Bathtub Installation Instruction
For after-sales questions, please contact BaldwinfNancy@outlook.com.
Product Information
Note: Due to the nature of the material, there might be a 20 mm difference from the listed dimensions.
Packing List:
- Bathtub
- Drain Pipe
Nominal Dimensions:
Model#: FS302-1800
Bathtub Size: 71" × 35.4" × 22"
Diagram Description: The document includes diagrams illustrating the bathtub's overall dimensions. One diagram shows a top-down view with measurements: 71 inches length, 35.4 inches width, and 22 inches height. Cross-section views detail the bathtub's profile, indicating dimensions like 71 inches, 70 inches (base length), 28.3 inches (width), 2.8 inches (rim width), 18 inches (depth), 3.2 inches (slope), 19 inches (height), 42 inches (internal length), and 10 inches (internal width).
Important Installation Notes
⚠️ IMPORTANT
Before beginning installation, please read the following instructions and observe all local plumbing and building codes.
- Check the area where the bathtub will be installed to ensure that it is leveled and structurally sound.
- Please unwrap the bathtub and check it carefully for any damage that may have occurred during transportation.
- Store the bathtub in a safe place until you begin installation to avoid damage to the tub's surface.
- It is recommended that the installation of this tub be done by a qualified licensed professional.
- Due to its weight and volume, it is recommended that the installation of this tub be done with the help of at least one other person. A fall, even what may seem like a minor one, could result in cracking of the tub. Moving straps and rubber-gripped gloves are recommended.
Installation Step Diagram Description: The document presents a series of 7 illustrated steps for installation, depicted with simple line drawings and numbered icons:
- Step 1: Shows a bathtub being placed onto a prepared base.
- Step 2: Depicts connecting plumbing or support structures.
- Step 3: Illustrates positioning the bathtub accurately.
- Step 4: Shows the bathtub in its final position, possibly with leveling adjustments.
- Step 5: Represents securing or supporting the bathtub.
- Step 6: Indicates final connections or finishing touches.
- Step 7: Shows the completed installation of the bathtub.
Cleaning and Maintenance
Because resin is a very durable, non-porous material, resistant to scratches, stains, and discoloration, it is very easy to maintain. However, there are a few do's and don'ts that will ensure that your tub does not lose its luster throughout the years.
- Do clean it with a soft dry cloth after use.
- Do not use abrasive cleaners, cleaners containing acid, alkali, or ammonia to remove stains.
- Do not expose the surface of this tub to hair dye or nail varnish, as this may cause stains.
If your tub develops minor scratches, they may be removed by scrubbing gently with fine-grit sandpaper, a soft brush, or a non-abrasive sponge and a mild abrasive cream cleaner. In addition, should the minor scratches remain or you would like to polish the area in question to its original finish, you can perform the following procedure.
Gloss Finish
- Clean the surface with water, making sure no dust remains.
- Using water, polish the area starting with 800-grit sandpaper, then 1500-grit, and finally 2000-grit.
- If a finer finish is desired, you can give it a final sanding/polishing with 3000-grit sandpaper.
- Dry using a clean, dry cloth.
- Wipe up any remaining wax with a clean and dry cloth.
Matte Finish
- Clean the surface with water, making sure no dust remains.
- Using water, polish the area starting with 800-grit sandpaper.
- Wipe up any remaining wax with a clean, dry cloth.
Cleaning Tools Mentioned: The document references the use of a soft dry cloth, a microfiber cloth, and sandpaper for cleaning and polishing.
