure the front cover is correctly in place.
- Step 9: Manage any additional cables neatly.
- Step 10: Final check: Confirm the front cover is properly fitted before activating the device.
More Information
Visit the following websites for more details about your device:
Cisco Room Series - Cisco
RoomOS for Collab Devices
Contact Cisco - Cisco
