TCL RC813 Remote Controller Instructions

Function Introduction

• This product is customized by TCL and is suitable for some smart Internet TVs of the TCL brand.
• Features ordinary infrared remote control operation and BLE5.1 wireless remote control operation.
• Supports button, voice recognition, and dialogue functions, as well as smart home control functions.

Instructions for Use

• The remote control buttons include: Home, Back, Menu, Up/Down/Left/Right arrow keys, OK key, POWER key, Volume +/-, Set key, Mute key, Voice key, Watch back key, TV Plus key, Input key, Info key, NETFLIX key, Prime Video key, Disney+ key, Amazon Music key, TCLtv+ key, Apps key, Recent key, EPG key, Channel +/- key.
• It can be used as an ordinary infrared button when no TV code is present. After successful TV code pairing, it functions as a BLE5.1 wireless remote control.
• The BLE5.1 wireless remote control function keys include the voice key. TVs with a Bluetooth module supporting BLE5.1 can realize voice recognition and dialogue functions.
• BLE5.1 Remote Control Function User Guide: Pressing the voice button enables voice recognition, dialogue, and voice control. Specific application scenarios may vary by TV set.
• When the remote control and Bluetooth module are replaced separately, the BLE5.1 wireless remote control function can be used only after re-doing the code alignment operation.
• Code alignment method: Turn on the TV. Hold the remote control within 1 meter from the TV. Press the OK button + Home button for more than 2 seconds. The remote control will automatically enter the code alignment state, and the TV terminal will prompt "code alignment start". Upon successful code matching, the message "Code matching succeeded" will be displayed on the TV. If code alignment fails, the message "Code alignment failed" or "Code alignment Timed out" will be displayed. Repeat the preceding steps for code alignment. Code alignment is only required the first time the remote control and TV are paired.
• If the remote control battery is low, the TV will prompt "battery is low, please charge". Replace the battery promptly. Continued use with a low battery may result in the remote control disabling all functions until the battery is replaced.

Specifications

• Remote control: 940nm infrared remote emission
• Power: Two number 7 batteries (3V)

Precautions for Use

• If the remote control is not used for a long time, please remove the batteries and check if the remote control functions normally.
• When not in use, store the remote control in a cool, dry place, away from direct sunlight, heat, and humid environments.
• If you notice abnormal use, such as the battery running out quickly, abnormal heating during use, or deformation/bulging of the remote control shell, discontinue use and contact customer service.
• When operating infrared remote control function keys, point the remote control at the receiving window on the front shell of the host device. Obstructions between the host and the remote control may cause failure.
• If the remote control operation is abnormal or the TV indicates a low battery, replace the batteries immediately.
• To ensure optimal performance, keep the TV away from other 2.4G devices, such as USB WIFI dongles.

IC Caution

English:

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device.

French:

Cet appareil contient un (s) émetteur (s) / récepteur (s) exempté (s) de licence (s) conforme à l'innovation, à la science et au développement économique Canada exempte (s) RSS (s). L'opération est soumise aux deux conditions suivantes: 1. Cet appareil peut ne pas causer d'interférence. 2. Cet appareil doit accepter toute interférence, y compris les interférences pouvant entraîner un fonctionnement indésirable de l'appareil.

FCC Caution

§ 15.19 Labelling requirements.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

§ 15.21 Information to user.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

§ 15.105 Information to the user.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF warning for Portable device: The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure condition without restriction.