Manuals+

Tern DuoStand™ Installation Guide

For HSD Owners, Quick Haul & Short Haul Owners, and NBD Owners

⚠️ Safety Information

If you are unsure how to install this product, please visit your local dealer.

Do not exceed the load limit of 60 kg (132 lb). Please remember the max load limit includes the weight of the bike.

Never leave children or pets on a parked bike unattended.

What's Included

The DuoStand package typically includes:

Additional Kit Required (For HSD Gen 1 Owners Only)

The DuoStand HSD Kit (sold separately) is required to install the DuoStand on the HSD Gen 1. Please see the frame identification section to determine which HSD frame you have.

DuoStand HSD Kit components:

* Use parts from the DuoStand HSD Kit for this step.

Installation

Tools Required (Not Included)

Additional Tools Required for Installation on NBD Bikes

Lubrication Tip: Add anti-seize lubricant to the tip of the bolts before securing the nuts. If anti-seize lubricant is not available, apply any standard lubricant to reduce friction and prevent thread galling.

For HSD Owners

Identify the HSD Frame

Before installation, identify the HSD frame by the kickstand mount located in front of the rear wheel. Tern offers different frame variants, including HSD Gen 1 and HSD Gen 1A. Visual inspection of the mount area will help determine the specific frame type.

Step 1: Remove Existing Kickstand

Remove the existing kickstand from your bike. The specific tool required may differ depending on your bike model.

Step 2: Install Bolt Sets

Install the bolt sets in the order and arrangement shown below, specific to your HSD frame variant.

HSD Gen 1 Assembly Order

For HSD Gen 1 frames, the assembly order is:

  1. Nut
  2. Washer
  3. Wing-shaped plate*
  4. Bushing*
  5. Bike frame
  6. Flat plate
  7. DuoStand
  8. Washer
  9. Bolt*

Ensure bolts are tightened to a torque of 35 Nm - 40 Nm using a 17 mm wrench.

HSD Gen 1A Assembly Order

For HSD Gen 1A frames, the assembly order is:

  1. Nut
  2. Washer
  3. Bike frame
  4. Flat plate
  5. DuoStand
  6. Washer
  7. M10 x 30 Bolt

Ensure bolts are tightened to a torque of 35 Nm - 40 Nm using a 17 mm wrench.

WARNING: Route cables as shown in the diagrams to avoid damage from compression.

For Quick Haul & Short Haul Owners

Step 2: Install Bolt Sets

Install the bolt sets in the order and arrangement shown below for Quick Haul and Short Haul models.

Assembly Order:

  1. Nut
  2. Washer
  3. Bike frame
  4. DuoStand
  5. Washer
  6. M10 x 30 Bolt

Ensure bolts are tightened to a torque of 35 Nm - 40 Nm using a 17 mm wrench.

For NBD Owners

Prepare the DuoStand

  1. Remove DuoStand Ends from the DuoStand.
  2. Measure and use a hacksaw to shorten the legs of the DuoStand by 60 mm. Use a hand file to smooth any metal burrs.
  3. Reinstall the DuoStand Ends and loosely tighten the bolts. Bolts will be fully tightened after height is adjusted in Step 3.

Step 2: Install Bolt Sets

Install the bolt sets in the order and arrangement shown below for NBD models.

Assembly Order:

  1. Nut
  2. Spring washer
  3. Washer
  4. Bike frame
  5. DuoStand
  6. Washer
  7. M10 x 70 Bolt

Ensure bolts are tightened to a torque of 35 Nm - 40 Nm using a 17 mm wrench.

Step 3: Adjust Height and Final Tightening

The recommended clearance from the bottom of the rear wheel to the ground is 10 - 20 mm (2/5" - 4/5"). Measure this distance and adjust the height of the DuoStand by loosening the bolts on the DuoStand Ends to raise or lower the legs. Once the desired height is achieved, tighten the bolts on the DuoStand Ends to a torque of 8 - 9 Nm.

Optional: Install Lockstand™ Extensions

For maximum stability when parked, install the Lockstand Extensions. These are available for purchase from your local Tern dealer.

The Lockstand Extensions are not recommended for installation on the NBD bike model.

Models: HSD Gen 1 Duo Stand, HSD Gen 1, Duo Stand, Stand

File Info : application/pdf, 2 Pages, 1.91MB

PDF preview unavailable. Download the PDF instead.

22-TN-UM-HSD-DuoStand gen2-WEB-v03

References

Adobe PDF Library 16.0.7 Adobe InDesign 17.3 (Macintosh)

Related Documents

Preview DuoStand™ Installation Guide for Tern HSD and Quick Haul Bikes
Comprehensive guide to installing the Tern DuoStand kickstand on HSD Gen 1, HSD Gen 1A, Quick Haul, and Short Haul bicycles. Includes safety, parts list, assembly steps, torque specifications, and warranty information.
Preview Tern E-Bike/Pedelec Operating Manual: Safety, Operation, and Maintenance Guide
Comprehensive operating manual for Tern E-bikes and Pedelecs, covering essential safety guidelines, proper operation, maintenance procedures, and technical specifications for an optimal riding experience.
Preview Tern Shortbed Tray Gen 1: Installation, Features, and Safety Guide
Comprehensive guide to the Tern Shortbed Tray Gen 1, covering installation, weight limits, safety precautions, assembly, and warranty information. Enhance your cycling experience with this versatile cargo solution.
Preview Tern NBD Electric Bike Quickstart Guide: Setup, Features, and Riding
Get started with your Tern NBD urban e-bike. This quickstart guide covers setup, intended use, weight limits, riding instructions, lighting, locking, parking, and folding. Learn about assistance levels and key features.
Preview Tern Versterkt Globale Team met Strategische Aanstellingen
Persbericht van Tern over de aanstelling van Maris Adamovics als Operations Director en Mark Almond voor PR en marketing, ter versterking van het wereldwijde team en de operationele activiteiten.
Preview Tern Cargo Hold 37 Panniers™ Gen 3: User Manual and Product Overview
Comprehensive guide to the Tern Cargo Hold 37 Panniers™ Gen 3, covering features like Flat Fold, Roll-Top Closure, Bucket Mode, installation, specifications, and warranty information.
Preview Tern Cache Box™: Installation Guide and Product Information
Learn how to install the Tern Cache Box™ bicycle accessory. Includes what's included, dimensions, installation steps, and limited product warranty information.
Preview Tern Bike Tow Kit: Installation and Usage Guide
Comprehensive guide for installing and using the Tern Bike Tow Kit, including parts list, preparation steps, installation instructions, and safety guidelines for towing a bicycle.