Product Specification
This product is a TCL TV remote control supporting both Infrared (IR) and Bluetooth (BT) connectivity. The device under test is powered by 2*AAA batteries. It connects directly to the TV for Bluetooth operation. A 3V battery powers the Bluetooth Chip XF2672A. While Bluetooth chips may have different labels, their functionality is otherwise identical. This module utilizes a PCB antenna with a crystal frequency of 40MHz.
Product Details
- Product Name: Remote Controller
- Model Name: RC813A
- Crystal frequency value: 40MHz
- Number of keys: 26
- Battery: 2 x AAA
Bluetooth Features
- Operating frequency range: 2402-2480MHz
- Number of channels: 40CH
- Modulation type: GFSK
- Supported transmission rate: LE 1M/2M
- Antenna type: PCB antenna
Product Dimensions
Unit: mm
The remote control has overall dimensions of approximately 184.48 mm (length) by 42.60 mm (width) by 16.65 mm (height).
The height of the buttons and the top cover is specified as 0.75 ± 0.2 mm.
Antenna Dimensions
The PCB antenna has approximate external dimensions of 5.50 mm by 16.90 mm. Internal features of the antenna layout include measurements of 2.16 mm, 1.00 mm, 5.50 mm, and 6.50 mm.
Common Items
- Work environment: 0°C to 45°C, 20 to 85%RH, 86 to 106Kpa
- Storage temperature: -10°C to 60°C
Regulatory Notices
FCC Notice
The device complies with FCC rules, Part 15. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. The equipment can be used in portable exposure condition without restriction.
ISED Notice (Canada)
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
IC Radiation Exposure Statement
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. The equipment can be used in portable exposure condition without restriction.
