AVerMedia EzRecorder 330 User Manual
Model: ER330
Introduction
The EzRecorder 330 (ER330) is a stand-alone, live stream capable capture box. It allows users to record video content or broadcast gameplay without the need for a computer.
Installation
- Connect A Video Source to ER330Diagram shows connecting a video source (e.g., game console) to the ER330 via HDMI or Composite inputs.
- Connect ER330 to Your TVDiagram shows connecting the ER330 to a television using an HDMI cable.
- Connect the IR Blaster Cable to A Set-top Box's IR Sensor (Optional)Diagram illustrates connecting the IR Blaster cable to the IR sensor port of a set-top box.
- Connect the Power AdapterDiagram shows the power adapter being plugged into the ER330's DC IN port and then into a wall electrical outlet.
5. Power on ER330Diagram shows the EzRecorder 330 device with its power button.
6. Check the Video on the TVTurn on your TV and ensure the content is displayed correctly.
Remote Control
The following table describes the functions of the keys on the remote control:
| # | Button | Function |
|---|---|---|
| 1 | POWER | Power On/Off |
| 2 | MENU | Access Menu |
| 3 | Arrow Keys & OK | Navigation and selection |
| 4 | T.REC | Timer Recording (use Up/Down Arrow keys to select time) |
| 5 | Record/stop recording | Start or stop recording |
| 6 | Stream/stop streaming | Start or stop live streaming |
| 7 | PLAY | Play recorded content |
| 8 | REW | Rewind at 2x, 4x, 8x, 16x, or 32x speed |
| 9 | PAGE- | Previous page |
| 10 | RECALL | Access last recorded file/image |
| 11 | SOURCE | Switch between HDMI and Composite inputs |
| 12 | INFO | Display information |
| 13 | BACK | Go back to previous screen |
| 14 | Instant Highlight | Record retroactively |
| 15 | Snapshot | Take a screenshot |
| 16 | PAUSE | Pause playback or recording |
| 17 | FF | Fast forward at 2x, 4x, 8x, 16x, or 32x speed |
| 18 | PAGE+ | Next page |
| 19 | DELETE | Delete files |
| 20 | STOP | Stop playback or recording |
| 21 | F1 | Remove storage device / Follow on-screen instruction |
| 22 | F2 | Follow on-screen instruction |
| 23 | F3 | Follow on-screen instruction |
LED Indications
The Power Indicator shows the status of the EzRecorder 330:
| Power Indicator | Function Type: Status |
|---|---|
| Flashing Blue | General: Booting/deleting/firmware updating |
| Solid Blue | General: Ready |
| Breathing Blue | Stream: Streaming |
| Flashing Red | Record: Processing |
| Solid Red | Record: Paused |
| Breathing Red | Errors: Storage full/no storage found/no video/protected content |
| Record: Recording | Record: Recording |
| Rapid Flashing Red | Record: Low storage space |
| Flashing Green | Instant Highlight: Processing |
| Breathing Green | Instant Highlight: Instant-highlighting |
| Solid Orange | General: Pass-through ON when powering OFF |
Specifications
| Interface | Standalone |
| Storage | microSD card/External USB 2.0 HDD/NAS |
| Video Input | HDMI/Composite |
| Video Output | HDMI |
| Audio Input | HDMI, RCA L/R, 3.5 mm Headset |
| Audio Output | HDMI |
| Max Pass-Through Resolutions | 4Kp60 |
| Max Recording Resolutions | 1080p60 |
| Supported Resolutions (Video Input) | 2160p, 1080p, 1080i, 720p, 576p, 576i, 480p, 480i |
| Record Format | MPEG 4 (H.264 + AAC) or (H.265 + AAC) |
| Net Connection | Ethernet (10 Base-T/100 Base-T) |
| Dimensions (W x D x H) | 135 * 71.2 * 28 mm (5.31 * 2.8 * 1.1 in) |
| Weight | 150 g (5.29 oz) |
Note: EzRecorder 330 does not support viewing/recording/streaming of HDCP-protected signals.
Storage Types
| Type | Specs |
|---|---|
| Solid State Drive (SSD) | Format: NTFS or exFAT Capacity: 500 GB or above recommended |
| SD Card | Compatible card: microSDXC Format: FAT32 or exFAT (recommended) Max. Capacity: 512 GB Speed: UHS-I Speed Class 3 (U3) A2 V30 or higher |
For more details on ER330's storage, visit our FAQ here.
Basic Operations
Setup Wizard
When you power on ER330 for the first time, you will be greeted by a Setup Wizard. The following steps will guide you through the initial configuration process.
- Selecting Language
When the welcome page appears, use the [Up/Down Arrow] keys to select your preferred language. Press [OK] to confirm.
Image shows the 'Welcome to EzRecorder 330' screen with language options including Deutsch, English, Español, Français. - HDMI Pass-Through
It is advised to turn HDMI pass-through ON.
Image shows the 'HDMI Pass Through' screen with 'On' and 'Off' options, recommending 'On'. - Setting Up Storage Device & Network
You can set up a storage device and network now or later. Only supports exFAT/NTFS format. Refer to the attachment for supported storage devices and capacities.
Image shows the 'Device Setup' screen, prompting to ensure an Ethernet cable is plugged in and a storage device is installed. - Finishing Setup Wizard
After the setup is completed, you can press the [INFO] button to view the basic settings.
Image shows the 'Setup Result' screen displaying network connection, date/time, and storage path.Image shows the 'Recording Mode/Input Signal' screen, displaying recording mode, video input, audio input, and storage destination.
Record
Video recording is one of the most essential functions of the EzRecorder 330. It provides two simple recording methods:
- Press the record button on the remote control; the ER330 will start recording. Press it again to stop the recording.
- Press the power button of the ER330 to start recording. Press it again to stop the recording.
H.264/H.265 Encoding
The ER330 provides H.264 and H.265 storage encodings. You can change this setting in Menu > Settings > Recording / Snapshot > Encoding Format.
Image shows the 'Encoding format' selection screen with options for H.264 and H.265, noting H.264 files offer good quality and compatibility.Snapshot
Press the Snapshot button on the remote control to take a screenshot.
View Images/Videos and Edit Videos
View Images/Videos
The recorded videos and screenshots can be viewed in Menu > Media Studio.
Image shows the 'Media Studio' interface listing recorded files and screenshots, with options for sorting, viewing, editing, and deleting.Edit Videos
Select a video you want in Media Studio and press [F3] to edit it.
Image shows an editing interface with options to search for scenes and start editing.Advanced Recording
NAS Recording
The EzRecorder 330 allows recording and storing directly to a NAS. Navigate to Menu > Settings > NAS Recording > Storage Location, then add your Location, Account, and Password, and enable NAS Recording.
Images show the 'NAS Recording' setup screen with options for storage location and recording settings, and the 'Enter network location and account password' screen.Note: A network connection is required for NAS Recording. The recommended speed is 10 Mbps.
Schedule Recording
The EzRecorder 330 allows you to set a specific time to start recording. It will automatically turn on your set-top box at the scheduled time and stop recording when the time is up. Go to Menu > Schedule List > [F1] to enter the start and end times for recording.
Images show the 'Add New Schedule' screen for setting start/end times and frequency, and the 'Schedule List' screen displaying planned recordings.Note: Before using this function, ensure the IR Blaster is installed and set up properly. The maximum recording length is 14 hours.
Timer Recording
The EzRecorder 330 also provides a Timer Recording function. This allows you to quickly record an ongoing TV program using its built-in timer, automatically stopping the recording when the timer is stopped.
Press the [T.REC] button on the remote. Use the [Left/Right Arrow] buttons to select between the hour and minute fields, and the [Up/Down Arrow] buttons to select their recording lengths. Then, press [OK] to start recording. The ER330 will record the video and stop at the set time.
Image shows the 'Timer Recording' setup screen with options for recording length and remaining time.Instant Highlight
The Instant Highlight function is used when no recording is in progress, and you want to record something that just happened. Before using this function, you need to enable Instant Highlight Mode in Menu > Settings > Instant Highlight.
You can set the recording length as needed. After enabling the function, the LED indicator will turn green, indicating that Instant Highlight is active. When you want to record, press the Record button on the remote, and the ER330 will save the video retroactively.
Images show the 'Instant Highlight Mode' setup screen and a processing screen indicating retroactive recording.Streaming
The EzRecorder 330 has a built-in live-streaming function that can broadcast directly to Twitch, Facebook, and YouTube. As long as your ER330 is connected to the Internet, you can livestream without a computer.
Binding Account
To bind an account, go to Menu > Settings > Streaming. Select a streaming platform (currently supports YouTube, Facebook, Twitch) you wish to stream on. Press [F1] to log in, and a QR CODE will appear on the screen.
Image shows a QR code for authentication.Scan the QR CODE with your smart device. Tap the provided link to go to the webpage and enter your platform account information. The webpage will then provide a 4-digit code.
Images show a mobile login page for Twitch and a screen displaying the authentication code '3916'.After entering the code in your ER330, the account will be successfully bound.
Images show screens related to entering the authentication code and the final binding status.Live Streaming
After binding a streaming platform, simply press the Stream button on the remote whenever you want to live stream.
Images show confirmation screens for starting a live stream.Press the Stream button again to stop the livestream.
Images show confirmation screens for stopping a live stream.Disclaimer
All pictures contained in this documentation are example images only. The images may vary depending on the product and software version. Information presented in this documentation has been carefully checked for reliability; however, no responsibility is assumed for inaccuracies. The information contained in this documentation is subject to change without notice.
Copyright and Trademark Information
© 2023 by AVerMedia Technologies, Inc. All rights reserved. No part of this publication, in whole or in part, may be reproduced, transmitted, transcribed, altered, or translated into any language in any form by any means without the written permission of AVerMedia Technologies, Inc. Information and specification contained in this manual are subject to change without notice and do not represent a commitment on the part of AVerMedia.
For more information, please visit www.avermedia.com.
AVerMedia is a trademark or registered trademark of AVerMedia Technologies, Inc.
Contact Us
Please let us know here should you have any questions.
AVerMedia | AI.STREAMING
