ASUS Quick Start Guide

Hardware Explanations

LED Indicators: WPS LED, 6GHz/5GHz/2.4GHz WiFi LEDs, 10GE LAN LED, 10/1GE WAN (Internet) LED, 1GE LAN LED, Power LED.

Buttons: WPS button, LED button, Power switch.

Ports: USB 3.0 port, USB 2.0 port, 1GE WAN/LAN1 port, 10GE WAN/LAN1 port, LAN2-4 ports, 10GE LAN port, Power (DCIN) port, Reset button.

Note on 6GHz Band: If no 6GHz SSID is displayed, ensure your OS and client device support the 6GHz band. Check with your OS and client device provider for Wi-Fi 6E driver release schedules.

Specifications:

• DC Power adapter: DC Output: +19V with max 3.42A current OR +19.5V with max 3.33A current.
• Operating Temperature: 0~40°C (32~104°F)
• Operating Humidity: 50~90%
• Storage Temperature: 0~70°C (32~158°F)
• Storage Humidity: 20~90%

Router Setup Steps

01 Prepare your Modem

1. Unplug the power of your cable/DSL modem.
2. Connect your modem to the WAN port at the back of the router using the provided network cable.
3. Power on the modem by plugging it into the power outlet.
4. Check the modem LED lights to ensure the connection is active.
5. If using DSL, you will need your username/password from your Internet Service Provider (ISP) to configure the router.

02 Install your Router

1. Plug the adapter into the DCIN port and press the Power switch.
2. The Power LED will light up when the hardware is ready.

Setup via App:

1. Download the ASUS Router app from the iOS App Store or Google Play Store.
2. Connect your mobile device to the router's default network SSID (found on the product label) or scan the QR code on the label.
3. Launch the ASUS Router App and follow the on-screen instructions to complete the setup.

Setup via Web Browser:

1. Wired Connection: Connect your PC to a LAN port (LAN2-4) at the back of the router using a network cable.
2. Wireless Connection: Connect to the network with the default SSID shown on the product label (e.g., "ASUS XX", where XX are the last two digits of the 2.4GHz MAC address).
3. Open a web browser and navigate to http://www.asusrouter.com.
4. Follow the instructions in the ASUS Setup Wizard to complete the setup.

02 Start to Use

After setup, the router will reboot and connect to the Internet using the 1GE port.

Gain Another 10GE LAN Port

To set up a 1GE WAN connection and release another 10GE LAN Port:

1. Under factory defaults, connect the modem to the 1GE WAN port with a network cable.
2. Login and Connect: Select "Manual Setting" in the ASUS Setup Wizard.
3. Select "1G WAN" and follow the instructions to complete the setup of SSID and login information.

FAQ / Frequently Asked Questions

Q1: Where can I find more information about the wireless router?

Technical support site: https://www.asus.com/support

Video Tutorials: https://qr.asus.com/wl_videotutorials

Service and Support

ASUS Recycling/Takeback Services: For information on responsible recycling of products, batteries, and packaging, visit http://csr.asus.com/english/Takeback.htm.

REACH: To comply with REACH regulations, chemical substances in ASUS products are published at http://csr.asus.com/english/REACH.htm.

Federal Communications Commission (FCC) Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: no harmful interference, and acceptance of any received interference. This equipment has been tested and found to comply with the limits for a Class B digital device. If interference occurs, try to correct it by reorienting the antenna, increasing separation, connecting to a different outlet, or consulting a technician.

FCC RF Caution Statement: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

FCC RF Exposure Information: This device meets government requirements for RF energy exposure. It is designed and manufactured not to exceed FCC emission limits for RF energy. The Specific Absorption Rate (SAR) limit is 1.6 W/kg. Tests are conducted using standard operating positions. The FCC has granted an Equipment Authorization for this device with all reported SAR levels in compliance. SAR information is on file with the FCC and can be found at www.fcc.gov/oet/ea/fccid.

Prohibition of Co-location: This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.

IMPORTANT NOTE:

• Radiation Exposure Statement: Complies with FCC radiation exposure limits for an uncontrolled environment. Follow operating instructions for RF exposure compliance. This device is restricted for indoor use.
• WARNING: Install and operate according to instructions. Antennas must be installed to provide at least 28cm separation from all persons and must not be co-located with any other antenna or transmitter.
• Operation is prohibited on oil platforms, cars, trains, and aircraft, except in large aircraft flying above 10,000 feet.
• Operation in the 5.925-7.125 GHz band is prohibited for control or communication with unmanned aircraft systems.
• This device is restricted for indoor use.

Compliance Statement of Innovation, Science and Economic Development Canada (ISED)

This device complies with Innovation, Science and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation.

Operation in the 5150-5250 MHz band is only for indoor use to reduce potential interference to co-channel mobile satellite systems.

CAN ICES-003(B)/NMB-003(B)

Radio Frequency (RF) Exposure Information: The radiated output power is below ISED limits. Minimize human contact during normal operation. Install and operate with a minimum distance of 31cm between the radiator and any part of your body.

This device has been certified for use in Canada. Status can be found at: http://www.ic.gc.ca/eic/site/ceb-bhst.nsf/eng/h_tt00020.html. Additional Canadian RF exposure information is available at: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html.

Déclaration de conformité de Innovation, Sciences et Développement économique Canada (ISED): Le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

La bande 5150 - 5250 MHz est réservée uniquement pour une utilisation à l'intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux.

CAN ICES-003(B)/NMB-003(B)

Informations concernant l'exposition aux fréquences radio (RF): La puissance de sortie émise par cet appareil sans fil est inférieure à la limite d'exposition aux fréquences radio d'Innovation, Sciences et Développement économique du Canada (ISED). Utilisez l'appareil sans fil de façon à minimiser les contacts humains lors d'un fonctionnement normal. Cet équipement doit être installé et utilisé avec un minimum de 31cm de distance entre la source de rayonnement et votre corps.

L'utilisation de cet appareil est autorisée au Canada. Pour consulter l'entrée correspondant à l'appareil dans la liste d'équipement radio (REL - Radio Equipment List) d'Innovation, Sciences et Développement économique du Canada, rendez-vous sur : http://www.ic.gc.ca/eic/site/ceb-bhst.nsf/eng/h_tt00020.html. Pour des informations supplémentaires concernant l'exposition aux fréquences radio au Canada, rendez-vous sur : https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html.

Safety Notices

• Use this product in environments with ambient temperatures between 0°C (32°F) and 40°C (104°F).
• Refer to the rating label on the bottom of your product and ensure your power adapter complies with this rating.
• DO NOT place on uneven or unstable work surfaces. Seek servicing if the casing has been damaged.
• DO NOT place or drop objects on top and do not shove any foreign objects into the product.
• DO NOT expose to or use near liquids, rain, or moisture. DO NOT use the modem during electrical storms.
• DO NOT cover the vents on the product to prevent the system from overheating.
• DO NOT use damaged power cords, accessories, or other peripherals.
• If the Adapter is broken, do not try to fix it yourself. Contact a qualified service technician or your retailer.
• To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system.
• DO NOT mount this equipment higher than 2 meters.

Avertissements de sécurité:

• Utilisez ce produit dans un environnement dont la température ambiante est comprise entre 0°C (32°F) et 40°C (104°F).
• Référez-vous à l'étiquette située au dessous du produit pour vérifier que l'adaptateur secteur répond aux exigences de tension.
• NE PAS placer sur une surface irrégulière ou instable. Contactez le service après-vente si le châssis a été endommagé.
• NE PAS placer, faire tomber ou insérer d'objets sur/dans le produit.
• NE PAS exposer l'appareil à la pluie ou à l'humidité, tenez-le à distance des liquides. NE PAS utiliser le modem lors d'un orage.
• NE PAS bloquer les ouvertures destinées à la ventilation du système pour éviter que celui-ci ne surchauffe.
• NE PAS utiliser de cordons d'alimentation, d'accessoires ou autres périphériques endommagés.
• Si l'adaptateur est endommagé, n'essayez pas de le réparer vous-même. Contactez un technicien électrique qualifié ou votre revendeur.
• Pour éviter tout risque de choc électrique, débranchez le câble d'alimentation de la prise électrique avant de toucher au système.
• Ne placez pas cet appareil à une hauteur supérieure à 2 mètres.