LINOVISION IOT-R75W Industrial 5G Cellular Router

Industrial 5G Cellular Router with Dual 5G SIM Cards and RS232/485 IoT Integration

Outstanding Features

Product Image Description: A front view of the LINOVISION IOT-R75W router is shown. It features four prominent black antennas extending upwards, suggesting robust wireless connectivity. The front panel displays several LED indicators, multiple Ethernet ports labeled WAN, LAN1-4, and OPS, along with power and status lights.

Specifications

Hardware System

CPUQuad-core ARM Cortex-A55, 2 GHz
Memory1 GB LDDR4x RAM and 1 GB NAND Flash
Extendable Storage1 x M.2 NVMe SSD Interface

Cellular Interface

Network5G NR SA & NSA/4G LTE/WCDMA
Frequency5G Sub-6: N1/N3/N5/N7/N8/N20/N28/N38/N40/N41/N77/N78
LTE FDD: B1/B3/B5/B7/B8/B20/B28/B32
LTE TDD: B38/B40/B41/B42/B43
WCDMA: B1/B5/B8
Antenna4 × 50 Ω SMA Connectors (Center PIN: SMA Female)
SIM Slot2 (Mini SIM-2FF), 1.8V/3V

Ethernet Interface

Numbers5 x 10/100/1000 Mbps
Property1 x WAN + 4 x LAN
ModeFull or Half Duplex (Auto-Sensing)
Ethernet Isolation1.5 kV RMS
PoE (Optional)4 × 802.3 af/at PoE PSE on LAN Ports

Wi-Fi Interface

Antenna4 × 50 Ω SMA Connectors (Center PIN: RP-SMA Female)
StandardsIEEE 802.11b/g/n/ax 2 x 2 MIMO, 2.4 GHz
IEEE 802.11a/n/ac/ax 2 x 2 MIMO, 5 GHz
Max Bit Rate2.4 GHz: 600 Mbps, 5 GHz: 1200 Mbps

GNSS

Antenna1 × 50 Ω SMA Connector (Center PIN: SMA Female)
TechnologyGPS/GLONASS/BDS/Galileo/QZSS
Positioning Accuracy2m CEP (Open Air)

Serial Interface

Numbers1 x RS232 + 1 × RS485
Connector3.5 mm Terminal Block
Baud Rate300bps to 230400bps

DI/DO

Numbers1 x DI + 1 × DO, Galvanic Isolation
Connector3.5 mm Terminal Block
Digital InputDry Contact
Digital OutputWet Contact, maximum 0.3A@30VDC

Others

USB1 × USB 3.0 (Type-C) for Power Supply, Network Supply and Debug
Reset Button1 × RESET
LED Indicators1 × SYSTEM, 1 x SIM1, 1 × SIM2
Power Connector1 × 2-pin 5.08 mm Terminal Block, with Surge-Protection and Reverse Polarity Protection
Built-inWatchdog, Timer

Power Supply and Consumption

Power Input9-48 VDC by Power Connector (48V is need for PoE)
Power Output (Optional)5V, 3A by Type-C Port
4 × 802.3 af/at PoE PSE on LAN Ports
Per Port 30W Max., Total 60W Max.
Power Consumption (In Non-PoE mode)Without Wi-Fi: Typical 2.8 W, Max 5.5 W
With Wi-Fi: Typical 7 W, Max 13.7 W

Physical Characteristics

Ingress ProtectionIP30
Housing & ColorMetal, Black
Weight567.2g
Dimension135 x 115 x 36.4 mm (5.31 x 4.53 x 1.43 in)
InstallationDesktop, Wall or DIN Rail Mounting

Environmental

Operating Temperature-40°C to +70°C (–40°F to +158°F)
Storage Temperature-40°C to +85°C (–40°F to +185°F)
Relative Humidity0% to 95% (Non-condensing) at 25°C/77°F
ApprovalsCE, RCM
RegulatoryRoHS

Network Protocols & Features

Network ProtocolsIPv4/IPv6, TCP, UDP, DHCP, HTTP, HTTPS, ARP, NTP, DNS, SSH, VLAN, DDNS, SNMP, MQTT, MQTTS, etc.
RoutingStatic Routing
DDNSSupported >14 service providers, others can be configured manually
IP PassthroughSupport to assign WAN IP address to the device on LAN
ReliabilityWAN Failover, Dual SIM Backup
Diagnostics ToolsPing, Traceroute, Nslookup, TCPDUMP, Logs, Cellular AT Command Debugger, Firewall iptables Debugger
Wi-Fi Interface ModesAP or Client mode
Wi-Fi SecurityWEP/WPA/WPA2/WPA3 authentication, WEP/TKIP/AES encryption
Wi-Fi MAC FilterBlacklist, Whitelist
GNSS ProtocolNMEA0183
GNSS ModeSupport reading by Serial Port, MQTT, TCP Client/Server, UDP Server
GNSS SecurityAccess Control, DMZ, Port Mapping (DNAT), SYN-Flood Protection, Filtering(IP&Domain), Custom iptables Rules
FirewallsPort and tag-based VLAN separation
VLANMultiple Levels of User Authority
Multilevel AuthorityMultiple Clients and a Server Support
VPN OpenVPNMultiple Clients and a Server Support
VPN IPsecL2TP Client Support
VPN L2TPPPTP Client Support
VPN PPTPTransparent(TCP Client/Server, UDP Server, MQTT Client), Modbus TCP/RTU Client, Modbus Gateway (Modbus RTU to Modbus TCP)
Serial ModeSupport reading by SMS, MQTT
Digital InputSupport triggering by DI, SMS, MQTT
Digital OutputNode-RED
App Management ConfigurationWeb, SNMP v1/v2c/v3, DeviceHub
App Management UpdateWeb, DeviceHub
App Management Device ManagementDeviceHub, OpenVPN
SNMPSNMP v1/v2/v3, Support SNMP Trap
SMSSend/Receive SMS, SMS Control
Event AlarmSystem Startup/Reboot, Network Up/Down, Link Switch, VPN Up/Down, Cellular Traffic Monitoring, etc.

Hardware Overview

Hardware Overview Diagram Description: The diagram shows the rear and top views of the router. Key components are labeled: Wi-Fi Antenna Connector, LED Indicator Area, Ethernet Port, GPS Antenna Connector, Grounding Stud, Reset Button, SIM Card Slot, Serial & IO port, Power Connector, and USB Type-C Port. The cellular antenna connector is also indicated.

Accessories

Dimensions (mm)

Dimensions Diagram Description: Two views of the router are provided to show its physical size. The top view shows a rectangular device with dimensions 135 mm (width) and 115 mm (depth). The front view shows a similar width of 135 mm and a height of 36.4 mm, with various ports visible.

PDF preview unavailable. Download the PDF instead.

IOT-R75W datasheet WPS 演示

Related Documents

Preview Linovision Cellular Routers: A Selection Guide
Compare the specifications of Linovision's IoT-R32L, IoT-R32W, and IoT-R75W cellular routers to find the best fit for your needs.
Preview Linovision IOT-R75W Quick Start Guide
A quick start guide for the Linovision IOT-R75W industrial cellular router, detailing installation, hardware overview, and basic network configuration steps.
Preview Linovision IOT-R32 Industrial Cellular Router Quick Start Guide
This guide provides essential information for installing and configuring the Linovision IOT-R32 industrial cellular router, including hardware setup, PC configuration, and network connection methods (WAN and cellular).
Preview LINOVISION IOT-R41: Industrial 4G LTE Router - Specs & Features
Explore the LINOVISION IOT-R41, a compact, low-power industrial 4G LTE router. Features include GPS, RS232/RS485, DI/DO, wide voltage input, and industrial design for reliable connectivity in harsh environments.
Preview Linovision IOT-R32W Industrial 4G LTE Cellular Router Specifications
Detailed specifications for the Linovision IOT-R32W Industrial 4G LTE Cellular Router, including network connectivity, protocol support, industrial design, security features, hardware and software specifications, and package contents.
Preview LINOVISION IOT-R51W vSIM Routers User Manual
User manual for the LINOVISION IOT-R51W vSIM Router, covering installation, PC connection, web platform access, WiFi settings, use cases, and troubleshooting.
Preview Linovision IoT-R32L Industrial Cellular Router Quick Guide
A concise guide to installing and configuring the Linovision IoT-R32L industrial cellular router, covering hardware overview, installation, login, and network setup.
Preview LINOVISION IOT-R32W Router: DI/DO Instructions Guide
Comprehensive instructions for the LINOVISION IOT-R32W Router, detailing its Digital Input (DI) and Digital Output (DO) functionalities, connection diagrams, configuration via SMS, CLI, Modbus TCP, and Modbus RTU.