CYCLAMi CYC1600 Professional Cycling Headlight
Brand: CYCLAMi
Product Description
The CYCLAMi CYC1600 is a professional-grade cycling headlight designed for enhanced visibility and safety during rides. It features a powerful LED, multiple lighting modes, and a wireless remote control for convenient operation.
Product Contents
- Headlight
- Handle mount bracket
- GoPro conversion mount
- Remote control
- Bracket strap
- Gasket (28mm/32mm/35mm)
- Allen wrench (3mm/4mm)
- Type-C Cable
Lock Mode
To prevent accidental activation during transport or storage, the headlight features a lock mode. This is crucial to avoid potential damage from misoperation, high heat, or fire. The manufacturer is not responsible for damages resulting from failure to follow lock mode instructions.
- Enter Lock Mode: When powered off, quickly press the power button three times until the power indicator flashes red.
- Unlock Mode: When locked, quickly press the power button three times until the power indicator turns solid green.
Note: The product defaults to lock mode from the factory. Please unlock it before first use.
Installation
Headlight Installation
Diagram shows attaching the headlight to a handlebar mount using a gasket and a bracket.
- Install the conversion mount onto the handlebar mounting bracket.
- Select the suitable gasket to fit your handlebar.
- Install the handle mount bracket onto the handlebar.
- Insert the headlight into the bracket conversion mount at a 45° angle, then rotate it to align the light.
- Adjust the light angle so that the light does not shine directly on oncoming vehicles or pedestrians. Installation is complete.
Remote Control Installation
Diagram shows securing the remote control bracket to the handlebar with a strap.
- Choose a suitable position on the handlebar and fix the remote control bracket with the strap.
- Installation is finished.
Operating Instructions
Power Switch and Headlight Operation
The headlight features mode memory, defaulting to the last used lighting mode upon power-on.
- Switch On/Off: Long press the power button for 0.5 seconds.
- Switch Lighting Mode: When powered on, single-click the power button to cycle through brightness levels: High, Medium, Low, Slow Flash, Fast Flash.
- Switch Beam Modes: When powered on, double-click the power button to switch between Low Beam, High Beam, and High & Low Beam modes. Each beam mode has 5 brightness levels.
- Super Bright: When powered on, short-press the power button for the brightest output (High and Low beams simultaneously).
Note: The remote control cannot operate the light when it is in lock mode. Please pair the light with the remote control before use.
LUMENS / RUN TIME
| Mode | Brightness | Time | |
|---|---|---|---|
| Luminous (High & Low Beam Simultaneous) | 1600LM | 1H40M | |
| High, Low Beam Unilateral On Mode | High | 800LM | 3H |
| Medium | 400LM | 6H | |
| Low | 200LM | 11H | |
| Slow Flash | 0-400LM | 11H | |
| Fast Flash | 0-400LM | 11H |
The above data is obtained at a room temperature of 25°C and a wind speed of 25 km/h. Different temperatures and ventilation conditions may affect the data.
Battery Indicator
| Color | Remaining Power |
|---|---|
| Green | 80%-100% |
| Blue | 30%-80% |
| Red | <30% |
When Powered On: The power button flashes automatically every 3 seconds to indicate remaining power.
When Powered Off: Short press the power button to display the remaining power.
How to Recharge
Recharge the Light
- Open the USB waterproof plug on the side of the light and insert the charging cable into the Type-C port.
- Connect the other end of the charging cable to a charging device.
- Use a charger above 5V-2A for better charging results.
Recharge the Remote Control
- Open the USB waterproof plug on the back of the remote control and insert the charging cable into the Type-C port.
- Connect the other end of the charging cable to a charging device.
Charging Indicators:
- Charging: Steady red light.
- Fully Charged: Steady green light.
Note: For the first use, please fully charge the light and remote control. After charging, unplug the cable and ensure the USB waterproof plug is securely closed.
Precautions and Warnings
- Do not point the light head directly at your eyes when using it.
- Avoid touching the metal head when using the high brightness mode for extended periods.
- Do not allow children to use the product without adult supervision.
- Please charge at an ambient temperature between 5°C and 40°C.
- Before charging, check that the charging cable is in good condition.
- When charging, please use a 5V-2A USB power adapter.
- After charging, be sure to unplug the charging connector.
- Do not charge, discharge, or store the device in a high-temperature environment, as this will accelerate battery aging.
- Do not place the battery in a car or near a heat source.
- If the battery life gradually decreases after correct charging, it indicates the rechargeable battery has reached its effective service life. Replace the battery at a local service point and comply with local regulations for proper disposal of the discarded rechargeable battery.
- If the product is not in use, it needs to be charged once every 3 months to prevent battery damage and ensure usability.
- Please store the light in a cool and dry place after fully charging.
